|
|
This line of slew drive reduction gears, from 500 to 1700 daNm, is ideal for applications on crane trucks, excavators, harbour cranes, and so on.
The main features are the output support in steel and a sturdy pinion integral with the shaft, suitable for any type of thrust bearing.
|
|
Whereas certain manufacturers would like that these are the materials which adapt to their drives of pump, the range Funk, it, can be flexible.
We indeed chose the modularity in the manufacture of our drives of pump, which enables us to propose more than 5000 different configurations: power, couple, speed ratios, adapters hydraulic, Made types of installation... your choice. Conceived to remain discrete, our drives of pump are divided into five series, of 135 with 950 ch (101 to 708 kw), and are appeared as a unit to independent or direct assembly on the engine, or to clutch.
Advantages of the modular concept.
The implementation of state-of-the-art technologies, allied with our modular techniques of manufacture, enables us to propose drives of pump at really competitive prices. Moreover, thanks to the broad choice suggested, you will have never to pay for a pump whose capacity is higher than your needs.
|
|
PIV Drives has developed this range of rack and pinion drives for closing the mould of injection molding machines. This type of drive features quiet running spur gear reduction and presents a compact construction with an integrated motor. The POSIRACK design has a double-toothed rack output. Case hardened and ground gear wheels are the base for this high performance drive, with the industry’s best accelerating and decelerating torque and an extremely quiet package.
Technical Data:
Rack clamping force: up to 450 kN
Rack speed: > 2,000 mm/s
|
|
|
Gearboxes complete with reinforced output supports, integral pinion, static negative disc brake and input coupling for hydraulic motors; nominal output torques range from 4.100 Nm to 60.000 Nm.
|
|
- Torque Range: 23,000 to 4.9 Million in-lbs (552,000 Nm)
- Ratios: 6.3:1 to 500:1 standard
- Unlimited ratios available with combination Cyclo and Paramax®
- Housing: Cast Iron (standard), Ductile & Fabricated Steel (optional)
- Universal Housing: Horizontal, Vertical and Upright Mounting
- Direct Motor Mount: Standard (for Right Angle Models), No Coupling Alignment, Compact Design
- Low Speed Shaft: Solid, Hollow Bore with Shrink Disc or Keyed
- Auxiliary Cooling: Fan, Cooling Coil, Cooling Systems
Product Description:
Paramax® parallel shaft and right angle drives are built on almost six decades of Sumitomo excellence in power transmission engineering. Some of the largest, and most durable power transmission systems operating in the world were designed and manufactured by Sumitomo. The Paramax® product line includes the Standardized Series 9000, and the Special Application Series: SFC Cooling Tower and Condenser Drives, and SEC Extruder Drives.
Applications:
- Conveyors and Material Handling
- Cooling Towers and Condensers
- Extruders
- Agitators and Mixers
- Cement Kilns
- Cranes
- Wastewater Treatment
- Mining
- Forestry, Pulp and Paper
- Sugar Processing |
|
The new HFUC Series component sets are a result of the continuous development of Harmonic Drive precision reduction gearing. In comparison with standard gears, the new HFUC series features a shortened Flexspline, which results in an important reduction of the axial length. The high performance IH tooth profile provides significantly increased torque capacity compared to gears incorporating the traditional involute gear tooth profile.
Advantages:
- High torque capacity
- Excellent positioning accuracy and repeatability
- Compact design
- High single stage ratios
- High torsional stiffness
- Zero backlash
- High efficiency
- Easy installation and assembly |
|
Dedicated to racks & pinions drive applications, the KRP+ design is based either on the use of one single unit or on the association of two top quality planetary reducers, mounted in parallel on the machine main frame.
When used as a SingleDRIVE, the KRP+ gives the benefit of an ultra high stiffness feed gearbox, dedicated to high performances rack & pinions drive systems.
When choosing the mechanical preload solution, the KRP+ become a DualDRIVE unit, which achieve the true backlash free feature by torsionally winding one pinion against the other through the rack.
Immediate benefits are to need only one motor, and to dramatically simplify the motor control.
When choosing the Electrical preload solution, the KRP+ is used as a TwinDRIVE unit, where the backlash is cancelled by the opposite torque balance between the two pinions, according with the two motors and drives remote control. |
|
Dedicated to racks & pinions drive applications, the DRP+ design is based on the association of two top quality planetary reducers, mounted in parallel on an extra high stiffness universal frame.
When choosing the mechanical preload solution, the DRP+ become a DualDRIVE unit, which achieve the true backlash free feature by torsionally winding one pinion against the other through the rack.
Immediate benefits are to need only one motor, and to dramatically simplify the motor control.
When choosing the Electrical preload solution, the DRP+ is used as a TwinDRIVE unit, where the backlash is cancelled by the opposite torque balance between the two pinions, according with the two motors and drives remote control.
|
|
powerful diversity
Modul 2 and 3 available
2 different rack qualities
PLV and PLE combinations possible |
|
Nexen offers an advanced new technology that revolutionizes linear motion. The Roller Pinion System (RPS) provides zero backlash, very high positional accuracy, unlimited length, very high speeds, 99% efficiency, high rigidity, low noise, low maintenance, corrosion resistance, and long life. This opens up
new design possibilities and provides the capability to achieve much higher levels of performance in machine designs.
The RPS's unique design eliminates many of the limitations of current linear drive systems like:
Ball Screws: Limited by critical speed, maximum speed, cumulative error, vibration, thermal expansion, supplemental cooling, noise, low efficiency, maintenance, and life.
Traditional Rack and Pinion: Limited by low accuracy and speed, backlash, tooth fatigue, noise, high cost of dual and split pinion systems, high maintenance, and short life.
Belt Drives: Limited by low accuracy, backlash, low load capacity, short lengths, belt stretch, and low rigidity.
Linear Motors: Limited by low load capacity, high cost, strong magnetic fields, and liquid cooling.
|
|
FUTEK's Rotary Torque Sensor - Square Drive with Encoder offers a unique solution for torque auditing applications. The TRD305 Rotary Torque Sensor - Square Drive
with Encoder is available in a wide capacity range and utilizes strain gauge technology.
For those who are a looking for a complete system solution, FUTEK can provide both signal conditioned displays or our VCal Portable System. FUTEK's VCal Portable System brings an easy-to-use system verification directly to the customer making it ideal for on-site verification and calibration of your products. FUTEK TRD Series is also available with TEDS / IEEE1451.4 option. |
|
| ... products without technical information |
| |
Drive-in racking is also called corridor-type racking, composite structure, specialized high-intensity drive-in brackets, high-strength drive-in beam, frames are connected to top beams by bolts&nuts. The depth of the single side drive-in racking which is against the wall should not be more than 6 pallet locations, and that of double side drive-in should be less than 12 pallet positions so as to ensure the loading efficiency of forklifts and stability of racking. It's best to make drive-in lower than H11000mm because of its not so good stability which is the weakest compared with other racking system. The drive-in racking should be equipped with back, top cross beams, etc. to stabilize the racks. This type of racking is densely arrayed, making full use of storage space; both "first in first out" and "first in late out" are available, suitable for storing few types of goods with large quantity. Widely used in milk, drink industry, and also be welcome by cold storage.
MOQ: one 20ft container
Each order requests a minimum order value of USD12,500. Otherwise extra handling fee of USD200 per order will be charged. |
|
Drive-in racking is ideal for homogeneous products with low levels of turnover and a high number of pallets per article type. This system offers the highest use of available space in terms of both area and height.
Advantages:
- Maximum use of available space (85%).
- Elimination of aisles between the racking.
- Rigorous entrance and exit control.
- Drive-in racking can generally accommodate as many article types as there are loading aisles.
Two management systems are available: the drive-in system, with only one access aisle, and the drive-through system, with access to the load from both sides of the rack.
The system is frequently used in cold stores (refrigeration and freezing) which require maximum use of space for the storage of products in a controlled temperature.
Drive-in racking can also be used in construction of clad-rack buildings whose most striking feature is that they do not require the existence of a building prior to construction.
|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
Direct driven piston compressors
This series of direct driven piston compressors is very compact in construction. These Creemers products are, of course, eminently suited for professional use.
The compressors are available in 1-, 2 and 3 cylinder versions from 0.5 to 1.5 kW, on the basis of 230 V, 50 Hz, single phase. We also have a 12 and 24 Volt compressor in our range, Portair 12V and 24V, which are ideal for carbattery operation. All of these products come, of course, with a complete Creemers guarantee.
|
|
This series of direct driven piston compressors is very compact in construction. These Creemers products are, of course, eminently suited for professional use.
The compressors are available in 1-, 2 and 3 cylinder versions from 0.5 to 1.5 kW, on the basis of 230 V, 50 Hz, single phase. We also have a 12 and 24 Volt compressor in our range, Portair 12V and 24V, which are ideal for carbattery operation. All of these products come, of course, with a complete Creemers guarantee.
|
|
Materials
Wetted parts AISI 316 Internal cartridge phenolic graphite as standard Internal cartridge Special Carbon w/Sic Brgs. Bracket aluminium / WCB Special alloy: Hastelloy, Incoloy, Titanium
Technical Data : Flow Rates up to a 3m3/h Total delivery heads up to 13bar Temperature Ratings up to 200°C Pressure rating up to PN 25
Construction
Sliding vane pump for general applications Permanent Magnet Drive system Separation of liquid chamber/atmosphere by means of an isolation shell Synchronous drive transmitted by inner magnet and outer magnet system TOP-TOP connections with integrated by-pass
Applications
Pumping acids, hydrocarbon, diathermic oils, liquid gases, dangerous fluids, explosive, toxic.
Further material available if request
Various materials from the standard special Constructions
|
|
| ... products without technical information |
| |
The compact geared motor achieves a high performance with a small design. A high-resolution incremental encoder, attached directly to the gear's hollow shaft, makes precise positioning possible. Special characteristics are a simple mounting and a high-performance motor.
|
|
Plug and play: immediately useable
Ratio-Drive® from Hänchen is a self-contained, ready-to-use system solution for practically any application. This high-performance regulated linear drive is the sum of „standardised“ components in combination with the attendant mechatronic services. It is tailored exactly to your needs. As a user the only thing that you have to provide is the hydraulic and electrical supplies.
Independently strong – unbeatable in a team
Without doubt the cylinder is the heart of every Ratio-Drive® system solution. Every user can call on its application as a single cylinder or as several cylinders within a self-contained circuit. In order to be capable of presenting an individual solution in the form of a system, the cylinder requires reliable ”system partners”, as only the practical combination of cylinder, components and mechatronic services can provide an individual and simultaneously effective solution. This includes the mechatronics (every Hänchen cylinder with integrated linear positioning system is a part of a Ratio-Drive® system solution), electronics, the corresponding valves, the control unit and power supply. |
|
| ... products without technical information |
| |
Dynamic Simulation of Valvetrain
The cam lobe profiles are pre-specified to meet the performance and durability development targets. The dynamic behaviour of the valve train is verified using sophisticated analysis methods and tools available in the AVL TYCON software package. The valve train is optimised for low weight, friction and wear, yet meeting the durability target and considering the production capability and material properties.
The entire valve train including the camshaft drive (chain,belt or gears) is optimised to avoid excessive vibrations and dynamic forces in the system, which lead to premature failure and excessive noise. The analysis is validated by advanced measurement techniques capturing the dynamics of valve train components supports.
|
|
Description
The range of our products extends from a single blanking and forming presses to a fully automated line with material feeding and die change by moving bolster up to complete stamping plant planning and design for optimized and uninterrupted material flow. These lines are most suitable for the production of smaller to medium-sized lot sizes and achieve very high production rates. Available drive systems include eccentric shafts in both longitudinal and transverse design as well as multi-part link drives that can be designed to suit drawing or blanking operations.
|
|
... see all the products in the category
Presses
|
|
