|
|
Type A and Type B
The two drive types are controlled by a simple cable remote control with up/down keys. We recommend Type B for high loads. The engine and the control are built into the housing. The transformer (230 VAC, optionally 110 VAC) is attached on the outside of the housing. The cable remote control (2 m cable length) is installed below the table edge at the desired location, and can be pushed under the table top.
Typ C
On drive Type C different heights can be memorized and automatically selected. The memory board also has a digital height indicator. The infrared remote control is available as an alternative to the memory board. The power supply (230 VAC, optionally 110 VAC) is integrated into the control unit. The memory board (2.5 m cable length) is installed below the table edge at the desired location, and can be pushed under the table top.
|
|
Motor drive with through-going hexagon socket.
- integrated position measuring system
- simple upgrade from manual to motorized solution
- completely damped against vibration and noise by an elastic coupling as well as by several absorbers
|
|
MB series characteristics:
MB reducer consists of compressed drive devices, friction transmission devices and speed-regulating devices.
Wide speed-regulating range, stable running,
Speed-regulating range R=5, suitable for constant running at clockwise orcounterclockwise, speed can be varied at the starting or in running.High precision of speed-regulation, coaxial , compact design, light weight. Under permissible load, certain output speed is constant. Stable running, silent, long lifetime, less maintenance, easy operating, high efficiency.
Rotation direction,
Basic speed range: 200-1000rpm
Combination: 0.001-2000rpm(Subsection)
Torpue: 1.5-980kW
Power: 0.18-22kW
|
|
The Sumitomo Cyclo drive is unsurpassed by any other inline drive available in the market today. Cyclo's unique epicycliodal design has advantages superior to speed reducers using common involute tooth gears. Cyclo components operate in compression, not in shear. Unlike gear teeth with limited contact points, a Cyclo has two thirds of its reduction components in contact at all times. This design enables Cyclo speed reducers and gearmotors to withstand shock loads exceeding 500% of their ratings, and provide exceptional performance, reliability and long life in the most severe applications.
Features & Benefits:
- Highest overload capacity, exceeding 500%
- Exceptional life with a 24 month unlimited warranty
- High efficiency, even at high reduction ratios
- Unlike involute gearing, no thermal limits
- Available as inline speed reducer or gearmotor
- Ideal for severe, high shock applications
- Grease lubricated for no maintenance
|
|
Fine Cyclo Speed Reducers are designed for robotic and other very demanding applications. These reducers emphasize zero backlash, extremely small lost motion and very high torsional stiffness to insure the ultimate in positioning accuracy. Because Fine Cyclo is based on the Cyclo speed reduction principals and technology, it withstands high shock loads, and boasts high reduction ratios in a small package.
Features & Benefits:
- High Shock Load Capacity
- Compact Size and High Torsional Stiffness
- Small Hysteresis Loss
- High Efficiencies and Low Vibration
- Multiple Configurations for Application Flexibility
|
|
Uniblock design for foot and flange mounting. Gear case machined on all sides for universal application.
Revolutionary new gearing geometry here and in all the other models results in exceptional running smoothness. For special environmental conditions the gear unit can be fitted with two shaft seals.
|
|
|
The Sumitomo Cyclo drive is unsurpassed by any other inline drive available in the market today. Cyclo's unique epicycliodal design has advantages superior to speed reducers using common involute tooth gears. Cyclo components operate in compression, not in shear. Unlike gear teeth with limited contact points, a Cyclo has two thirds of its reduction components in contact at all times. This design enables Cyclo speed reducers and gearmotors to withstand shock loads exceeding 500% of their ratings, and provide exceptional performance, reliability and long life in the most severe applications.
|
|
|
The Series M gear motor range takes advantage of many years of accumulated design expertise, together with the use of high quality materials and components. The end result is a series of speed reducing and geared motors offering high load carrying capacity, high efficiency, quiet running and reliability.
|
|
The uniblock gear case machined on all sides, the particularly stable case and minimum outside dimensions enable diverse mounting options and applications.
As a result, these motors often form an integral part of our customers’ machine designs. High precision manufacturing and top gearing quality guarantee minimum backlash in Watt Drive gear units.
|
|
|
The Hyponic geared motor is based on 60 years of experience in the development and manufacture of gear and drive solutions. To date there are over a million Hyponic geared motors in service. The latest generation is characterized by a more compact design, a modular system, maintenance-free operation and universal installation positions. With the IP65 (wash down) option, the Hyponic is an ideal solution for beverage bottling plants and food manufacture. Hypoid gearing technology in case hardened steel, patented by Sumitomo, provides high efficiency and is far superior to the customary worm gears due to gear ratios from 5:1 to 1440:1. The Hyponic gear combines the cost advantages of the worm gear with the technical characteristics of a bevel gear.
|
|
The Sumitomo Hyponic gearmotor represents 60 years of excellence in the design and manufacture of premium gearing solutions. With over one million Hyponics currently in service, the newest model features a more compact, modular housing, maintenance-free grease lubrication, and high efficiencies. Options include C-Face configurations and gearmotors. With washdown duty as a standard option, Hyponic is the ideal choice for bottling, bakery, and food processing industries. Sumitomo's patented all-steel hypoidal gear technology is extremely high-performance and exceptionally more efficient than worm gearing across ratios from 10:1 to 240:1.
Features & Benefits:
- Patented Hyponic gear technology is up to 90% efficient across all ratios and requires no cooling fan
- Offset, all-steel hypoid design transmits torque more efficiently for more torque per unit in a smaller, more compact size
- Grease lubrication is trouble-free, with no oil to change or maintain
- Compact and lightweight design in an aluminum, corrosion resistant housing with optional washdown protection
- Optional plug-in shaft and bolt-on feet afford multiple mounting configurations
- Hollow bore makes installation and retrofit quick and easy
- Extremely quiet, smooth operation is ideal for commercial use
- Two-year warranty
- Optional popular bore sizes available from stock: 1 3/16", 1 7/16", 1 15/16", 2 3/16"
|
|
Due to the unique combination of newly developed worm wheel material with special lubricants, extreme precision and optimized shapes, this powerful motor achieves comparatively high levels of efficiency and torque. The case machined on all sides enables diverse mounting options.
Double-chamber shaft seals made of HNBR are used as standard, guaranteeing complete leak tightness.
|
|
With MOTOX we offer both a modular geared motor range and a comphrensive range of frequency inverters.
Torque range: up to 20,000 Nm
Power rating: up to 200 kW
|
|
With MOTOX we offer both a modular geared motor range and a comprehensive range of frequency inverters.
Torque range: up to 20,000 Nm
Power rating: up to 200 kW
|
|
With MOTOX we offer both a modular geared motor range and a comphrensive range of frequency inverters.
Torque range: up to 20,000 Nm
Power rating: up to 200 kW
|
|
|
The DC-motors can be combined with control electronics, gearboxes, brakes and encoders in a modular system to provide a flexible, adaptable, market-oriented solution.
|
|
The Dunkermotoren GR/G range (commutated DC motors) are notable for:
Longer life than commutated motors from other manufacturers
Low detent torques
High efficiency
High dynamic acceleration
Good regulation characteristics
High power density
Maintenance-free
Robust design
Low moment of inertia
Motor insulation class E
Winding insulation class F
Extremely high short time overload capacity of the motor
Surface protection
Minimum interference radiation, optional interference versions
Protection up to IP 65
High quality due to fully automated production lines
|
|
The RDxx is a complete positioning unit which integrates a DC gear-motor, a drive, an encoder and a controller. Profibus, CANopen and RS485 interface are available.
The Rotadrive is capable to move axis to target positions by means of ramps and with backlash compensation.
Thanks to its small dimensions (58x125x105 mm) RDxx can be mounted directly on spindle with Ø14mm and fixed by means of the collar and the anti-rotation pin.
Typical applications of this product is on tool-changers, gauges and packaging machinery.
|
|
|
The megatorque motor ps series delivers unprecedented performance , including a maximum rotational speed of 10 and position sensor
|
|
DC-Motors Series 5/6/7
True values last forever! The same applies to DC motors from Siemens. Even if it has been forecast long ago that the end is nigh for them, we shall retain this technology. After all, in daily use the DC motors have for decades proved their worth; it is therefore not necessary to consider an alternative.
Together with the SIMOREG DC-MASTER drive converter units they form the ideal drive set wherever competitive prices and high availability are required.
|
|
Welcome to Spohn + Burkhardt
Our Products
Our production program includes a diverse range of controllers, control stations, resistors, starters, in addition to a broad spectrum of controls for all types of transport machinery, construction and shipping cranes.
Our comprehensive series production is customisable in many different ways according to specific needs.
Our Company
The firm was founded in 1920 by Karl Spohn and David Burkhardt and remains in family ownership.
Our highly motivated team strives to achieve maximum customer satisfaction starting with the first contact through to after-sales service.
Our recipe for success has remained consistent over the years – and effective:
flexibility in product development and reliability in production.
Quality standards
A high quality standard – and therefore the complete satisfaction of our clients is one of our most important aims.
This is confirmed by various certifications, e.g. DIN EN ISO 9001-2000, CCC as well as by national and international standards, IEC 947, EN 60947, CSA and UL
|
|
CR455/CR355 Controller
GE's full complement of definite purpose controls (25A-40A) includes two-speed controllers for a variety of industrial electric equipment. These include air conditioning, heating, refrigeration, food processing, agricultural plus numerous other applications. The new feature rich controllers have been reduced 20% in size but retains 100% of the performance you have come to expect from GE. All definite purpose components by GE meet ARI780, UL, CSA and CE standards.
CR454/CR354 Starter
GE's full complement of definite purpose starters (25A-60A) are utilized in a variety of industrial electric equipment. These include air conditioning, heating, refrigeration, food processing, agricultural plus numerous other applications. The new feature rich starters have been reduced 20% in size but retains 100% of the performance you have come to expect from GE. All definite purpose components by GE meet ARI780, UL, CSA and CE standards.
|
|
Introducing the 1st intelligent starter capable of integrating motor control, control and changeover functions in a unit 45 mm wide! Compact, simple and modular, it adapts to all the applications.
Applications
Industry: ideal solution when the motor starter needs to be decentralized in the machine or the process
|
|
Welcome to Spohn + Burkhardt
Our Products
Our production program includes a diverse range of controllers, control stations, resistors, starters, in addition to a broad spectrum of controls for all types of transport machinery, construction and shipping cranes.
Our comprehensive series production is customisable in many different ways according to specific needs.
Our Company
The firm was founded in 1920 by Karl Spohn and David Burkhardt and remains in family ownership.
Our highly motivated team strives to achieve maximum customer satisfaction starting with the first contact through to after-sales service.
Our recipe for success has remained consistent over the years – and effective:
flexibility in product development and reliability in production.
Quality standards
A high quality standard – and therefore the complete satisfaction of our clients is one of our most important aims.
This is confirmed by various certifications, e.g. DIN EN ISO 9001-2000, CCC as well as by national and international standards, IEC 947, EN 60947, CSA and UL
|
|
CR455/CR355 Controller
GE's full complement of definite purpose controls (25A-40A) includes two-speed controllers for a variety of industrial electric equipment. These include air conditioning, heating, refrigeration, food processing, agricultural plus numerous other applications. The new feature rich controllers have been reduced 20% in size but retains 100% of the performance you have come to expect from GE. All definite purpose components by GE meet ARI780, UL, CSA and CE standards.
CR454/CR354 Starter
GE's full complement of definite purpose starters (25A-60A) are utilized in a variety of industrial electric equipment. These include air conditioning, heating, refrigeration, food processing, agricultural plus numerous other applications. The new feature rich starters have been reduced 20% in size but retains 100% of the performance you have come to expect from GE. All definite purpose components by GE meet ARI780, UL, CSA and CE standards.
|
|
Introducing the 1st intelligent starter capable of integrating motor control, control and changeover functions in a unit 45 mm wide! Compact, simple and modular, it adapts to all the applications.
Applications
Industry: ideal solution when the motor starter needs to be decentralized in the machine or the process
|
|
... see all the products in the category
Contactors
|
|
|