|
|
Torque ratings consistently high, gear ratios in close progression, numerous mounting options along with compact dimensions will ease the engineering of any application.The housing from nodular cast iron ensures robustness even in the harshest environment and the class of precision the gear are machined into helps producing an extremely quit and vibration-free operation.
|
|
The new range of universal helical gearboxes, establish a new standard on the market to refer to, having a suitable dimensioning fit for grant the maximum and constant reliability in the more heavy working conditions.
An effective answer to the power transmission requirements of the middle-heavy and heavy industry.
Ratio: Min 1/1,11 - Max 1/801
Torque (Nm): Min 1400 - Max 692000
Power (Kw): Min 0,72 - Max 9308 |
|
Features:
robust cast iron housing
gearing meets up to date international high standards
wide selection of motors and brake-motors including inverter-duty motors
units available for harsh environments
integrally cast foot or flange designs
sleek design for easy cleaning
all bearings selected to provide long and trouble-free operation
high quality sealing for enhanced leakage-protection
output side is integral part of the housing, no bolt-on output cover to cause leakage or gear-misalignment |
|
Right Angle Gearboxes with a wide range of Output Torque and Gear ratios available with brushless DC Motor.
G46 Compact right angle gearboxes to 20Nm torque.
G46M Compact right angle gearbox specifically for heavier duty mobility applications.
CTM1
* Voltage Range: 12 or 24 VDC
* Continuous Output Power: 250 Watts
* Maximum Output Torque: 1Nm
* Speed Range: 3790 RPM
* Size Diameter: 87mm
* Size Length: 66mm
* Weight: 1.16Kg
* Enclosure Rating: up to IP54
* Insulation: Class F
* Connection: Flying Leads
* Brake Option: Yes
CTM2
* Voltage Range: 12 or 24 VDC
* Continuous Output Power: 350 Watts
* Maximum Output Torque: 1.5Nm
* Speed Range: 3700 RPM
* Size Diameter: 87mm
* Size Length: 72mm
* Weight: 1.92Kg
* Enclosure Rating: up to IP54
* Insulation: Class F
* Connection: Flying Leads
* Brake Option: Yes |
|
Right Angle Gearboxes with a wide range of Output Torque and Gear ratios available with a range of DC Motors.
GEARBOXES
G30 Custom non declutch right angle gearboxes to 11Nm torque.
G34 Custom declutch right angle gearboxes to 40Nm torque.
G46 Compact right angle gearboxes to 20Nm torque
G46M Compact right angle gearbox specifically for heavier duty mobility applications.
G63 Compact Hi-Duty right angle gearboxes to 25Nm torque.
MOTORS
PM36 Custom permanent magnet motors up to 75 watts.
PM45 Custom permanent magnet motors up to 250 watts
PM55 Custom permanent magnet motors up to 300 watts.
PM62 Custom permanent magnet motors up to 500 watts |
|
Torque Range
100 Nm... 14.000 Nm
Mechanical Rating (n1= 1400 min-1)
0,22 ... 150 kW
Gear ratios
5,4 ... 1715
Output Configuration
Foot and Shaft mount - Two Bore Options per Size
Keyless Shrink Disc Fitting
Metric or Inch series Solid Output shaft
Taper bushings matching more shaft diameters
Splined hollow shaft to DIN 5480
Input Configurations
IEC and NEMA motor Adaptors
Servomotor adapters
Metric or Inch series Solid Input Shaft
Applicable AC motors
Integral motors and Brake motors - M series
IEC-normalized Motors and Brake motors - BN series
Single and Dual Speed Motors
Main Brake Features
DC and AC supply
Faster Brake Engage/Disengage through Electonically
Controlled AC/DC Rectifier type SB, NBR, SBR (options)
Main Motor Options
Thermistors and Thermostates sensor
Separate Supply Forced Ventilation
Line Driver and Push-Pull Incremental Encoder
|
|
Slightly after the market introduction of the gearboxes RX 800 line the bevel helical series RX 700 is now ready to be launched as a natural complementary range covering the low powers of a product line used as a market reference for longer than 40 years.
Sturdy monolithic housing with multiple fixing and connection positions, gears widely oversized and overrated as well as many accessories and optionals making it a strong and realiable product. |
|
No better, easier and neater installation than with a shaft mounted unit of the F series. Lightweight and performing, an F unit is the dependable drive for all the material handling applications.
|
|
AC synchronous geared motor with flat transmission ASM fG 05 or 20
|
|
107 AC
115/230V PSC TEFC AC Design
AC Parallel Shaft Gearmotors: 207 AC
115V Shaded Pole Open Fan Cooled AC
115V Totally Enclosed Fan Cooled AC Design
Product Features
Castings: Zinc Die Castings
Lubrication: Grease
Gears: Phenolic High Speed and Hardened Steel Ball Bearings On Motor
Mounting: All Positions
Rotation: Reversible
Seals: O-Ring Type On Output
Agency Approval: UL & CSA
Other products
307 AC
115V Split Phase, Open Dripproof AC Design
407 AC
115V Split Phase, Open Dripproof AC Design
507 AC
115/230V PSC, TENV AC Design |
|
107 DC Parallel Shaft Gearmotors
12V & 90V PMDC TENV Design
507 DC
12V & 90V PMDC, TENV Design
Product Features
Castings: Zinc Die Castings
Lubrication: Grease
Gears: Plastic High Speed and Steel
Bearings: Porous Bronze Sleeve on Gear Case, Ball Bearings on Motor
Mounting: All Positions
Rotation: Reversible
Seals: O-Ring Type on Output
Agency Approval: UL & CSA |
|
* MRP6 :
APPLICATION :
brush motor for cleaning machines walk behind, or riders, etc.
FEATURES :
Type of motor mounted: MP80
Gearbox: parallel axis with steel gears
Reduction ratio: 10/1
Power up to: 600W
Electromagnetic brake available |
|
F series Parallel shaft Helical gear units overview:
Parallel output , structure compact , carrying bigger torque,operation stable, voice low, lifetime long.
Mounting mode: foot-mounted, flange-mounted, torque arm-mounted.
Ratio: ratio of 2-stage is 8.1-191, ratio of 3-stage is 28.2-273, ratio of combination is up to18509.
For 2-stage basic type geared ,rotation direction of input shaft is the same that of output shaft; for 3-stage basic type geared ,their directions are reverse;for combination, please contact Boneng.
Output mode: hollow shaft output or solid shaft output.
Average efficiency: 2-stage 96%, 3-stage 94%, F/CR 85%.
Ratio: 4.3-273
Torque: 0.11-18kN
Power: 0.12-200kW
|
|
With MOTOX we offer both a modular geared motor range and a comprehensive range of frequency inverters.
Torque range: up to 20,000 Nm
Power rating: up to 200 kW
|
|
SEW-Eurodrive's F-Series parallel helical gearmotor lives up to its name as the ideal drive for tight space conditions. This compact drive, with its multiple mounting configurations, is a rugged alternative to right angled gearmotors.
- Reducers
Gears manufactured from certified steel, heat treated to a case hardness of 58-62 Rockwell C for long gear life
Finished ground or shaved gear teeth to assure maximum mechanical efficiency (1-1/2% loss/gear stage), minimum noise and heat generation
High capacity anti-friction bearings for optimum load carrying capacity and long life
Double output seal design consisting of patented bi-helix inner seal made of Viton® and double-lip Nitrile (Buna-N) outer seal*
Captured keys on output shafts
Gearcases made of high-strength gray cast iron, SAE Class 30. F27 and smaller, made of high-strength, pressure-cast aluminum
High cross-section modulus design, rugged monobloc design for maximum rigidity
Center tapped holes on output shafts
Available with inch dimension, hollow or solid output shafts
- Motors
NEMA Design B/C
Inverter duty
Connection terminals
Quick disconnect IS terminal box option for fast motor replacement
Extremely low motor inertia
Mark for shipment into Europe |
|
The uniblock gear case machined on all sides, the particularly stable case and minimum outside dimensions enable diverse mounting options and applications.
As a result, these motors often form an integral part of our customers’ machine designs. High precision manufacturing and top gearing quality guarantee minimum backlash in Watt Drive gear units. |
|
607AC
115/230V PSC, TEFC AC Design
Product Features
Castings: Zinc Die Castings
Lubrication: Grease
Gears: Steel
Worm: Hardened Steel
Ouput Gear: Cast Iron
Bearings: Porous Bronze Sleeve on Gear Case, Ball Bearings on Motor
Mounting: All Positions
Rotation: Reversible
Seals: Lip Seal on Output
Agency Approval: UL & CSA |
|
607 DC
90V PMDC, TENV Design
Product Features
Castings: Zinc Die Castings
Lubrication: Grease
Gears: Steel
Worm: Hardened Steel
Ouput Gear: Cast Iron
Bearings: Porous Bronze Sleeve on Gear Case, Ball Bearings on Motor
Mounting: All Positions
Rotation: Reversible
Seals: Lip Seal on Output
Agency Approval: UL & CSA
|
|
Permanent magnet DC gear motors :
* AOMPI40 :
APPLICATION :
brush motor traction for trolleys, welding machines, small vehicles, golf, etc.
FEATURES :
Type of motor mounted: permanent magnet
Gearbox: steel worm and worm gear rolled or rectified with plastic or bronze gear
Reduction ratio: 12/1 - 18/1 - 37/1 - 65/1
Power up to: 200W
Electromagnetic brake available
* MRP4 :
APPLICATION :
brush motor traction for small vehicles.
FEATURES :
Type of motor mounted: permanent magnet
Gearbox: parallel axis with steel gears
Max diameter exit axles: 20 mm [0.78 in]
Axles material: AISI 303
Power up to: 200W (MP56) - 600W (MP80)
Electromagnetic brake available |
|
R-Series : MobilePower™ Transmissions
Right-Angle Gearbox
Smooth. Precision.
The R-Series right-angle motor gearboxes are designed for low-voltage, high-torque applications typically found in battery operated vehicles. Combine a precision two-stage gearbox with an ElectroCraft BLDC motor to transfer power smoothly and quietly to your drive wheels. The gearbox features all metallic gearing hobbed to a precision AGMA 9 class to provide durable, quiet performance. |
|
| The Hyponic geared motor is based on 60 years of experience in the development and manufacture of gear and drive solutions. To date there are over a million Hyponic geared motors in service. The latest generation is characterized by a more compact design, a modular system, maintenance-free operation and universal installation positions. With the IP65 (wash down) option, the Hyponic is an ideal solution for beverage bottling plants and food manufacture. Hypoid gearing technology in case hardened steel, patented by Sumitomo, provides high efficiency and is far superior to the customary worm gears due to gear ratios from 5:1 to 1440:1. The Hyponic gear combines the cost advantages of the worm gear with the technical characteristics of a bevel gear. |
|
Features & Benefits
- Utilize same motor end as Series 2000 Gearmotors
- Foot and flange mount worm and worm-helical available
- Torque range up to 3,500 In/Lbs
- Innovative self-locking taper shaft connection (motor to gear) allows on-site replacement without removing primary pinion, or disconnecting the load. This ensures precision alignment and eliminates fretting to expedite motor removal
Industries
- Warehousing
- Food Processing
- Bottling |
|
The Sumitomo Hyponic gearmotor represents 60 years of excellence in the design and manufacture of premium gearing solutions. With over one million Hyponics currently in service, the newest model features a more compact, modular housing, maintenance-free grease lubrication, and high efficiencies. Options include C-Face configurations and gearmotors. With washdown duty as a standard option, Hyponic is the ideal choice for bottling, bakery, and food processing industries. Sumitomo's patented all-steel hypoidal gear technology is extremely high-performance and exceptionally more efficient than worm gearing across ratios from 10:1 to 240:1.
Features & Benefits:
- Patented Hyponic gear technology is up to 90% efficient across all ratios and requires no cooling fan
- Offset, all-steel hypoid design transmits torque more efficiently for more torque per unit in a smaller, more compact size
- Grease lubrication is trouble-free, with no oil to change or maintain
- Compact and lightweight design in an aluminum, corrosion resistant housing with optional washdown protection
- Optional plug-in shaft and bolt-on feet afford multiple mounting configurations
- Hollow bore makes installation and retrofit quick and easy
- Extremely quiet, smooth operation is ideal for commercial use
- Two-year warranty
- Optional popular bore sizes available from stock: 1 3/16", 1 7/16", 1 15/16", 2 3/16" |
|
607 Universal
115V Universal, Vented Design
Product Features
Castings: Zinc Die Castings
Lubrication: Grease
Gears: Steel
Worm: Hardened Steel
Ouput Gear: Cast Iron
Bearings: Porous Bronze Sleeve on Gear Case, Ball Bearings on Motor
Mounting: All Positions
Rotation: Reversible
Seals: Lip Seal on Output, Left / Right / Double Configuration Available
Agency Approval: UL & CSA
|
|
| ... products without technical information |
| |
|
|
see the results for the following category
