|
|
MIJNO PRECISION GEARING utilizes the highest performance, newest generation equipment for the production and control of your transmission components. Our expertise has earned the trust of robotic, medical, military, nuclear and aerospace industries. Our 120 machine-tools are used by more than 75 highly skilled workers that learn continuously the most innovative technologies. We are certified ISO 9001.
Precise manufacturing provides very precise pitch-line location and minimal cumulative error per meter. Hardened or not-hardened teeth available. Precision matching pinions in your preferred geometry are a specialty.
- Cutting: mod. 0.5 to 18; L max. = 2100 mm ; ISO 7
- Grinding: mod. 0,5 to 18; L max. = 2100 mm ; ISO 5 to 6
Try our patented Rotaxe® tooth profile for your high speed applications.
Send us your drawings for quotation at mijno@aol.com or by fax at +33.4.77.43.74.44
|
|
MIJNO PRECISION GEARING utilizes the highest performance, newest generation equipment for the production and control of your transmission components. Our expertise has earned the trust of robotic, medical, military, nuclear and aerospace industries. Our 120 machine-tools are used by more than 75 highly skilled workers that learn continuously the most innovative technologies. We are certified ISO 9001.
Precise manufacturing provides very precise pitch-line location and minimal cumulative error per meter. Hardened or not-hardened teeth available. Precision matching pinions in your preferred geometry are a specialty.
- Cutting: mod. 0.5 to 18; L max. = 2100 mm ; ISO 7
- Grinding: mod. 0,5 to 18; L max. = 2100 mm ; ISO 5 to 6
Try our patented Rotaxe® tooth profile for your high speed applications.
Send us your drawings for quotation at mijno@aol.com or by fax at +33.4.77.43.74.44
|
|
With Our Large Selection of Standardized Products,
We Can Meet All Your Precision Linear Motion Requirements!!
KHK stock racks are made for high precision linear motion applications. We offer a large variety ranging from module 0.5 to 10 and lengths from 100 to 2000mm. Please use corner racks (SSR and SIR series) when you want to change the direction of linear motions.
|
|
Dedicated to racks & pinions drive applications, the KRP+ design is based either on the use of one single unit or on the association of two top quality planetary reducers, mounted in parallel on the machine main frame.
When used as a SingleDRIVE, the KRP+ gives the benefit of an ultra high stiffness feed gearbox, dedicated to high performances rack & pinions drive systems.
When choosing the mechanical preload solution, the KRP+ become a DualDRIVE unit, which achieve the true backlash free feature by torsionally winding one pinion against the other through the rack.
Immediate benefits are to need only one motor, and to dramatically simplify the motor control.
When choosing the Electrical preload solution, the KRP+ is used as a TwinDRIVE unit, where the backlash is cancelled by the opposite torque balance between the two pinions, according with the two motors and drives remote control.
|
|
Dedicated to racks & pinions drive applications, the DRP+ design is based on the association of two top quality planetary reducers, mounted in parallel on an extra high stiffness universal frame.
When choosing the mechanical preload solution, the DRP+ become a DualDRIVE unit, which achieve the true backlash free feature by torsionally winding one pinion against the other through the rack.
Immediate benefits are to need only one motor, and to dramatically simplify the motor control.
When choosing the Electrical preload solution, the DRP+ is used as a TwinDRIVE unit, where the backlash is cancelled by the opposite torque balance between the two pinions, according with the two motors and drives remote control.
|
|
powerful diversity
Modul 2 and 3 available
2 different rack qualities
PLV and PLE combinations possible
|
|
Spur Gears
A new range of 20° PA. spur gears all manufactured in medium carbon steel, provide selection from 1 Mod. through to 6 Mod. pitch with gears from 12 teeth to 120 teeth. Gears have face width equal to ten times Mod. number to provide sensible power transmission capability. To supplement the steel gears is a select range of cast iron wheels covering pitch range 2 Mod. to 5 Mod.with 30 to 60 tooth size.
Straight Racks
Available in standard lengths of 05, 1.0 and 2.0 metres is a range of 20° PA straight cut racks with pitch range 1 Mod. to 6 Mod. These are designed to combine with the standard spur gears to provide low cost conversion of rotary to linear motion.
|
|
We provide the complete alpha solution through project engineering and the supply of all necessary system components from one source.
Rack & Pinion overview
- weight and space-saving mounting method
- all mounting surfaces ground to tight tolerance results in
flexible mounting options
- optimised smooth and low noise level
- high reliability due to wear-resistant surface treatment
and individually deburred gear teeth
- maximum possible feed dynamics with short
acceleration times
- maximum precision for lifting axes
- maximum operational safety due to high overload
capacity
- Quality 5 (AGMA-11) through permanent checks
according to DIN 9001
- ultra-high linear accuracy
|
|
spur racks, straight spur toothed, up to module 4;
lenght 1000 mm
spur racks, helical toothed, up to module 1,25;
lenght 400 mm
|
|
Nexen offers an advanced new technology that revolutionizes linear motion. The Roller Pinion System (RPS) provides zero backlash, very high positional accuracy, unlimited length, very high speeds, 99% efficiency, high rigidity, low noise, low maintenance, corrosion resistance, and long life. This opens up
new design possibilities and provides the capability to achieve much higher levels of performance in machine designs.
The RPS's unique design eliminates many of the limitations of current linear drive systems like:
Ball Screws: Limited by critical speed, maximum speed, cumulative error, vibration, thermal expansion, supplemental cooling, noise, low efficiency, maintenance, and life.
Traditional Rack and Pinion: Limited by low accuracy and speed, backlash, tooth fatigue, noise, high cost of dual and split pinion systems, high maintenance, and short life.
Belt Drives: Limited by low accuracy, backlash, low load capacity, short lengths, belt stretch, and low rigidity.
Linear Motors: Limited by low load capacity, high cost, strong magnetic fields, and liquid cooling.
|
|
|
Thanks to a very large product range, an unceasing commitment to innovation, and extremely high quality levels, SEDIS is able to satisfy the requirements of the most demanding users.
|
|
Machining
The cutting of the straight or helical toothed racks goes from module 0.5 to 10, a width of 200 mm and a length of 1750 mm in a single cast.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category
