|
|
Standard Features:
- Compact Footprint (17" x 33" of floorspace)
- M-code selectable high and low pressure
- Dual Filter version minimizes service downtime
- Pump Water Based Coolants or Cutting Oils
- Adjustable Discharge Pressure to 1000 psi (70 Bar)
- High Capacity Bag Filter, 10-mic Std.
- Integrated Pressure Switch for automatic filter monitoring
- Inlet/Outlet Gauges to monitor Filter Condition
- Uses Low-Cost Bags
- Coolant and thermal alarms
- 208 - 230VAC Standard, 440 - 480VAC Available
- 12 foot modular cables
- 20 foot high pressure hose
Optional Features:
- Abrasive duty construction for grinders
- Machine prep kit for quick change portability
- Integrated coolant transfer pump
- OEM Interface Kits
- NF Non-filtered units
|
|
Gear pumps are used in all types of manufacturing industries for the transportation of both thin and thick liquids, from choccolate to diesel fuel. Our gear pumps have sturdy design, offering high reliability as well as long life.
Johnson Pump's gear pump design is based on an internal idler gear rotating inside of a larger rotor. Internal gear pumps are robust, give an even flow, handle both low and high viscosity products, are capable of high pressure and are self-priming.
Johnson Pump manufactures the TopGear-series of internal gear pumps; with the TG L-range for low viscosity - high volumetric efficiency, TG G-range for general purpose and the TG H-range for high demanding applications.
|
|
Gear pumps are used in all types of manufacturing industries for the transportation of both thin and thick liquids, from choccolate to diesel fuel. Our gear pumps have sturdy design, offering high reliability as well as long life.
Johnson Pump's gear pump design is based on an internal idler gear rotating inside of a larger rotor. Internal gear pumps are robust, give an even flow, handle both low and high viscosity products, are capable of high pressure and are self-priming.
Johnson Pump manufactures the TopGear-series of internal gear pumps; with the TG L-range for low viscosity - high volumetric efficiency, TG G-range for general purpose and the TG H-range for high demanding applications.
|
|
Maag Pump Systems gear pumps are displacement pumps for high pressure environments. Their performance and long lifespan increase the efficiency of your manufacturing plant. They are used in diverse processes as feed, reactor discharge and booster pumps for low and high-viscosity applications.
The new extrex® 70-5 HV gear pump has a maximum ∆p of 200 bar and a 25% higher specific volume due to its wider gear design. The new extrex® gear pump is also available in models such as HP for ∆p up to 400 bar, RB for rubber processing, and the standard GP for regular extrusion process applications.
|
|
|
Maag Pump Systems gear pumps are displacement pumps for high pressure environments. Their performance and long lifespan increase the efficiency of your manufacturing plant. They are used in diverse processes as feed, reactor discharge and booster pumps for low and high-viscosity applications.
|
|
Rotary Lobe Pumps - TopLobe and TopWing
The original design of the rotary lobe pump goes back to the early 40’s and has since then been further developed and improved. Johnson Pump has long experience in rotary lobe pumps. Market knowledge and appreciation of customer needs have been used to improve the existing rotary lobe pump concept with new features and customer benefits.
Rotary lobe pumps are easy to clean and have gentle product handling characteristics. They contain few cavities, which reduces the risk of bacterial growth and makes them particularly suitable for the transport of sensitive fluids – from glue to whole strawberries.
|
|
Gear pumps are used in all types of manufacturing industries for the transportation of both thin and thick liquids, from choccolate to diesel fuel. Our gear pumps have sturdy design, offering high reliability as well as long life.
Johnson Pump's gear pump design is based on an internal idler gear rotating inside of a larger rotor. Internal gear pumps are robust, give an even flow, handle both low and high viscosity products, are capable of high pressure and are self-priming.
Johnson Pump manufactures the TopGear-series of internal gear pumps; with the TG L-range for low viscosity - high volumetric efficiency, TG G-range for general purpose and the TG H-range for high demanding applications.
|
|
TopGear MAG - Protecting your future
TopGear MAG is a range of leak-proof internal gear pumps for low and high viscous liquids which are corrosive, toxic, aggressive or expensive.
Total containment of the liquid inside the pump is achieved using a hermetically sealed can, which isolates the liquid from the surrounding environment. This eliminates the need for shaft seals and the associated wear and leakage that would normally be experienced. The Magnetic Drive pumps are therefore not only environmentally friendly – they also contribute to improved safety in chemical and process plant environments.
Complying amongst others with the “ATEX” (ATmospheres EXplosibles) directive, magnetic drive pumps make an important contribution to health and safety on process plants.
TopGear MAG provides environmental, human, legal and economical protection -
|
|
Maag Pump Systems Textron builds its gear pumps to a modular design that adapts easily to customers’ requirements and industrial standards.
Housings are available in iron, steel or stainless steel, with or without heating jackets. Bearings, shafts and gears offer a similarly wide choice of materials and configurations.
Five classes of axial clearance and eight classes of radial clearance, coupled with Maag’s expertise in simulation, allow individual pumps to be specified for the highest possible efficiency. A wide choice of seals ensures safety in demanding applications.
|
|
The APV DW Rotary Lobe Pump
The most versatile rotary pump on the market
The APV DW range reflects latest technology in the development of rotary positive displacement pumps. No equivalent pump on the market offers such a wide range of features incorporated in a single pump.
Ultra Hygienic
* Meets the strict European hygienic standards (EHEDG)
* 3A Certified
* Designed for both CIP (Cleaning in place) and SIP (Sterilise in place)
* FDA approved elastomers
* AISI 316L product contact parts
* Completely self drainable when vertically ported
Exceptional Performance
* High volumetric efficiency
* Very low noise and vibration levels
* Low NPSH requirement
* Gentle product handling
* Patented rotor design option means pulse free operation
Easy Maintenance
* Minimum downtime with easy access front loaded mechanical seals.
Extensive Range
* Over 30 models, with capacities of 0 to 30 bar and 3 to 1016 litres/100 revs
* Wide choice of shaft seal type and materials
Flexible Design
* Available with a wide choice of additional options such as Thermal Jackets, Rectangular Inlets, Integral Pressure Relief Valve, Non-galling alloy rotors and much more
The DW pump with its flexible design and many variants is the proven solution for hygienic applications in industries such as Dairy, Brewery, Food, Beverage, Pharmaceutical, Personal Care, Chemical and many more.
|
|
|
Designed for "on-line" continuous shearing and mixing action. A choice of modularly interchangeable stators and rotors make it versatile for processing a wide variety of products. Variable speed drives may also be used to further adjust the shear and mixing affect. Texturizes to give a smooth body and texture to such products as ricotta cheese and food pastes. Emulsifies to make stable emulsions of products with both oil and water base ingredients; blends to provide continuous, on-line blending without air incorporation or lumps of dry product; reconstitutes to assist reconstitution of powdered products such as milk powders; suspends/disperses to give stable solids in liquid suspension; polishes to improve the appearance of products by providing a smoother and more uniform surface texture.
|
|
| ... products without technical information |
| |
... see all the products in the category
Drum pumps
|
|
The Johnson Pump range of magnetic drive centrifugal pumps has no seals and is therefore leak proof. This makes the pumps ideal for transporting aggressive, dangerous and valuable fluids. Because of more stringent environmental requirements and ever more advanced manufacturing process, there is increase in interest in this type of pump.
|
|
TopGear MAG - Protecting your future
TopGear MAG is a range of leak-proof internal gear pumps for low and high viscous liquids which are corrosive, toxic, aggressive or expensive.
Total containment of the liquid inside the pump is achieved using a hermetically sealed can, which isolates the liquid from the surrounding environment. This eliminates the need for shaft seals and the associated wear and leakage that would normally be experienced. The Magnetic Drive pumps are therefore not only environmentally friendly – they also contribute to improved safety in chemical and process plant environments.
Complying amongst others with the “ATEX” (ATmospheres EXplosibles) directive, magnetic drive pumps make an important contribution to health and safety on process plants.
TopGear MAG provides environmental, human, legal and economical protection -
|
|
For more than 25 years Sterling SIHI have been supplying pumps with magentic couplings for demanding applications in the process industry.
It´s experience in the field of magnetic couplings enables Sterling SIHI to use hermetically sealed drivers for the complete programme of liquid pumps.
PERFORMANCE (for leak free magnetic couplings):-
• Power rarting from 2 to 115 kW
• Temperature range from -40 °C to +400 °C
• Manufactured to ISO 5199 and VDMA 24279
PROCESS PUMPS WITH MAGNETIC COUPLINGS
Performance data
• Capacitiy: max. 650 m3/h
• Delivery head: max. 150 m
• Temperature: max. 300 °C uncooled
SIDE CHANNEL PUMPS WITH MAGNETIC COUPLINGS Performance data
• Capacity: max. 35 m3/h
• Delivery head: max. 354 m
• Temperature: max. 180 °C uncooled
PUMPS FOR HOT LIQUIDS WITH MAGNETIC COUPLINGS
Performance data
• Capacity: max. 600 m3/h
• Delivery head: max. 90 m
• Temperature: max. 400 °C uncooled
SPECIAL DESIGNS WITH MAGNETIC COUPLINGS
Sterling SIHI has 25 years experience in the design of pumps with magnetic couplings for special applications.
|
|
Johnson Pump has a long and broad experience of the design and manufacture of flexible impeller pumps. Our pumps have always stood for innovation and quality with strong emphasis on the flexible impeller itself – the main reason for the successful growth of Johnson Pump from the start some 30 years ago. Typical is the latest development – the first flexible impeller in the world produced, tested and certified according to the FDA (US Food and Drug Administration) milk compound formulation. The formulation comprises all types of foodstuffs.
|
|
|
Kinney Rotary Vane vacuum pumps provide an economical vacuum source for those applications where the process is relatively clean or filtered. Gas ballast valves for vapor handling applications are included as standard equipment.
|
|
The G2000 is a fixed flow, heavy duty, transfer pump. It is available in a variety of materials to suit various fluid types.
Capacity up to 500 M3/hr 2200 USGPM
Pressure up to 40 Bar 580 Psi
Viscosity up to 1,000,000 cSt 4,630,000 ssu
Temperature -40 to +300 C 570° F
|
|
Magmo pumps are designed principally to handle high viscosity abrasive sugar products, such as Molasses, Massecuite and Magma. The ellipse and scraper principle it uses was originally devised by the sugar industry itself to overcome the problems associated with pumping these difficult liquids.
The current design includes the best features from previous pumps and successfully deals with the problems common to pumping liquids such as massecuite.
|
|
The P2000 rotary pump is specifically designed for space constrained installations, or where a simpler belt-driven design is preferred. The P2000 rotary pump is available in two different designs :
Inboard roller bearing configuration with single mechanical sealing for duties involving lubricating liquids, such as Fuel Oils, Vegetable Oils, Lube Oils, and Additives.
Inboard plain bearing configuration with gland packing for duties involving non-lubricating liquids, such as Molasses, Resins, and Polymers.
|
|
|
The U2000 rotary pump is specifically designed for systems or processes where infinitely variable flow from 0-100% of the rated pumps capacity is required. The U2000 achieves this with a variety of Control Types,without the need for speed variation devices, bypass lines/loops or control valves. Our patented Constant Pressure Control (CPC) pump will operate against a closed valve.
|
|
Air Operated Double Diaphragm, AODD, from Johnson Pump. AODD pumps are used or have a potential in all types of industries such as:
• Petrochemicals
Tank cleaning, oil sludge, petroleum, benzine
• Chemicals
Acids, alkalis, suspensions, latex, solvents, electroplating baths
• Paint and Ink
• Resins and Adhesives
• Pulp & Paper
Printing inks, dispersions, pulp and paper slurries
• Pharmaceutical
Syrups, alcohol, glycerine, ointment, tablets pastes, oils
|
|
Advantages
Flexible
Optimal capacity adaptation to widely varying production processes
Variable stroke for each pump allows independent adjustment of each component
Variable speed drive allows flow rate variations while maintaining constant proportions
Economical
Automation allows higher production efficiency to be achieved
Adaptable
Existing installations can be altered or expanded with extra pumps or automatic control
|
|
|
These pumps with mechanically actuated dual diaphragms bring the advantages and security of the diaphragm design to applications with operating pressure up to 20 bar and flow rates up to 3.000 l/h at an economical price.
|
|
NOVAPLEX pumps are powerful diaphragm process pumps for a variety of applications. They are best suited for critical high pressure installations. Additionally, they can be used when the capability of classical metering pumps is exceeded.
|
|
|
CAT PUMPS specializes in portable FOAM FIREFIGHTING SYSTEMS for fast knockdown of brush and grass wildfires. Our FOAM FIREFIGHTING SYSTEMS feature the twin foam gun delivering a precise metered foam and high pressure spray to quickly control fires. Ultra compact units from 4-18 HP are designed for easy mount onto ATV's, pickup trucks and utility vehicles.
|
|
The Lubeplus GX is ideally suited to mechanical applications and plant used in the food processing, packaging and printing industries. Can accommodate systems with up to 200 lubrication points.
Lubeplus GX is designed to operate with a positive displacement unit (PDU) or with metering flow unit systems. The lubricator is available with a wide combination of condition monitoring features and a choice of 'with' or 'without' microprocessor control.
Gear Pump operation
Max. operating pressure 25 bar
Can use Oil or fluid grease
Available in 3 or 6 litre reservoirs.
Supply voltages 110v or 240
|
|
| ... products without technical information |
| |
|
