|
|
These wheels cover the range from 200 to 1700 daNm.
They are ideal for heayy self-propelled vehicles (fork lifts, airport machines, etc.) requiring reliable hydraulic disk parking brakes of the negative type and manual mechanical emergency disengagement. |
|
| These wheels cover the range from 280 to 1400 daNm. They are ideal for the sector of mobile and tyred vehicles in general (road vehicles, building machines, agricultural tractors) requiring mechanical shoe brakes and manual mechanical emergency disengagement. |
|
These wheels cover the range from 100 to 11000 daNm. They are ideal for translation control in tracked vehicles (excavators, drilling machines, etc.) requiring reliable hydraulic disk parking brakes of the negative type.
They also offer compact coupling solutions on axial piston motors and semi-integrated orbital motors |
|
The modern and innovative design, the compact construction and the excellent performance characteristics of the PGR/PGW series of gear units make these especially suitable for driving rubber tired or tracked self-propelled vehicles.
Product features include:
- Single or two-stage reduction model.
- Transmissible torques up to 16.0 kNm..
- Integrated parking brake.
- Broad range of gear reduction ratios.
- Manual release system for vehicle quick towing.
- Integrated orbital or axial piston motors.
- Preset for semi-integrated commercial engines.
- Various mounting dimensions. |
|
| The new range of Track drives developped by Dinamic Oil is called EH and has a range starting form 50.000 Nm up to 330.000 Nm |
|
This series of gear reducers with attached or integrated thrust bearing can be supplied in a helical or bevel helical gear arrangement. Quiet operation and strong design are key features. Horizontal or vertical mounting position, splash lubrication and cooling coil or injection lubrication are possible options. The modular design of the POSIREX is based on the POSIRED 2 range, plus a selection of available thrust-bearing parts.
Technical Data:
Torque (T2 nominal): 3,000 up to 800,000 Nm
Transmission Ratio: 4 up to 160 iN
Axial force: F = 50 up to 2,000 kN
|
|
Double shaft extruder gears have been built by PIV Drives since 1984 for a variety of applications in the plastics and food industries. This product is in operation around the world to the complete satisfaction of our customer base. The gearing is case hardened and ground with a profile correction for optimal load-bearing performance and noise reduction. An extremely quiet gear-train is achieved through a high contact ratio. The axial forces which occur during the extrusion process are safely absorbed through a system of tandem bearings and self-aligning roller thrust bearings.
Technical Data:
Screw centre distance: a = 15 up to 200 mm
Input speed: up to 1,800 rpm
Torque factor: df = 35 Nm/cm3
Power: up to 5,500 kW
|
|
Gearboxes, main and auxiliary drives for:
- Rubber and plastic mixers and extruders
- Sugar millsi
- Paper mills
- Mills
- Cement factories and mines |
|
The new series of helical gear units has been studied and designed specifically for use on systems for the SINGLE-SCREW EXTRUSION of various materials, such plastic, rubber, etc.
Our range includes two-stage reduction units, PBE series, with a nominal reduction ratio ranging between 6.3 and 28, and three-stage reduction units, PCE series, with a nominal ratio ranging between 8 and 125.
By being able to have the same reduction ratios 8÷28 on both series either solution can be chosen for the same application, depending on the dimensions and version required.
For all sizes, the housings of the gear units are built in G25 grey cast iron, suitably dimensioned for heavy duty work. They are suitable for mounting both horizontally and vertically.
The output flange, housing the thrust bearing and used for mounting the extrusion screw, is integrated in the housing cast.
The thrust bearing fitted on the low-speed shaft is the 294__E type and dimensioned for heavy duty working conditions.
In the standard version, screw keying is done with a feather key but it may also be done with a grooved profile, according to the most common standards in force.
|
|
This line of slew drive reduction gears, from 500 to 1700 daNm, is ideal for applications on crane trucks, excavators, harbour cranes, and so on.
The main features are the output support in steel and a sturdy pinion integral with the shaft, suitable for any type of thrust bearing. |
|
Falk™ Ram® Mixer Drives
Ratios: 5.06:1 to 1,207:1
Power: to 4 100 kW (5,500 hp)
Torque: to 429,000 Nm (3,800,000 lb-in)
18 sizes in parallel shaft or right-angle shaft configurations
Solid and hollow shafts
Top, bottom, or side entry mixer mountings
Rugged, rigid housing that includes:
-No leak drywells
-Extended bearing life
-Large diameter shafting
|
|
Brevini's range of mixer drives are planetary gear units modified to meet the operating requirements of water conditioners and of mixers in chemical, ceramic and paper producing industries. The mixer drives combine the traditional advantages of Brevini's planetary technology - compactness and high efficiency - with the characteristics of strength and reliability.
The flexibility of the mixer drive design provides users with a number of construction options, including in-line and right-angle configurations, and the facility to directly mount a motor to the gearbox via a flange. Alternatively, a male input shaft configuration may be used with connection effected by a flexible coupling or pulley. |
|
PIV Drives has developed this range of rack and pinion drives for closing the mould of injection molding machines. This type of drive features quiet running spur gear reduction and presents a compact construction with an integrated motor. The POSIRACK design has a double-toothed rack output. Case hardened and ground gear wheels are the base for this high performance drive, with the industry’s best accelerating and decelerating torque and an extremely quiet package.
Technical Data:
Rack clamping force: up to 450 kN
Rack speed: > 2,000 mm/s
|
|
| Gearboxes complete with reinforced output supports, integral pinion, static negative disc brake and input coupling for hydraulic motors; nominal output torques range from 4.100 Nm to 60.000 Nm. |
|
Speed modulators with coaxial and bevel gear units.
Torque from 25 daNm to over 100 daNm.
Speed modulators with reversing gears.
|
|
New range of ultra-compact planetary and bevel helical gearboxes for industrial applications.
These new gear reducers, which are protected by a specific patent, feature a combination of planetary and helical/bevel helical gears that takes advantage of the strengths of each technology: compact size, reliability and easy maintenance.
This new series of lighter, more compact gear reducers surpass traditional solutions for planetary and bevel helical gear reducers and also ensure shorter production times and lower production costs.
The design of these ultra-compact gear units is based upon precise analyses using FEM (Finite Elements Method) techniques applied to 3D models, which means that performance, in terms of duration and silence, was optimized already in the virtual prototype phase.
Advanced engineering techniques, long experience and the use of high quality parts from Brevini Riduttori and PIV Drives led to the creation of a product that ensures high performance over time, a fact that has been confirmed by tests that simulate real operating conditions. |
|
| ... products without technical information |
| |
Diamond and CBN wheels in resin bonded adapted for grinding, sharpening, creep feed grinding of tools.
diamond and CBN resin bonded grinding wheel
PCD and CBN cutting tool
diamond high precision tool
Grinding wheel
flexible bonded abrasive
Polishing Diamond pad
CBN grinding wheel
Honing diamond and CBN tools
Diamond powder
Synthetic diamond powder
Natural diamond powder
diamond and CBN saw blade
diamond and CBN abrasive disc
diamond dressing tool
abrasive disc for boat industry
laboratory cut-off wheel
diamond disc
CBN vitrified grinding wheel
diamond and CBN vitrified bonded grinding wheel
diamond and CBN metal bonded grinding wheel
diamond grinding wheel for the optical industry
diamond and CBN gear grinding wheel |
|
The desired lead and profile modifications on the workpiece are reproduced on the diamond dressing master gear.
Extremely complicated gear geometries including topological profiles are realized on topological gear grinding machines.
TYROLIT diamond dressing master gears are using both positive and double reversed plating processes. |
|
| ... products without technical information |
| |
|
|
see the results for the following category
