|
|
Top torque density, product variety, extremely wide speed choice, great compactness and price effectiveness make the C series the unparalleled line of helical gearmotors and speed reducers.
|
|
High performance geared motors with orthogonal shaft. Available in 7 sizes up to 75 kW. Reduction ratios of 1/5 to 1/125. (Ratios up to 1/10000 when reducer combined)
Compabloc Cb 1500 Series
Compabloc 1500 geared motors with helical gears are used to adapt the speed of an electric motor to that of the driven machine.
Rated output torque : from 10 to 60 N.m.
Power rating : from 0.06 to 0.55 kW.
Reduction ratios : from 7.2 to 203.
From two to four reduction stages.
High efficiency.
Reversible.
Silent operation.
Compabloc 2000 Series
Compabloc 2000 geared motors with helical gears are used to adapt the speed of the electric motor to that of the driven machine.
A range of ten sizes : 26, 27, 28, 29.
Rated output torque : from 800 N.m to
16 000 N.m.
Power rating : from 0.37 to 90 kW.
Reduction ratios : from 1.25 to 160.
From one to three reduction stages.
High efficiency : 95 % to 98 %.
Reversible.
Silent operation.
|
|
Parker's Stealth Gen II Helical Planetary Gearheads provide performance enhancements that include higher radial load capacities (four times greater in some cases) and increased service life (nearly double) resulting from the incorporation of more robust bearing support, dual angular contact bearings to support the output carrier, full complement needle bearings to support the planet gears and optimized gearing geometries. Internal design changes allow for one fill level for any orientation, resulting in shortened part number designation and simplified order placement.
The redesign incorporates a simplified motor mounting kit design, which will enhance Parker’s ability to build to stock allowing for quicker deliveries (potentially same day). Parker’s distribution channel will have a similar advantage, since gearheads of specific frame size and ratio could be stocked, then upon receipt of customer orders, a separate mounting kit could be pulled from their stock or delivered immediately from Parker Bayside. The new “universal” mounting kits (designated “MU”) are designed to be used across multiple product lines; therefore, axes that demand high precision -- Stealth Gen II (PS, RS), mid-range precision Stealth Gen II (PX, RX) and lower precision (PV) -- utilize the same mounting kit part numbers within the same frame size.
|
|
Top torque density, product variety, extremely wide speed choice, great compactness and price effectiveness make the C series the unparalleled line of helical gearmotors and speed reducers.
|
|
In-Line Gearboxes to 30Nm torque and 120Nm torque ratios. Available with a range of DC Motors and varying ratios.
Including:
G120 In-line gearboxes to 30Nm torque.
IMS In-line gearboxes to 120Nm torque
PM36 Custom permanent magnet motors up to 75 watts.
PM45 Custom permanent magnet motors up to 250 watts.
PM55 Custom permanent magnet motors up to 300 watts.
PM62 Custom permanent magnet motors up to 500 watts.
|
|
MOTOR: Asynchronous single or three-phase with 2 or 4 poles, totally enclosed, with external ventilation. Thermal safety feature (single - phase model). Class F winding in accordance with VDE 0530. IP 65 protection in accordance with DIN 40050.
GEAR UNIT: With casing in die - cast aluminium. Case - hardened and hardened gear pairs with shafts rotating on roller bearings. Lubrication with long - lasting oil. Sealing rings made in special rubber for high temperatures. 14 gear ratios (i) available, from 6.48 to 372.8. Rated torque 20 Nm. Version B3 or B5.
|
|
MOTOR: Asynchronous single or three-phase with 2 or 4 poles, totally enclosed, with external ventilation. Thermal safety feature (single-phase-model). Class F winding in accordance with VDE 0530. IP 65 protection in accordance with DIN 40050.
GEAR UNIT: With casing in die-cast aluminium. Case-hardened and hardened gear pairs with shafts rotating on roller bearings. Lubrication with long-lasting oil. Sealing rings made in special rubber for high temperatures. 15 gear ratios (i) available, from 7.4 to 441.9. Rated torque 5 Nm. Version B3 or B5.
|
|
|
The PV Series Planetary Gearbox combines Power and Versatility with its wide combination of competitive output faces, high radial load capacities and maintenance free operation. The PV series is available in four metric/NEMA frame sizes and a large offering of ratios. Whether you%u2019re an OEM or an end user searching for competitive alternatives the PV offers a superior solution. Manufactured in the USA, Parker Bayside%u2019s PV series gearbox is universally the only choice.
|
|
The helical gearbox from the CMG series is available in 4 different sizes and has the following characteristics:
- Body and the PAM flange are made from aluminium
- The feet and output flange from iron
- The gears are always rectified for stages 1 and 2
- Permanent lubricant
The intensely thought out engineering behind the project allows us to make up the gears quickly by combining specific kits: this reduces the number of components and codes to manage and speeds up assembling and delivery time, which makes management easier and reduces warehouse costs.
The CMG is unique in its type as it is characterised by a higher grade of modularity which makes it ideal for many applications. Starting from the standard base it is possible to configurate the gear according to the applications requirements.
|
|
MOTOR: Asynchronous single or three-phase with 2 or 4 poles, totally enclosed with external ventilation. Thermal safety feature (single-phase model). Class F winding in accordance with VDE 0530. IP 65 protection in accordance with DIN 40050.
GEAR UNIT: With die-cast aluminium casing in the first stage (worm) and steel casing in the second stage, which is planetary with three internal planetary gears. Wheel rim in special bronze 120-160 HB hardness. Worm gears in hardened steel with grinding threads rotating on ball and roller bearings. Lubrication with special long-lasting oil.
Sealing rings made in special rubber for high temperatures. 9 gear ratios (i) available, from 33,25 to 475. Rated torque 90 Nm. Version B3 or B5. B5/S left version - B5/D right version.
|
|
MOTOR: Asynchronous single or three-phase with 2 or 4 poles, totally enclosed with external ventilation.
Thermal safety feature (single-phase model). Class F winding in accordance with VDE 0530. IP 65 protection in accordance with DIN 40050.
GEAR UNIT: First stage with die-cast aluminium case, second stage in steel. Case-hardened and hardened gear pairs with shafts rotating on roller bearings. Lubrication with long-lasting oil. Sealing rings made in special rubber for high temperatures. 15 gear ratios (i) available, from 37 to 2209.5. Rated torque 23.5 Nm.
Version B3 or B5.
|
|
Portescap offers a variety of gearmotor and gearheads.
• Torque range of 10.4 mNm (1.47 oz. in.)
to 9534 mNm (1350 oz. in.)
• Reduction ratio of 5:1 to 2048:1
• Compact design
• Compatible with an array of specialty motor offerings
Details
Spur gear concept:
Only 1 transmission point per train
Input wheel made of special grade plastics
Planetary concept:
3 or 4 transmission points per train
|
|
|
Production of worm gear units and electric motors sizes 030 to130 reduction ratio 1:7 to 1:100
|
|
Torque ratings consistently high, gear ratios in close progression, numerous mounting options along with compact dimensions will ease the engineering of any application.The housing from nodular cast iron ensures robustness even in the harshest environment and the class of precision the gear are machined into helps producing an extremely quit and vibration-free operation.
|
|
The new range of universal helical gearboxes, establish a new standard on the market to refer to, having a suitable dimensioning fit for grant the maximum and constant reliability in the more heavy working conditions.
An effective answer to the power transmission requirements of the middle-heavy and heavy industry.
Ratio: Min 1/1,11 - Max 1/801
Torque (Nm): Min 1400 - Max 692000
Power (Kw): Min 0,72 - Max 9308
|
|
Features:
robust cast iron housing
gearing meets up to date international high standards
wide selection of motors and brake-motors including inverter-duty motors
units available for harsh environments
integrally cast foot or flange designs
sleek design for easy cleaning
all bearings selected to provide long and trouble-free operation
high quality sealing for enhanced leakage-protection
output side is integral part of the housing, no bolt-on output cover to cause leakage or gear-misalignment
|
|
Planetary Gearheads
Noiseless, gearheads with maximum noise reduction Focus, with minimum circumferential backlash
Performax®, the milestone in gear engineering (patent pending) with its high performance and extreme smoothness
Performax® High Radial Load, the downstream development from the Performax® series for major radial loads and smoothness not restricted
by radial loads
|
|
Compact, and yet extremely powerful, are the units of the 300 series. Their planetary drive train makes them the ideal choice for all the severe duty applications where shock loadings and impacts are more the rule than the exception. The product configuration is highly versatile, due to several options as far as the mounting, the gear layout, the output shaft and the motor interface. All the features are available for each of the 16 finely spaced frame sizes, spanning over the 1.000 - 450.000 Nm torque range. Finding the perfect match to any drive problem is therefore more than a wish, it is something users can safely rely on - always.
|
|
Planetary Gearheads
Noiseless, gearheads with maximum noise reduction Focus, with minimum circumferential backlash
Performax®, the milestone in gear engineering (patent pending) with its high performance and extreme smoothness
Performax® High Radial Load, the downstream development from the Performax® series for major radial loads and smoothness not restricted
by radial loads
|
|
Right Angle Gearboxes with a wide range of Output Torque and Gear ratios available with brushless DC Motor.
G46 Compact right angle gearboxes to 20Nm torque.
G46M Compact right angle gearbox specifically for heavier duty mobility applications.
CTM1
* Voltage Range: 12 or 24 VDC
* Continuous Output Power: 250 Watts
* Maximum Output Torque: 1Nm
* Speed Range: 3790 RPM
* Size Diameter: 87mm
* Size Length: 66mm
* Weight: 1.16Kg
* Enclosure Rating: up to IP54
* Insulation: Class F
* Connection: Flying Leads
* Brake Option: Yes
CTM2
* Voltage Range: 12 or 24 VDC
* Continuous Output Power: 350 Watts
* Maximum Output Torque: 1.5Nm
* Speed Range: 3700 RPM
* Size Diameter: 87mm
* Size Length: 72mm
* Weight: 1.92Kg
* Enclosure Rating: up to IP54
* Insulation: Class F
* Connection: Flying Leads
* Brake Option: Yes
|
|
Right Angle Gearboxes with a wide range of Output Torque and Gear ratios available with a range of DC Motors.
GEARBOXES
G30 Custom non declutch right angle gearboxes to 11Nm torque.
G34 Custom declutch right angle gearboxes to 40Nm torque.
G46 Compact right angle gearboxes to 20Nm torque
G46M Compact right angle gearbox specifically for heavier duty mobility applications.
G63 Compact Hi-Duty right angle gearboxes to 25Nm torque.
MOTORS
PM36 Custom permanent magnet motors up to 75 watts.
PM45 Custom permanent magnet motors up to 250 watts
PM55 Custom permanent magnet motors up to 300 watts.
PM62 Custom permanent magnet motors up to 500 watts
|
|
Torque Range
100 Nm... 14.000 Nm
Mechanical Rating (n1= 1400 min-1)
0,22 ... 150 kW
Gear ratios
5,4 ... 1715
Output Configuration
Foot and Shaft mount - Two Bore Options per Size
Keyless Shrink Disc Fitting
Metric or Inch series Solid Output shaft
Taper bushings matching more shaft diameters
Splined hollow shaft to DIN 5480
Input Configurations
IEC and NEMA motor Adaptors
Servomotor adapters
Metric or Inch series Solid Input Shaft
Applicable AC motors
Integral motors and Brake motors - M series
IEC-normalized Motors and Brake motors - BN series
Single and Dual Speed Motors
Main Brake Features
DC and AC supply
Faster Brake Engage/Disengage through Electonically
Controlled AC/DC Rectifier type SB, NBR, SBR (options)
Main Motor Options
Thermistors and Thermostates sensor
Separate Supply Forced Ventilation
Line Driver and Push-Pull Incremental Encoder
|
|
Slightly after the market introduction of the gearboxes RX 800 line the bevel helical series RX 700 is now ready to be launched as a natural complementary range covering the low powers of a product line used as a market reference for longer than 40 years.
Sturdy monolithic housing with multiple fixing and connection positions, gears widely oversized and overrated as well as many accessories and optionals making it a strong and realiable product.
|
|
No better, easier and neater installation than with a shaft mounted unit of the F series. Lightweight and performing, an F unit is the dependable drive for all the material handling applications.
|
|
|
Simple and yet powerful is the S series, developed for the pump industry as well as the fan and blower application. Foot and flange mounted, with shaft dimensions to the UNEL standard.
|
|
Conventional DC motors use a stationary magnet with a rotating armature combining the commutation segments and brushes to provide automatic commutation. In comparison, the brushless DC motor is a reversed design: the permanent magnet is rotating whereas the windings are part of the stator and can be energized without requiring a commutator-and-brush system. Therefore this motor type achieves very long, trouble-free life even while operating at very high speeds.
Key Attributes:
- Frame sizes range from 12.7mm (0.5 in.) to 58mm (2.3 in.)
- Speeds up to 100 000 rpm
- Torque range of 3.3 mNm (0.32 oz. in.) to 316 mNm (44.7 oz. in.)
- Speed, direction, current control option are available
- Autoclavable features available
- Versions without hall sensor
- Versions with hall effect sensors
Characteristics:
- Essentially Linear torque/speed curve, with torque proportional to current and speed proportional to voltage
- No mechanical commutation via brushes
- Improved heat dissipation
- No detent torque
- Tipically used in application with variations of speed or load
- Typically used in incremental motion
Advantages:
- Ease of speed and position control
- Very long life, high reliability, insensitive to environment (no arcing), motor is dust free with reduced audible and electrical noise levels
- Overload capability
- Excellent velocity smoothness
- Very simple commutation circuitry
- Very precise speed and position control
|
|
Features:
robust cast iron housing
gearing meets up to date international high standards
wide selection of motors and brake-motors including inverter-duty motors
units available for harsh environments
integrally cast foot or flange designs
sleek design for easy cleaning
all bearings selected to provide long and trouble-free operation
high quality sealing for enhanced leakage-protection
output side is integral part of the housing, no bolt-on output cover to cause leakage or gear-misalignment
|
|
|
