|
|
|
Extraction Pumps: These pumps feature a large suction opening to promote filling of gear teeth when suction pressure is at full vacuum. The jacketed housing is stainless steel; gears/ shafts are one piece construction, made from nitrided alloy steel; bearings are of alloy tool steel.
|
|
|
Liquiflo gear pumps are manufactured from high-alloy materials such as 316 Stainless Steel, Alloy-C and Titanium and a variety of corrosion-resistant and wear-resistant internal materials. Liquiflo gear pumps can be configured with packing, single or double mechanical seals or magnetic-drive. These options allow Liquiflo gear pumps to be specially engineered to handle many difficult chemicals - such as polymers, solvents, acids, caustics or other corrosive liquids - over a wide range of viscosity, pressure and temperature. Liquiflo gear pumps are typically used for metering, circulation, transfer and injection applications.
|
|
GSX Series Stainless Steel, Double Helical, Rotary Gear Pumps
- Double Helical Herringbone Gears provide quiet, pulse-free flow with better load carrying ability, greater strength and minimum hydraulic shock.
- High Speed Pump Capability eliminates the need for expensive speed reduction accessories and allows the use of off-the-shelf motors.
- Between Bearing Design virtually eliminates shaft deflection, even while accommodating heavy, highly viscous loads.
- Standard Babbitted Carbon Sleeve Bearings are self-lubricated for handling low viscosity fluids. Bronze bearings are available for dirty fluid applications.
- Inherently Hydraulically Balanced Design eliminates end thrust and the need for thrust bearings.
- Convertible Stuffing Box allows ample packing or mechanical seals to be used for greater flexibiltiy.
|
|
|
|
|
|
Chemical gear pumps GX series
Both high viscosity and low viscosity liquids can be handled
When a low-viscosity liquid is handled by a conventional gear pump, "jamming" and "seizing" tend to occur. SiC ceramic gears do not have this problem even when the pump functions at a high speed. Silicon nitride ceramic gears show stable performance in handling high viscous liquids, due to their strength and toughness.
Ability to handle fine slurries
Now that gears and other sliding components including bearings are made of ceramic, the handling of fine slurries hard and soft will not impair the longevity of these pumps. Performance has been noticeably improved. Ceramic gears make it possible to reduce spaces between parts, therefore out performing conventional metal gear models.
Quiet liquid transfer with less pulsation
Without the pulsation that is common to reciprocating pump and general use type gear pumps, liquid is transferred quietly and smoothly no agitating or foaming.
High self-priming ability
Because the suction port is at the top of the pump, the pump chamber remains full when pump stops working. Self-priming is enhanced at re-start.
Constant flow injection
Regardless of the temperature change, viscous liquid can be handled at accurate flow rate, which can not do with other pumps. As the output is linearly related to rpm, the flow rate is easily controlled by changing speed.
|
|
G Series Gear Pumps
G-series is designed for metering, booster, vacuum extraction, lubrication and transfer of a great variety of fluids in any industrial application. Continually updated, more than forty years of experience and development are invested in this series, making it the meeting point for quality and practicality.
Materials
Housing: Cast Iron G25
Rotors: Steel 39NiCrMo3
Bearings: PTFE on Stainless Steel
Sealing Elements: Various
Application
Viscosity: from 1CST to 1'000'000CST
Pressure: from 0BAR to 30BAR
Size: from 1.5cc/rev to 300cc/rev
Temperature: from -10°C to +240°C
|
|
|
Liquiflo H-Series Gear Pumps are manufactured from 316 Stainless Steel or Alloy-C, and are available in both Sealed and Mag-drive configurations. These pumps are available in a wide variety of internal materials to pump a broad range of chemicals, such as polymers, solvents, acids, caustics and other corrosive liquids.
|
|
|
Liquiflo Max-Series Gear Pumps are manufactured from 316 Stainless Steel or Titanium, and are available in both Sealed and Mag-drive configurations. These pumps feature Helical gears and relieved wear plates for smoother and quieter operation and intrinsic reduction of gear separation forces. Their unique and durable design will assure extended life in high-pressure pumping applications.
|
|
High Pressure Internal Gear Pumps QX
The QX pumps are the 5th generation of Bucher internal gear pumps, which have proven themselves in thirty years of service around the world. The straightforward and rugged construction guarantees long service life without the need for extensive maintenance. Tandem and multiple pumps are available worldwide in more than 1000 variants.
Advantages
- High pressures
- Low noise level
- Long service life
- Negligible flow and pressure pulsations
- Insensitive to contamination of the fluid
|
|
|
DPP offers an assortment of quality gear pumps used in a wide range of applications, from critical medical devices to ink jet printing; from laboratory analysis equipment to water purification systems; all superbly manufactured to the highest possible standards. Tests show that the consistency of our product performance is second to none, which makes DPP the first choice for very low pulse-less flow or low noise application requirements.
|
|
Tuthill lubrication and circulation pumps handle many viscosities and sustain a constant flow at any pressure. With only two moving parts the internal gear design allows the pump to handle more viscosities than it's competitors.
Simple, Compact Design offers high efficiency and longer life.
Positive Reversing Action - The unique reversing feature allows the lubrication and circulation pumps the ability to reverse flow without the use of valves.
1000 Series
- Internal gear pump design
- Flow rates to 13.7 usgpm (3M3/hr)
- Pressures to 300 psi (20.7 bar)
- Multiple porting options with side ports as standard
- Cast iron construction
|
|
Tuthill lubrication and circulation pumps handle many viscosities and sustain a constant flow at any pressure. With only two moving parts the internal gear design allows the pump to handle more viscosities than it's competitors.
Simple, Compact Design offers high efficiency and longer life.
Positive Reversing Action - The unique reversing feature allows the lubrication and circulation pumps the ability to reverse flow without the use of valves.
L Series
- Internal gear pump design
- Compact and flexible drive options
- Available with positive reversing feature
- Flow rates to 13.7 usgmp (3m3/hr)
- Pressures to 500 psi (34.5 bar)
- Standard with single mechanical seal
- Cast Iron Construction
|
|
Stainless steel gear dosing pump with magnetic coupling
Metering pump for the food industry with flushing connections and passages for CIP cleaning
HP radial piston pump (closed design)
HP radial piston pump submersible (open design)
|
|
|
Diener Precision Pumps manufacture the highest quality and most accurate precision external magnetic drive gear pumps in the world. With flow ranges from 5 ml/min to 10 L/min our pumps are designed to give optimum performance over a wide range of applications.
|
|
Miniature Magnetically Coupled Pumps > T Series
- Flow Rates from 5 to 650 gph (2460 L/hr)
- Differential pressures to 250 psi (17.2 bar)
- ATEX approved
|
|
|
Leak-free external-gear pumps that provide precise, non-pulsing flows from 1 ml/min to 10 USGPM (38 lpm), differential pressures to 250 psi (17.2 bar), system pressures to 500 psi (34.5 bar), temperatures to 350°F (176°C), viscosities to 2000+ cps
|
|
|
Liquiflo's 4-Series pumps are low-flow magnetically-driven gear pumps. The 4-Series housings are manufactured from Bar Stock in 316 Stainless Steel, Alloy-C or Titanium. With several material options for shafts, gears, wear plates and bearings, these pumps can be used in a wide variety of chemical processing applications.
|
|
Magnetic drive gear pumps MDG series
Leakage free, sealless structure
The pump mechanism is the magnetic drive type. Free of leakage trouble, the pump is suitable to be incorpotated in various equipment.
Superior corrosion resistance
The wetted parts are manufactured from superior corrosion-resistant materials such as stainless steel, PPS, and PEEK. Therefore, the pump can be used to transfer various types of chemical solutions.
Long life design
Each part that is precision processed using Iwaki's original technology excels in thermal resistance, therefore does not cause pump troubles due to thermal expansion of the parts. Even when operated for long continuous hours, the pump should exhibit superior durability.
|
|
|
DPP offers an assortment of quality gear pumps used in a wide range of applications, from critical medical devices to ink jet printing; from laboratory analysis equipment to water purification systems; all superbly manufactured to the highest possible standards. Tests show that the consistency of our product performance is second to none, which makes DPP the first choice for very low pulse-less flow or low noise application requirements.
|
|
Process Pumps - GlobalGear®
- Back pull-out design provides ease of maintenance
- Flow rates to 550 usgpm (124.9 m3/hr)
- Pressures to 200 psi (13.8 bar)
- Viscosities to 1,000,000 ssu (220,000 cst)
|
|
Together with our standard stainless steel materials matching, we can offer special stainless steels, titanium or bronze.
Temperature ranges up to 350 degrees C. e.g. pumps for thermo oils.
High capacity - external gear pump
Gear dosing pump Stainless steel gear dosing pump in special design
HP radial piston pump (closed design)
High capacity internal gear pumps with integral pressure limiting valve for low noise operation
|
|
S Series Gear Pumps
S-series gear pumps are designed for the chemical, food and pharmaceutical industries. The use of stainless steel and other corrosion resistant materials allows the transfer of aggressive fluids.
This series is also suitable for pumping biodegradable products that require pumps cleaning by a “CIP cycle”.
Materials
Housing: Stainless Steel AISI316L
Rotors: Stainless Steel S31803 Duplex
Bearings: PTFE on Stainless Steel
Wear Plate: Fitted Glass
Sealing Elements: Various
Application
Viscosity: from 1CST to 1'000'000CTS
Pressure: from 0BAR to 30BAR
Size: from 1.5cc/rev to 1330cc/rev
Temperature: from -40°C to +240°C
|
|
Series 9000C-O
This planetary oil-bath gear drive pump achieves up to 110-117 gpm (416-443 lpm) and 80 psi (5.5 bar). The series includes models 9000C-O, 9006C-O, 9008C-O, 9016C-O, 9018C-O, and 9028C-O.
Series 9000C-O-SP
This self-priming gear driven pump achieves up to 115-119 gpm (435-450 lpm) and 77 psi (5.3 bar). The series includes models 9006C-O-SP and 90016C-O-SP.
Series 9000P-O
This planetary oil bath gear driven pump achieves up to 94-99 gpm (356-375 lpm) and 80 psi (5.5 bar). The series includes models 9006P-O, 9008P-O, 9016P-O and 9018P-O.
|
|
|
Liquiflo's original 3-Series Gear Pumps are manufactured from 316 Stainless Steel, Alloy-C or Alloy-20 and are available in Sealed or Mag-drive configurations with flows up to 55 GPM and differential pressures up to 100 PSI.
|
|
Internal gear pumps from Micropump. No other technology offers precise and accurate fluid delivery with the same high-pressure and low-flow rate capabilities in such a small package. Tiny micro-annular pumps are suitable for low viscosity liquids such as deionized water, methanol, solvents, oil, and lubricants. High-precision rotors provide accurate flow rate control, helping conserve valuable liquids. Internal gear technology keeps pulsation to an absolute minimum for smooth, constant flow.
Product Summary
- Dispense rates as small as 0.5 microliters
- Flow rates to 288 ml/min
- Accuracy within +/- 1%
- Max. differential pressure 80 bar
- Max. temperature 60 degrees C
|
|
|
External gear units are classic hydraulic units and come in the form of pumps and motors. Individual pumps, multiple pumps and lownoise SILENCE versions in seven different series open up a virtually unlimited range of possible uses.
|
|
|
this pump is suitable to carry oils,such as thick oill, diesel fuel and lubricator,animal and vegetable oil etc,also it is available to transport the fluidities with low flashing point by equipped with copper,gear such as gasolene and benzene,etc,take care that the media temperature shouldn it surpass 70 ℃ and the available temperature of oilpump against hitemperature shouldn it more than 300℃.the pump has safety valve itself when the pump works under the high pressure,shaft seal has skeleton oil seal,mechanical seal and stuffing seal,please it should be indicuted when placing order.
|
|
General description :
GATHER Industrie’s magnetic drive gear pump is made from stainless steel, Hastelloy or titanium and may be used as dosing pump, process pump or for laboratory service. The hermetically sealed gear pumps convey and meter in a non-pulsating manner even non-lubricating liquids such as water, salt solutions, solvents, acids and caustic solutions. As low-maintenance process pumps they can be optimally integrated into existing systems; when used for metering or dosing service they enable highly precise and reproducible flow rates to be attained. Based on the magnetic coupling and making use of new materials GATHER Industrie constantly advances the pumps originally intended for laboratory service to optimum acid or caustic solution pumps used in pilot facilities (miniplant) and for process technological applications. It goes without saying that the pumps meet the requirements of the Pressure Vessel Code and are ATEX compliant for use in hazardous areas.
|
|
| ... products without technical information |
| |
|
|