|
|
Hypro roller pumps are the number one all-around choice by farmers throughout the world. The rollers (from 4 to 8, depending on the model) revolve inside the pump housing to force the spray solution through the outlet to the nozzle. Roller pumps have a low initial cost and are extremely versatile. They operate efficiently at PTO speeds of 540 and 1000 rpm and have a wide pressure range of up to 300 psi and flow rates of 2 to 74 gpm. Roller pumps are self priming and easily adapt to PTO or gas engine drives. Specific seal, roller and casting materials can be selected for compatibility with certain herbicides, pesticides, fungicides and fertilizers.
|
|
Die cutter is designated for cutting out different patterns from hard foils, cardboard and paper. It can also be used for cutting out die stampings, from foils obtained in the vacuum forming process, by means of band punching dies placed on the plywood. It enables the so-called cardboard bending (making incisions) and perforation used in the production of foil and cardboard packing.
Two types of die cutter shafts are used: either two steel shafts or an upper shaft covered with a special material.
Using the first type of shafts, the material that is to be cut out and a separator made of a special plastic is placed on the punching die, which is a very impractical solution for large sizes of cut-out elements.
Using the second type of shafts punching die with a cut-out material is placed directly between die cutter shafts. This method increases the output of the machine. Die cutter shafts are driven by transmission belt, which enables noiseless and steady work.
We manufacture 6 models with different size of shafts:
WWP06KNA-600mm
WWP08KNA-800mm
WWP12KNA-1200mm
WWP15KNA-1500mm
WWP18KNA-1800mm
WWP25KNA-2500mm
-----------------------------------------------
zgrzewarki, wykrawarki, formierki
hf welders, rf welders, roller die cutters
Stretch ceiling machines, Zemat TG
-----------------------------------------------
|
|
Kaller Roller Cams are used for piercing, trimming, flanging and restriking.
The Roller Cam can be mounted in both vertical and horizontal planes and contain an internal gas spring for slide return.
The KALLER Roller Cam is developed to meet the markets demand for a standard Cam unit. The Roller Cam unit is the ideal solution for a small compact and cost effective unit. The Roller Cam is available for a max. piercing force of 30 kN, stroke 50 and 80 mm and for a max. piercing force of 50 kN, stroke 50, 80 and 100 mm. All models are equipped with an oilless slide bearing and, for the return action a gas spring is emloyed, with a an initial force of 200 daN.
The contact force between the driver and the cam unit is taken care of by a heavy duty roller bearing. The driver itself is to be manufactured by the user to give the required movement scheme and the contact surface on the driver should be hardened in order to maximize the lifetime of the Roller Cam. The angle between the driver direction of motion for the Roller Cam is to be 50°.
The Roller Cam can be fixed to the tool with a key and/or two cylindrical pins. When in the right position, the Roller Cam must be bolted to the tool with 4 M8 cap screws. The screws can be accessed from the side and from the top.
|
|
OR-type External Pneumatic Roller Vibrators are characterized by the reduction or even the elimination of friction through high frequencies and high centrifugal forces. At the same time, OR Vibrators are completely insensitive to resonance.
In OR Roller Vibrators vibration is generated by a rotor which describes an eccentric movement inside a steel race. OR Roller Vibrators generate very high frequencies and centrifugal forces with low consumption as compared to the force given. For activation a 2/2-way-valve and filtered compressed air are required. OR Roller Vibrators are used on bins and hoppers to avoid bridging or rat holing, as flow aids, as well as for screening, compacting, sorting, dissolving and cleaning applications.
- Available in eight different sizes
- Maximum operating temperature: 390° F
- Oil-free operation possible
- Great acceleration
- High centrifugal force
- Low noise level
- Low air consumption
- Maintenance-free
- Standard ATEX ExII3D certified
|
|
|
Laboratory roll mills are machines for testing the quality and processing characteristics of polymer material by means of discontinuous plastification, mixing or kneading. In both, plastics and rubber processing as well as processing of ceramics or special materials, roll mills by Dr. Collin are setting new standards in terms of precision and reliability.
|
|
|
Roller screw jack provide higher performance compared to ball screw jacks. Ideally suited to applications where a high dynamic load, high accuracy, high speed and a long life are required.
|
|
|
The Roller Chain Coupling is a safe, compact and powerful flexible coupling, able to handle loads from 0.1 - 11,000 kW. The sprocket teeth are specially shaped and hardened, and torque is evenly apportioned.
|
|
Indirectly actuated valve series with manually and mechanically actuated valves.
- Flow rate: 120 l/min
3/2-way valve
- Normally closed or normally open
4/2-way valve
- Minimal actuating force with pilot control
- Can also be used as 2/2-way valve by plugging the exhaust.
- 4 actuator types: stem, roller lever, idle return roller lever, whisker
Normally closed or normally open by turning the housing top:
VS, RS, LS
Normally closed, actuator attachment at left (number 1 on attachment above number 1 on housing)
VOS, ROS, LOS
Normally open, actuator attachment at right above number 2
This whisker valve with extremely low actuating forces is particularly well suited for units where dissimilar parts or actuating elements without precision positioning need to be sensed, or where the actuating levels are different. The whisker can be approached from any direction perpendicular to the whisker axis, or can be passed.
- Mounting bracket HV-1/8
Scope of delivery: 1 mounting bracket, 2 M5x25 socket head screws per DIN 912, 2 hex nuts and spring washers
Can be repaired with wearing parts kit
|
|
elero controls offer you a lot of advantages:
More comfort - your sun protection systems are operated easily by the press of a button.
More safety - roller shutters which are controlled by timers protect against thiefs and burglars.
Easy operation - fully automatic control by radio or press of a button.
Low energy consumption - prevent the undesirable drop in room temperature through automated roller shutters.
Low installation effort - easy installation of the control units without dirt and noise.
|
|
These low profile, 3-Point Load Moving Systems are perfect for moving over finished floors. They are currently available in load moving capacities of 6, 12, and 18 tons with additional load capacities coming soon.
Choose from Nylon, Polyurethane, or Steel rolls to suit your moving requirements.
Tri-Glide Three-point heavy load moving systems for machinery, equipment and other loads up to 18 Tons
|
|
for heavy loads up to 200 tons!
GKS-transport trolleys for professional application - worldwide approved and very robust.
- Premium features like stable and distortion free design, closed cassettes und rollers with high durableness.
- Rotating trolleys are all-purpose and the heavy load can also be rotated 360° about the own axis. The installation of special bearings means that these trolleys are rendered particularly easy to move and rotate.
- Customised solutions and nickel plated versions on request.
|
|
Available with JUWAthan-coated aluminum castors "Giant" for any flooring
Advantages in detail
- Pivot mounted cassettes assure even wheel loadings also under bad floor conditions. No need for complex and expensive trolleys with hydraulic compensation system
- All transport trolleys are ready for use: steerable transport trolley includes ball bearing turntable and the handlebar shown on picture, the adjustable transport trolley consist of two transport units and connecting rod
|
|
B30.201
Nesting Flat Carrier with 4 castors
Dimensions: H. 1000 x L 510 x W mm.960
CASTORS Ø125
Nesting distance 350 mm
|
|
Special trolley with sliding brackets and ampoule rack on rollers for pushing frame into sterilising room.
Safety mechanism for securing trolley...
|
|
|
This cart with dimensions that adapt to small store surfaces is perfect for your bakery. With a payload capacity of 5200 Cu. In., it will seduce the customers who want to purchase few articles. Light (29.5 lbs / 13.38 kg), this small cart will fit just about anywhere. Furthermore, its short nesting (6.5'' / 19.05 cm) allows a large number of carts to be stored using little floor space. With a Tech-SealTM finish, this cart withstands extreme weather conditions (guaranteed 3 years against corrosion) and therefore, is a great alternative to conventional hand baskets. Do not hesitate to contact your closest distributor today!
|
|
Sturdy aluminium trolley for versatile use.
Sturdy, generously dimensioned edge and base profile sections, high-strength positive locking ensures permanent bonding to jacket and base metal.
Welded version available.
Running gear: 2 swivel and 2 fixed castors - corner-mounted, 125 mm dia., 40 mm wide, easy-running, rubber wheels, "non-marking", roller bearings, thread guards.
|
|
|
|
see the results for the following category
