|
|
Peak 99.9995% H2 Generator
Trusted technology that has been proven successful in our CFH Range of Hydrogen Generators has now been incorporated into the design for our new Peak Hydrogen Generators.
Safety Features such as a Self- Check for internal leaks on Power- Up, Dual Safety in the form of pressure control and a mechanical pressure switch as well as forced air ventilation eradicate the risk of Hydrogen escaping into atmosphere.
The Hydrogen Generators also benefit of an automatic water loading pump, which loads water automatically from an external tank, allowing for easier and less frequent re-fills of de- ionised water.
The new smaller design of this generator range safes valuable space in your laboratory.
|
|
|
Hydrogen Generator LM Series belong to high-tech products in which the solid polymer electrolyte (SPE) that is the most advanced technology for producing hydrogen in the world is adopted. The generator generates pure hydrogen directly with electrolytic separation of pure water (deionized water) by a SPE cell. There is none of alkali solution to use. It can be used as hydrogen container replacement in many places and is safe, reliable, practical, easy to operate and carry.
|
|
The benefits of using hydrogen as a GC carrier gas are proven; faster analysis, improved resolution and longer column life. And, with the price of non-renewable helium increasing at a rapid rate, hydrogen is now a more cost-effective and environmentally friendly choice of carrier.
The Parker domnick hunter H-MD hydrogen gas generator features intelligent control and multiple fail-safe alarms to facilitate safe and fast analysis. In addition, purities higher than that achieved from bottled gas supplies ensure greater productivity, reduced bottom-line costs and higher quality GC data and analyses.
Parker domnick hunter also offers LCMS nitrogen gas generators which are designed to specifically match the gas requirements of individual LCMS instruments to facilitate optimum performance.
A range of zero, clean dry and CO2 free air systems are available and are approved for use with all major analytical instrumentation manufacturers, so compatibility, quality and reliability is assured.
|
|
Peak Scientific UHP Nitrogen Generators utilize a “Pressure Swing Adsorption” (PSA) method to extract pure Nitrogen from air. Unwanted gases are selectively adsorbed from compressed air into a porous Carbon Molecular Sieve (CMS) material.
This generator range has been developed specifically to produce a continuous supply of UHP Nitrogen for your Gas Chromatograph Applications. The NG Range only requires an electrical supply for operation and once installed, only minimal maintenance is required at regular intervals.
Our Range of High Purity Nitrogen Generators is available with or without internal air compressors and in various flow rates ranging from 250cc/min to 4L/min.
|
|
|
|
|
|
The nitrogen generator was designed spécifi quement to meet the requirements of flows, gas purity and pressure for instruments LCMS. it can be used for evaporations of samples. The nitrogen is produced by using membrane technology, to separate effi cacement the nitrogen of the other gas molecules present in the air ambiant.la falls of pressure is only of 1 bar, making easier the connection of the generator to your own network of compressed air.
Advantages
Improvement of the performances of the instrument the guaranteed constant purity of nitrogen improves the stability of the system and ensures of the reproducible results.
Improvement of the effectiveness of the laboratory volumes of relatively high gas required by instruments LCMS make a food by bottles inappropriate for these applications.
More important economy Return on investment < 1 year. No the hiring of bottles, not of infl ation of price.
Reinforced safety the produced nitrogen with low pressure and room temperature eliminates the dangers associated with the bottles with high pressure and handling from liquid nitrogen. Simple installation the generator can be installed easily. Do not require electricity and can be installed directly on a wall to optimize the place in the laboratory.
|
|
|
|
|
|
ISO 20' CONTAINERISED CYLINDER FILLING PLANT - TURN KEY
Iso 20' workshop container
The whole of the components is entirely mounted within a modified container serving as technical workshop divided in two areas with three access doors and a control board with digital display. The container is equipped with a dismountable metallic roof, an air cooling system as well as inside and outside lighting. Among other features, we may point out the special outdoor paint consisting in a primer surface treatment and finishing enamel coat .
The container represents an excellent protection against intrusions of any kind (dust, rain, thefts, and so on), it allows CPO units to be operated every door closed. Designed to be used outdoor, their ventilation system guarantees the efficiency of the whole device whatever the environment temperature and moisture conditions are.
Seemingly similar to any other 20 feet container, the CPO workshop container facilitates considerably the conveyance of the plant (pass for fork-elevator, bolt-on ISO corners). In addition to that, it can easily be loaded on an adapted trailer improving the mobility of the equipment to such a point that it can be operated from a spot to another without being taken off the trailer.
|
|
Claind’s nitrogen generators satisfy all laboratory analysis and industrial process needs with very few exceptions.
The range includes compact generators with built-in oil-free compressors, medium and high pressure generators for industrial applications, and special generators for OEM applications.
Claind’s nitrogen generators are based on PSA (Pressure Swing Adsorption) technology for maximum reliability and gas quality. Claind has also patented the Fast Purity system, the most significant innovation in the world of PSA technology in recent years.
|
|
|
|
|
|
KOFLOC Nitrogen Gas Generator MNT SERIES (2.5NL/min-20NL/min)
KOFLOC Nitrogen Gas Generator MNT SERIES is a small, low-cost nitrogen generator with a small compressor, allowing it to be used anywhere with just a 100 VAC power supply. The adsorbent (molecular sieving carbon selectively adsorb a large amounts of oxygen under high-pressure condition, quickly removing oxygen carbon dioxide and moisture out of air, leaving only the high purity nitrogen gas as the final product. The adsorbent material releases oxygen when depressurized. High-purity nitrogen gas can be produced continuously by PSA (pressure swing absorption), which is a method of alternately pressurizing 2 adsorption vessels.
FEATURES
♦ Fully automatic
♦ Compact
♦ 100 VAC power supply
♦ High-purity and dry (–55˚C or less) nitrogen gas can be obtained
♦ Aluminum pressure vessels
♦ Quiet operation
♦ Quick startup
♦ High purity (99.999%) is also available
APPLICATIONS
* Substitution for nitrogen gas cylinders
* For heat treatment processes
* Semiconductor processes
* CA storage gas for fruits and vegetables
* Non-oxidization seal gas
* Explosion-proof or rust-prevention gas
* Seal gas for shipping
* Blanket gas for synthetic fibers and melted spinning
|
|
|
The Parker Balston NitroSource Lab nitrogen generator can produce up to 500 lpm of pure LC/MS grade nitrogen at pressures up to 10 bar. The generator is engineered to transform standard compressed air into a safe regulated supply of nitrogen with minimal operator attention. Pressure flow rates and purities are specifically designed to match the stringent requirements of all the latest LC/MS instruments. Typical applications include LC/MS, LC/MS/MS, nebuliser gases for APCI and ESI, ELSD, Turbo Vaps and chemical solvent evaporation. The Nitrosource Lab technology has been tried and tested by all the major LC/MS manufactures.
|
|
|
|
|
|
The Parker domnick hunter MAXIGAS range of nitrogen gas generators has been developed to allow users to produce nitrogen gas on-site, without the need for traditional high pressure cylinder or liquefied gas supplies.
A Parker domnick hunter MAXIGAS nitrogen generator can help save up to 90% on nitrogen gas costs and can easily form the basis of a complete central nitrogen supply for several application including MAP (modified atmosphere packaging) gas flushing, pressure transfer and blanketing (of food stuffs and raw materials).
The MAXIGAS generators produce nitrogen gas from a virtually free resource %u2013 air. Designed to operate from compressed air, the generators deliver a continuous, uninterrupted supply of nitrogen gas at purity from 97%-99.999%.
The MAXIGAS systems offer the safest, most convenient and economic source of nitrogen available. The compact, modular design allows easy upgrading of the system as production capacity expands.
At 10 ppm oxygen content flow rates vary from 1.3 Nm3/hr to 6.5 Nm3/hr. At 1% the corresponding flow rates available are 11.8 Nm3/hr %u2013 59.1 Nm3/hr.
|
|
The LASERGAS nitrogen generator is a truly high range generator thanks to sophisticated technology and exceptional performance.
This unique gas generator is capable of producing nitrogen at very high pressure. It is available in various versions with different outputs, purity and pressure ratings.
The LASERGAS nitrogen generator can be used in any area of industry requiring a medium or high pressure nitrogen supply, or whenever intermittent demand requires large reserves of nitrogen to be kept ready for rapid consumption.
|
|
|
|
|
|
Specifically designed to operate LCMS Instruments manufactured by Applied Biosystems/ MDS Sciex, the AB-3G produces Nitrogen and Dry Air through 3 independent outputs in the required flow rates, purities and pressures to cater for the requirements of all available Applied Biosystems/ MDS Sciex LCMS Models, including the new API5500.
The AB-3G essentially combines two separate gas generator systems in one unit, with the source and exhaust gases (Dry Air) being generated using one system and the curtain gas (Nitrogen) being generated by the other. The AB-3G utilises proven membrane technology that selectively removes oxygen, moisture and other gases to leave clean, dry, phthalate free Nitrogen and Dry Air.
To ensure this new generator model, meets Peak Scientific’s high expectations with regards to reliability and performance, Peak Scientific has tested these new models extensively at our manufacturing plant and with end users around the world to ensure reliability and longevity of the systems.
Applied Biosystems/ MDS Sciex have further approved these products to supply Nitrogen and Dry Air to all of their LCMS Applications.
Peak Gas Generators are unique in that they are simple to install and easy to use. After initial installation and set up, the generator will operate continuously with virtually no operator involvement and optimum performance can be maintained with an annual service visit. Elimination of the purchasing process, storage and movement of cylinders will also significantly reduce the time and costs associated with supplying gas to an LCMS System.
|
|
Peak N2 Generator for LC/MS
The NM30LA Nitrogen Generator is Peak Scientific Instruments' proven solution for customers requiring Nitrogen for their LC/MS Application.
Specifically designed to supply LC/MS/MS analysers, the NM30LA produces nitrogen gas at the required flow rates, purities and pressures for these instruments.
The produced nitrogen gas is filtered down to 0.01micron and passed through an Active Carbon Filter to minimize the risk of contamination.
All of our gas generators for LC/MS are phthalate free.
Quiet in operation the NM30LA utilises separation technology to selectively remove oxygen, moisture and other gases to leave clean, dry, phthalate free
nitrogen.
2 Internal Air Compressors make the NM30LA a stand- alone, self- suffcient Nitrogen Generator, independent from external air sources.
|
|
|
|
|
|
One of Peak Scientific’s best known and loved products is the NM20ZA Nitrogen Generator. This generator model was designed in the year 2000 to cater for the requirements of Applied Biosystems/ MDS Sciex LCMS Applications.
However, time does not stand still and as Applied Biosystems/ MDS Sciex have further developed their applications, more and more gas was required- so much so, that the NM20ZA could no longer cater for the requirements of all API Models, but was limited to the range up to the API4000.
As such it was time for Peak Scientific to let the NM20ZA grow up and redevelop it in such a way that it could provide curtain, source and exhaust gas to the entire range, including the latest API5500.
The result is the brand new ABN2ZA Nitrogen Generator. Like the NM20ZA, which is still going to be available, this new model provides a source of Nitrogen gas as well as 2 independent supplies of clean, dry air.
With the ABN2ZA based on proven technology, it selectively removes oxygen, moisture and other gases to leave clean, dry, phthalate free Nitrogen and Dry Air. Two internal air compressors make this unit independent from in- house air supplies and fitted castors allow the user to easily position the unit in the lab. The unit has further been approved by Applied Biosystems/ MDS Sciex to supply curtain, source and exhaust gas to their LCMS Applications.
|
|
|
|
|
|
‘Plug and Play’ Nitrogen Generator for LC/MS
The Parker Balston® NitroFlow Lab is a self contained generator that produces up to 32 lpm of pure LC/MS grade nitrogen at pressures up to 8 bar. It produces nitrogen by utilizing a combination of compressors, filtration, and membrane separation technologies. High and low pressure compressors carefully matched to hollow fibre membranes separate the clean air into a concentrated nitrogen stream.
The combination of these technologies produces a continuous on-demand supply of pure nitrogen. Typical applications include LC/MS/MS nebulizer gases for APCI and ESI, ELSD, Turbo Vaps and chemical solvent evaporation. The NitroFlow Lab has been tried and tested by all the major LC/MS manufactures.
The unique combination of the dual compressor generator ensures that the NitroFlow Lab has several unique technical advantages over all other existing LC/MS Nitrogen Generators.
Nitrogen is produced at low pressure and then compressed to 8 bar. This ensures minimal maintenance of the system with no compressed air filter replacements or condensate. The compressor life is guaranteed under the Parker Balston warranty for 8000 continuous running hours, the longest currently available on the market.
Parker Balston is the worldwide leader in separation and filtration technologies, and offers a broad range of analytical gas generators to meet your specific analytical instrument requirements. All products are backed by a fully staffed field sales and service organization.
|
|
|
|
|
|
CHARACTERISTICS
Compressor of air integrated 99,999%
N2 flow: 3L/min and 5L/min
Interface LCD of piloting and hour meter
Indication of maintenance by a luminous indicator
ADVANTAGES AND ECONOMIES
Conceived specifically to meet the requirements of flows and purities of the analytical instruments
Increase in the analytical performances
Increase in the effectiveness of the laboratory
Reinforced safety
More important economies
Simple installation
Recommended and approved by the manufacturers of instrumentations LCMS
APPLICATION
Produced nitrogen high purity starting from compressed air.
Replace the nitrogen bottles for the following applications:
- LCMS/MS
- DETECTOR ELSD
- EVAPORATION Of SAMPLES
Principle of operation
The nitrogen is produced by using membrane technology, starting from a network of compressed air without oil or pre treaty of a mini pressure. of 110 psi.
The fall of pressure is only of 10 psi (0.5 bar), weakest of the market, making easier the connection of the generator to your own network of compressed air.
The membrane functions on the principle of the selective permeation, or oxygenates it, the steam and CO2 which are fast gases crosses the membrane, while the nitrogen, gas slow, continuous to circulate in the form of gas flow inside the membrane.
|
|
Peak N2 Generator for API LCMS
The NM20Z is a self contained Gas Station designed specifically for the API Analyser Range. It is a plug and play system, fully tried and tested. You will be operational in minutes and running analysis without interruption.
This generator is also available with internal air compressors.
Features & Benefits
Three gas lines from one system
No more cylinders, regulators, re-ordering or safety issues
Quiet operation
Simple to install to any analyzer
No electrical requirements
Wall mountable
24 hour operation
|
|
|
|
|
|
Parker Balston® SOURCE LCMS-5000 Series is now available for Applied BioSystems MDS Sciex API-LC/MS users
The Parker Balston® SOURCE-LCMS-5000 is a visually integrated and functionally modular LC/MS gas generation system which produces high purity nitrogen, zero air and exhaust pump gases for all Applied Biosystems – MDS Sciex LC/MS/MS instruments.
It produces nitrogen, zero air and pump exhaust air by utilizing a combination of a compressor with filtration, catalysts and membrane separation technologies. An integrated low-maintenance compressed air supply is filtered by high efficiency coalescing filters removing all contaminants down to 0.01 micron. Hollow fiber membranes subsequently divide the clean air into a concentrated nitrogen stream. The zero air is produced by catalytic oxidation which converts the hydrocarbons. A passive hollow-fiber dehydration membrane is used to create the exhaust pump gas.
The integrated Scroll compressor is ‘whisper’ quite at only 48 dBA and is supplied as standard with a 10,000 hour / 3 year warranty. Low maintenance and reliable this offers the best compressor warranty currently available on the market.
Parker Balston is the worldwide leader in separation and filtration technologies, and offers a broad range of analytical gas generators to meet your specific analytical instrument requirements. All products are backed by a fully staffed field sales and service organization.
|
|
SKID MOUNTED CYLINDER FILLING PLANT – TURN KEY
The CFO Line presents the same specifications than containerised versions (cf. CPO Line). Note that skid mounted devices must be settled indoor in a place sufficiently ventilated. Apart from that, they only can be operated on a static basis. Due to their higher sensitiveness to their environment, the operator will have to make sure the operation area is adapted and isolated.
|
|
The HMXT Generator design is a refinement of the proven TITAN™ HM and HS generators. New features provide added benefits for the user. A distributed I/O system using DeviceNet Network provides flexibility, additional operational data, and reduced installation time. A modernized human machine interface (HMI) permits easy operator access, data history, and remote operation. An efficient layout helps to reduce scheduled preventive maintenance time by up to 30%. In addition, the gas delivery pressure has been increased to 10 bar.
Ultrapure Gas
Ultrapure (99.9998%), on-demand hydrogen gas delivery at useable 10 bar pressure with no additional purification required
Pressurized, ultrapure oxygen (99.999%), free of hydrocarbons and other atmospheric contaminants, with
use of auxiliary purifier
|
|
|
|
|
|
This equipment is supplies generating a clean hydrogen gas and oxygen gas by high purity without any in impurities by adoption of ion exchange membrane type water electrolysis.
Water electrolysis by using ion exchange membrane, “Electric energy to convert directly into Hydrogen and oxygen.” “Gas Generation to control safely and easily.” “Gas Generation Reactor to be simple.”
Applications
For fuel cell
For various burnings
For hydrogen water manufacture
As a hydrogen source and an oxygen source of other usages
Features
The High Pressure Gas Safety Law in Japan is not applied.
Since gas supply power is 100-300kPa, The High Pressure Gas Safety Law in Japan is not applied to it.
Only pure water is needed as material.
If there are even a power supply and pure water, supply of gas is possible anywhere.
Therefore, a worker is free from conveyance and exchange of a cylinder.
High safety
There is very few of gas staying within equipment, so the equipmewnt operation is excellent in safety.
Clean gas
The solid ion exchanged film is used for this equipment as the electrolyte for water electrolysis.Therefore, pure water electrolysis is possible, without using a strong alkaline electrolyte like conventional equipment.Antipollution measures, such as alkali waste fluid processing, are unnecessary entirely as well as clean gas being obtained by that.
Easy operation
Only by turning switchON, the gas controlled by fixed gas pressure is supplied immediately.
Maintenance-free
Since it is clean gas, there is no clogging of a pipe or a nozzle, and periodical cleaning of a troublesome electrolysis tub is also unnecessary.
|
|
|
|
|
|
This equipment supplies high density ozone water with strong sterilizing properties.
Compared with the conventional equipments for generating ozone water based on the systems of discharge electricity or ultra violet, this equipment is highly upgraded. This equipment applies our original electrochemical cell which has been developed successfully in order to generate extremely high density ozone water efficiently as well as raise the sterilizing properties.
Further, the used ozone water resolves into harmless oxygen and water by itself, and therefore it does not pollute the environment.
Features
High density ozone water
OZWU can supply high density ozone water which the conventional system of discharge electricity does not generate
High purity ozone water
Not generating impurities due to electrysis of pure water
Only pure water is needed as material
No need of equipment for generating oxygen as well as oxygen cylinder
High safety
No need for high voltage which the system of discharge electricity needs
Not generating impurities like NOx
Not causing noise of electromagnetic waveNo leak of ozone gas due to the complete electrolysis of excess ozone generated inside the equipment by using catalyst
|
|
|
|
|
|
ADVANTAGES AND ECONOMIES:
- Conceived specifically to meet the requirements of flows and purities of the analytical instruments
- Increase in the analytical performances
- Increase in the effectiveness of the laboratory
- Reinforced Safety
- More important Economies
- Simple Installation
- Recommended by Manufacturers of Instrumentation
APPLICATION:
- Produced nitrogen high purity starting from compressed air.
- Replaces the nitrogen bottles for the following applications:
- GC-Gas Vector
- GC-FID, NPD, ECD, AED
- ICP
- ELSD
- FAKE
- LCMS
- Food of a complete laboratory to supply several analytical instruments (LCMS, ICP, EVAPORATIONS Of SAMPLES)
Principle of operation of the PSA:
Technology used to produce a nitrogen flow high purity is adsorption with swinging of pressure. This technique uses a molecular bed of sieve with coal (CMS) to selectively eliminate O2 and the other contaminants from the ambient air. Alternate bed between the modes of purification and regeneration to ensure a continuous production of nitrogen.
The gas generator is designed to receive filtered pre compressed air with 7 barg provided by a compressor without oil (provided by the laboratory or integrated in the generator). This flow of filtered and compressed air passes then in the bed of CMS which is in mode of purification. At this point in time O2, CO2, moisture and certain hydrocarbons are eliminated from the compressed air, producing a gas flow nitrogenizes clean, dry and of high purity.
|
|
The H2 MAX3 Series is designed to satisfy the needs of industry.
This series of hydrogen generators is a true ambassador for Italian innovation and technology. Claind is the only Italian manufacturer of pressure electrolysis hydrogen generators capable of conforming to the strictest CE international safety standards (ATEX, PED).
Technical specifications
Output: from 0.5 to 30 Nm3/h
Delivery pressure: 15 bar (without auxiliary compressors)
Gas purity: 99.7% without deoxo, 99.999% with deoxo
CE certified (ATEX, PED)
BENEFITS
Safety: maximum operating safety.
Purity: Oxygen levels below 0.2% O2.
APPLICATIONS
Refuelling stations for hydrogen fuelled vehicles
Energy storage systems and research into renewable energy sources like peak shaving, UPS, and completely off-grid systems.
Industrial processes like annealing, noble metal welding, cooling of nuclear and other electrical power stations, food processing and pharmaceuticals.
|
|
Claind’s range of air generators and purifiers includes pre-compressed air treatment systems and generators of purified, dried and zero impurity air.
Claind has also developed a latest generation, high efficiency catalyser for hydrocarbon removal. This advanced system is already applied to the AZ2000 Series and AG2000 Series as well as to the NG2000 and ANG2000 nitrogen generators.
|
|
PSA Technology
Integrated air compressor : noise level (< 52db)
Flow rate : 3L / min et 6L/min
Purity achieved : HCs < 0,1 ppm and water dewpoint < - 40°C
Increased safety in the lab compare to the use of high pressure cylinders
Easy to install
Hour run meter
Quick and easy servicing : needs to change filter and silencer once a year
|
|
The SC-TOC-A has been tested extensively in the field by SWAN Environmental India, authorized Shimadzu Distributor for TOC. SWAN have approved this generator model to provide gas for both, NPOC and TC-IC Applications.
The generator operates on the principle of catalytic oxidation to effectively remove hydrocarbons (as CH4) to less than 0.1 ppm while 'Pressure Swing
Adsorption' Technology reduces the moisture content of the gas.
The SC-TOC-A is the only TOC generator on the market today, featuring an internal air compressor, thus o#ering a stand- alone solution, independent from external air sources.
|
|
|
Hydrogen offers tremendous advantages as a clean fuel source. Hydrogen, like electricity, is a clean energy carrier and when derived from renewable energy sources, hydrogen has the potential to provide an inexhaustible supply of energy without generating pollution or greenhouse gases of any kind. It can also be economical and have a relatively high margin of safety when properly produced, stored and dispensed.
|
|
Wellman Furnaces, Inc. offers a complete line of Exothermic Gas Generators for rich and lean operation. Standard sizes range from 750 SCFH to 30,000 SCFH. Refrigerated Gas Coolers can be provided to reduce the product gas dewpoint to the 40°F to 50°F range. Atmosphere Gas Analysis Panels are available to monitor the exo gas composition and control an optional trim valve in the burner fuel gas line to maintain the desired CO analysis.
Wellman Exothermic Gas and Steam Co-Generators will give you the process atmosphere gas you need and the added benefit of Free Steam. Major savings in both fuel and cooling water can be realized by combining your exothermic gas generator and steam boiler into a single unit. Paybacks range from six months to two years - Returning Your Initial Investment!
Exo Gas and Steam Co-Generators are available in sizes from 4,000 to 100,000 SCFH of exothermic gas, producing 390 to 9,780 lb/hr of steam.
|
|
* 500l/h of pure hydrogen at 8 bars without compressor
* System control fully electronic
* Unattended operation 100% static
Completely autonomous and 100% automatic, this equipment with a recognized reliability is perfectly studied to the enclosed sites particularities taking account their geographic locations, the difficulty linked to the electrical power supply and the communications means.
|
|
|
|