|
|
This series of gear reducers with attached or integrated thrust industrial bearing can be supplied in a helical or bevel winding gear arrangement. Quiet operation and strong design are key features. Horizontal or vertical mounting position, splash lubrication and cooling coil or injection lubrication are possible options. The modular design of the POSIREX is based on the POSIRED 2 range, plus a selection of available thrust-bearing parts.
Technical Data:
Torque (T2 nominal): 3,000 up to 800,000 Nm
Transmission Ratio: 4 up to 160 iN
Axial force: F = 50 up to 2,000 kN
|
|
Double shaft extruder suppliers professional gears have been built by PIV Drives since 1984 for a variety of applications in the plastics and food industries. This product is in operation around the world to the complete satisfaction of our customer base. The gearing is case hardened and ground with a profile correction for optimal load-bearing performance and noise reduction. An extremely quiet gear-train is achieved through a high contact ratio. The axial forces which occur during the extrusion process are safely absorbed through a system of tandem bearings manufacturer and self-aligning roller thrust bearings.
Technical Data:
Screw centre distance: a = 15 up to 200 mm
Input speed: up to 1,800 rpm
Torque factor: df = 35 Nm/cm3
Power: up to 5,500 kW
|
|
Our product line consists of proven technology including PneumaticScaleAngelus' Pneumacapper and Consolidated Capem Professional cappers. We also offer a wide variety of sorters to accommodate any size and shape.
-Proven technology from PneumaticScaleAngelus including Consolidated's Capem Cappers
-Reliable, minimal-maintenance, highly versatile capping solutions from the industry leader in packaging automation
-Widest range of cap and containers with maximum speeds of 750 CPM
-Superior customer service and technical support |
|
| Single-head capping line with magnetic professional clutch head and Pick & Place device suitable to apply special plastic pre-threaded screw caps on special glass, PET and PVC bottles. |
|
Extrusion splicer is carried out in wide variety of areas and is becoming evermore demanding. Leister offers the right tool for all plastics applications in process equipment manufacture and civil engineering. The specialist obtains everything with us from a single source: Devices from 0.3 to 6.0 kilo per hour. Convince yourself.
• Ideal for tight spaces
• 360° rotatable welding professional shoe
• Easiest possible handling |
|
New hand-manufacturer of extruders are equipped with brushless self-blowers lasting more than 40,000 hrs work, self-diagnose system, working-hour industrial counter, double temperature controller with 2 C accuracy.
The extruders are ready to work within 3.5 min and they cool down automatically within only 2 min., ensuring much longer life to the heating elements to further reduce the equipment maintenance. |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
| ... products without technical information |
| |
FusionTM II screw. Delivers enhanced mixing while retaining benefits of the original FusionTM screw, namely higher output and lower melt temperature. Applications: injection moulding machine, extrusion and blow molding.
MultiMeltTM injection molding screw. "Universal" screw works with almost any polymer except rigid PVC. Combines productivity benefits of barrier flights for melting with an integrated StrataBlend® II professional mixer for improved color and additive dispersion and temperature homogeneity.
EasyMeltTM injection molding screw. Combines the simplicity and economy of a conventional three-zone screw with the productivity and quality benefits of optimum material feeding, melting and metering.
StrataMeltTM injection molding screw. Resin-optimized single-stage geometry like the EasyMeltTM but with an integrated StrataBlend® II mixer for improved color and additive dispersion and temperature homogeneity.
FusionTM Screw. New-generation barrier screw boosts productivity, lowers melt temperature and improves color/additive dispersion in injection molding, extrusion and blow molding.
EfficientTM Extrusion Screw. Barrier screw for extrusion proven for more than 30 years in the field.
|
|
The AHP screw-in professional cylinder excel on account of their tiny size. When integrated in a tool, it works without a large amount of space being required. With all the quality characteristics of a Merkle cylinder.
- Resinated piston rod, ground and chromed
- State-of-the-art professional seal |
|
New "direct drive" screw press with rotative linear motor
The new screw press that Ficep is proposing in addition to the traditional screw industrial presses with disks control, is characterized by technical innovations which place this machine ahead of the market. |
|
... see all the products in the category
Presses
|
WMB Spirals
Spiral springs are excellent for protecting spindles manufacturers and shafts from chips, dust and liquids, high temperatures and chemical influences. WMB spirals are distinguished by their reliability and performance as well as low maintenance. They have a good sealing function and therefore provide optimum conditions for safe operation of shafts, columns and spindles.
|
|
The helical screw flowmeter is a high precision meter giving excellent reliability. It is mainly used for viscous fluids but will also perform well on low viscosity fluids. The basic range of meters are in aluminium or grey cast iron and stainless steel models are available. Flow rates range from 0.1 l/min to 7,500 l/min.
Suitable for wide ranges of viscosity these meters provide high accuracey measurement (+/-0.1%) for fuel and oil flows particularly for automotive and aviation test rig applications. |
|
The Vrieco-Nauta conical professional mixer is a convective mixer with a high mixing efficiency that treats your product gently and guarantees the highest level of mixing accuracy without any product distortion.
The Vrieco-Nauta conical mixer was developed more than sixty years ago. Since then, many product innovations have followed. The reliability of the design and performance that is known the world over is exhibited in countless installations in a wide variety of applications.
|
|
Clinch studs are inserted through pre-pierced sheets into clinch dies. Initially the hole in the sheet is widened by the calibrating collar. After that, the clinch stud is precentred by means of the calibrating collar. Finally, the sheet material is forced into the annular groove and the Torx locking feature is pressed in. A very high loadcarrying capacity is achieved by means of the patented underhead geometry.
The reduction of production stages and of energy consumption results in considerable cost savings. An additional advantage is the possibility of processing several clinch studs in a single stage. |
|
Features and Benefits:
Bolttech is known for solving the toughest bolting problems found in the industrial world today. These basic practices go into every design and manufacturing detail of our stud tensioning line of tools. We design our tensioners with quality, simplicity and versatility of the specific application and user in mind. Bolttech's Delta Series bolt suppliers tensioners maximize efficiency and minimize size for specific single stud size applications.
- Patented high pressure/low friction professional seals are designed to outlast the competition and provide accuracy within .5% with a calibrated pumping unit.
- Environmentally friendly, using water-filled tensioning systems.
- The direct axial load is applied to the bolt and inaccuracies created through friction are alleviated. |
|
In its standard range of hydraulic tensioners, SKF Equipements offers no less than 6 different types of tensioners with characteristics which are both different and complementary.
The product range includes multi- purpose, powerful, thin, compact and other types of tensioners, covering a wide range of bolt manufacturer dimensions from M8 to M160 (5/16” to 6”), and able to apply pre-tightening loads ranging from 50 kN to 8500 kN.
|
|
HYDRAULIC SUPPLIERS OF BOLT TENSIONING DEVICE
Output 155Kn to 4476Kn, Stroke up to 15mm, Suitable for Bolt Sizes M18 to M115 in various models
|
|
The RotaBolt® range provides you with either finger-tip, visual or remote measurement of tension throughout the life of the bolted joint. They surpass traditional tightening methods such as:
- Hydraulic Tensioners
- Flogging
- Torque Systems
which have severe control limitations and can result in unpredictable bolt tension and joint failure.
RotaBolts are setting new safety standards in a wide variety of sectors where joints are subject to fatigue, vibration, pressure containment and structural slippage.
|
|
| Over the years, Hydratight has developed many solutions for non-standard tensioner applications. A number are based around our existing reliable products, but we also have the ability through our experienced design engineering team to produce bespoke products to solve a wide range of tensioner based bolting applications. |
|
| ... products without technical information |
| |
Features:
- Portable, handheld units
- Battery operated
- High resolution display
- Temperature compensation
- Interchangeable transducers
- Windows software
- Built-in probe zero block allows easy exchange of transducers
- Regression analysis for custom material calibration
- Windows software to download measurements create reports, and upload test parameters
- Direct-to-printer reports |
|
| ... products without technical information |
| |
|
