|
|
Verdergear gear pumps for laboratory (max 550 l/h)
Verdergear gear pumps for industry (max 10000 l/h)
Verdergear inner geared gear pumps (high viscous fluids)
Verdergear Micro Electronic sealless gear pumps
All pumps are constructed according to the suction shoe principle. This suction shoe style design compared to the cavity styled pumps results in a higher efficiency.
|
|
|
The Universal Mag Drive is the ideal sealing technology for critical liquid containment applications within Viking’s Universal Seal product line. It is dimensionally interchangeable with Viking's Heavy Duty bracketed and Universal Seal pumps, allowing for easy upgrade from packed or mechanical seals to sealless technology. The Universal Mag Drive’s hermetic, static sealed canister provides the highest level of liquid containment available by eliminating traditional dynamic shaft seals. It also eliminates housekeeping issues and downtime due to seal failure. This product is designed to handle a broad range of applications requiring continuous duty at pressures up to 200 PSI (14 Bar).
|
|
|
Viking Mag Drive® sealless internal and external gear pumps eliminate leakage and maintenance associated with shaft seals. For use with all hazardous/toxic fluids, hard-to-seal liquids and for 24/7 operations which cannot afford unscheduled downtime due to seal failure. Some models allow reversible direction of flow, and temporary run-dry capability. May be close-coupled to IEC or NEMA motors, or long-coupled with optional bearing carrier. ATEX conformity available.
|
|
|
|
|
|
|
The CMD series is a groundbreaking new series of sealless, non-metallic pumps specially designed for crucial liquid containment applications. This series offers several important benefits, including: 100% renewable performance with use of Viking’s recommended spare parts kit; an innovative magnet system with a patent-pending spline design that allows the magnet to self-align while floating on the shaft with no added fasteners; self-lubricating, heavy-duty bearings with patent-bearing geometry that allow dry-run capabilities; and, a unique, universal flange that allows for easy installation for both ANSI and DIN flanged systems, among other key benefits. In addition, the CMD series offers extreme flexibility, including an array of models with port sizes ranging from .25” to 1.5” (6.35 to 38.1 mm), a performance level of 100 SSU (22 cSt), normal capacity at 1450 RPM ranging from 0.34 to 30 GPM (1.3 to 120.0 LPM), normal capacity at 1750 RPM ranging from 0.4 to 33.0 GPM (1.5 to 125.0 LPM), a maximum differential pressure of 150 PSI (10 Bar), a maximum hydrostatic pressure of 200 PSI (14 Bar), approximate shipping weights ranging from 4 to 44 pounds (2 to 20 kg), and a maximum recommended operating temperature of 150°F (65°C).
|
|
Stainless steel gear dosing pump with magnetic coupling
Metering pump for the food industry with flushing connections and passages for CIP cleaning
HP radial piston pump (closed design)
HP radial piston pump submersible (open design)
|
|
|
Diener Precision Pumps manufacture the highest quality and most accurate precision external magnetic drive gear pumps in the world. With flow ranges from 5 ml/min to 10 L/min our pumps are designed to give optimum performance over a wide range of applications.
|
|
|
Leak-free external-gear pumps that provide precise, non-pulsing flows from 1 ml/min to 10 USGPM (38 lpm), differential pressures to 250 psi (17.2 bar), system pressures to 500 psi (34.5 bar), temperatures to 350°F (176°C), viscosities to 2000+ cps
|
|
Miniature Magnetically Coupled Pumps > T Series
- Flow Rates from 5 to 650 gph (2460 L/hr)
- Differential pressures to 250 psi (17.2 bar)
- ATEX approved
|
|
|
Liquiflo's 4-Series pumps are low-flow magnetically-driven gear pumps. The 4-Series housings are manufactured from Bar Stock in 316 Stainless Steel, Alloy-C or Titanium. With several material options for shafts, gears, wear plates and bearings, these pumps can be used in a wide variety of chemical processing applications.
|
|
Magnetic drive gear pumps MDG series
Leakage free, sealless structure
The pump mechanism is the magnetic drive type. Free of leakage trouble, the pump is suitable to be incorpotated in various equipment.
Superior corrosion resistance
The wetted parts are manufactured from superior corrosion-resistant materials such as stainless steel, PPS, and PEEK. Therefore, the pump can be used to transfer various types of chemical solutions.
Long life design
Each part that is precision processed using Iwaki's original technology excels in thermal resistance, therefore does not cause pump troubles due to thermal expansion of the parts. Even when operated for long continuous hours, the pump should exhibit superior durability.
|
|
Conventional sealing gaskets are pushed to their limits with
different applications. Typical applications are found in
polyurethane facilities, refrigerating machines and vacuum
facilities. For these applications, you have the possibility
to equip the KF 4…80 with a magnetic coupling.
The magnetic coupling serves as a shaft seal and for the
transmission of the torque. The outer rotor of the magnetic
coupling is assembled on the engine shaft and the inner
rotor is assembled directly on the pumping shaft. The
torque is transmitted through the magnetic forces between
the outer and inner rotor. Between the two rotors, you
have the split case which hermetically seals the pump.
|
|
General description :
GATHER Industrie’s magnetic drive gear pump is made from stainless steel, Hastelloy or titanium and may be used as dosing pump, process pump or for laboratory service. The hermetically sealed gear pumps convey and meter in a non-pulsating manner even non-lubricating liquids such as water, salt solutions, solvents, acids and caustic solutions. As low-maintenance process pumps they can be optimally integrated into existing systems; when used for metering or dosing service they enable highly precise and reproducible flow rates to be attained. Based on the magnetic coupling and making use of new materials GATHER Industrie constantly advances the pumps originally intended for laboratory service to optimum acid or caustic solution pumps used in pilot facilities (miniplant) and for process technological applications. It goes without saying that the pumps meet the requirements of the Pressure Vessel Code and are ATEX compliant for use in hazardous areas.
|
|
| ... products without technical information |
| |
Hall sensors have proved to be the most reliable technology for revolution measurement. DIS has been using Hall technology for over 10 years in the Quadro-Flux series. There is choice from a range of I/O circuits and housing options to measure revolution up to 25 KHz. For direction indication or fail safe options we offer dual circuits for phase shifted signals.
Measuring range: 0 - 25 KHz max.
Supply voltage: 5Vdc of 10 - 30 Vdc
Output: PNP, NPN or totem pole
Temperature range: -25 tot + 150ºC
Protection class: < IP68 (submersible)
|
|
The POSIMAG length measuring system comprises an MR scanning head and a magnetic dimensional scale. The position is determined without contact and thus without wear or tear. This measuring setup supports resolutions in the µm range.
POSIMAG is suitable for linear, angluar and speed measurements.
Technical advantages:
Sturdy construction, contact-free and wear-free, shielded metal housing, protection category up to IP67, signal processing as standard with encoders, distance between the MR sensor head and the magentic strip up to 2 mm, measuring lengths of up to 30,000 mm.
Thanks to its special properties, POSIMAG is ideal for many industrial applications in the production of machinery, plants and precision equipment as well as research. For example: Metal and wood processing, manual tasks in handling systems, positional checks for linear units, quality-control systems for sheet metal, punches and presses.
|
|
Rotary magnetic coders
the magnetic coder of impulses MDFK consists of a polar wheel and a detector resistive tape recorder. It is let install in the same way that a conventional incremental coder.
|
|
|
|
|
|
The LM10 features a compact sealed readhead that rides at up to 1.5 mm from the self-adhesive magnetic strip scale, with up to 100 m travel.
Simple to install, the LM10 features an integral set-up LED on the readhead, wide installation tolerances and an applicator tool for the adhesive-backed magnetic scale. A bidirectional reference is provided that can be actuated either by a preset mark integrated within the scale or by adding a reference sticker on top of the scale with the help of a self aligning installation tool.
The encoders come in digital or analogue output variants and offer a range of customer selectable resolutions 1 µm, 2 µm, 5 µm, 10 µm, 20 µm and 50 µm. At 1 µm the LM10 offers a maximum velocity of 4 m/s.
Engineered for extreme service, the solid-state LM10 linear encoders operate from -20 °C to +85 °C, have water-proof sealing to IP68, and are highly resistant to shock, vibrations and pressure. The robust magnetic scale is also resistant to a range of chemicals commonly found in industry. The non-contact, frictionless design eliminates wear while reducing hysteresis for high precision at high speeds and acceleration.
LM10 encoders bring reliable solutions to tough, hard-working applications including woodworking, stone-cutting, sawing, metalworking, textiles, packaging, plastics processing, automation and assembly systems, water-jet cutting, and electronic chip/board production.
|
|
With the magnetic distance- and angle measuring systems of SIKO, compact single systems can be assembled. The challenges faced by measuring devices in extreme industrial conditions make great demands on their reliability and reproducibility. MagLine systems are mainly used for extremely precise tracking of linear and radial positions as well as speeds and angles. The contactless technology demonstrates its advantages in all kinds of applications, such as motor feedback or highly dynamic processes in particularly dirty environments.
Benefits:
- No-wear technology
- Insensitive to dust, chips, humidity, oil, fats, etc.
- Highly resitant to schock and vibrations
- Easy handling and mounting
|
|
Merit ME110
Battery powered digital readout with the following fixing ways :
1) panel mountable by relevant brackets
2) surface mountable by metallic supports
Flexible cable max lenght 2 meters.
Magnetic reader head with small dimension.
Fixing by M3 or M4 screws.
Wide aligning tolerances.
To be used with magnetic tape Givi MP200.
Resolution (programmable): 1 - 0,1 - 0,05 - 0,01 mm
0,01 - 0,001 - 1/16 - 1/32 - 1/64 inch
1° - 0,1° - 0,01° - 0,001° angolare
Accuracy: ± 30 µm
Repeatibility: ± 1/2 digit
|
|
MTS
High precision and reliability reading transducer.
Main features:
- Strong and compact metal case.
- Advanced technology in small dimensions.
- High resistance to vibrations and accelerations.
- Protection IP67 (according to the norm DIN 40050/IEC 529).
- Wide range of available resolution.
MP200
Magnetic band GIVI MP200 is composed by a magnetic strip, which is polarized at regular distances of 2+2 mm and supported by a stainless steel carrier.
Extremely easy mounting to the operating machine. As an optional, the magnetic band is supplied with a magnetically transparent stainless steel cover for physical protection; for its fixing an adhesive tape is pre-mounted
|
|
- 7-digit LCD-display
- Sign and special characters
- Battery-status display
- Easy mounting
- Up to 3 external magentic sensors (switchable)
- Millimeter or inch operation possible
- Inch mode with fraction display
- Switch-over between incremental and absolute measuring
- Adjustable reference value
- Adjustable multiplication factor
|
|
Non contact magnetic linear encoder mod. МТ with measuring length up to 50 m. The encoder is used to convert linear displacements of machine key components into electrical signals containing information about the value and direction of the displacement.
Model MT
Type: Magnetic;
Measuring length, m: from 1 to 50;
Resolution, µm: 0,5...500;
Output signals/Power supply: TTL/ 5...28 V;
Accuracy: ±30...±70 µm/m (depending on resolution).
|
|
|
|
|
|
MLS 1
- Non Contacting Incremental System
- Very small measuring head ( metal enclosure)
- Wide range of available resolution up to 1 µm
- Protection class IP67
- Measuring lenghts are up to 100 meter
- Resistant to humidity
- Wide mounting tolerances
- Robust shielded aluminium
- Incremental outputs A, /A, B, /B and Z Reference signal (without or one reset signal by start, or every 5 mm)
- Output signal Push-pull, TTL or RS422 line driver
MLS 2
- Tape in flat aluminium profile
- Wide range of available resolution up to 1 µm
- Protection class IP67
- Measuring lenghts are up to 100 meter
MLS 3
Sensor Head in slide carrier with sealed high aluminium profile
Sealed linear encoders are protected from dust, chips and splash fluids and are ideal for operation on machine tools. An aluminium housing and elastic sealing lips protect the magnetic tape, scanning carriage and guideway from chips, swarf, dirt and splashwater. The scanning carriage travels in a low-friction guide within the scale unit. It is connected to the external mounting block by a coupling that compensates unavoidable misalignment between the scale and the machine guideways.
MLS 4
Self-Aligned System
MLS4 is designed for press brake and bending machine applications.
- Double protection along the sliding side (four lip seals)
- Self aligned
- With integrated guide
- Large mounting tolerances
- Self-adjustment of the clearance between the guide and the carriage.
- Shielded and armoured power cable with a stainlesssteel braid.
- Functional-calibration hybrid circuit.
- Excellent stability of the signals
- Positive or negative signals via Line-Driver outputs
- Compressed air inlet inlets at the scale end blocks
|
|
GMIX2
- predestined for tasks in storage- or conveyor-techniques
- resolution of 2.5 mm (4 edge-triggered)
- repeating accurancy +/- 2.5 mm
- compact sensor with integrated translator circuit
- speed propotional square wave outputs
- high protection class of IP67
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
