|
|
* Pure hydrogen production from 0,5 to 10 Nm3/h
* Adjustable pressure from 1 to 10 bars
* System control fully electronic
All the hydrogen generators series « BP MP » are skid mounted ; the control system is fully electronic and the cooling is through natural air.
|
|
# Chemical process with very easy use
# 3 m3 of hydrogen gas produce in less than 10 minutes
# Especially adapted to isolated regions
# Gas reserve possible
Easy to handle, this generator does not require any maintenance other than its cleaning after each hydrogen production operation.
|
|
|
|
|
|
Nitrosource
autonomous 100%, with a reduced maintenance, the Nitrogen generators Parker replace the bottles of gas and the liquid supply of nitrogen.
Applications: inertage, network of nitrogen, packaging of food products...
Based on membrane technology, Nitrosource is the nitrogen generator of evolutionary design, enabling you to extend the capacity of the generator on site without repurchasing a complete generator. It thus follows the evolution of the growth of your factory. It produces nitrogen in full safety 24:00 /24H, until 4000 Nm3/h.
Nitrosource® enables you to easily produce nitrogen on site starting from compressed air.
Nitrosource® is composed of a central processing unit which can be wide in term of capacity by the addition of 5 pennies units. Thanks to the design Master/slave, up to 11 central processing units and theirs under units can be connected between them and managed like a single generator.
Nitrosource integrates a station of filtration of compressed air of high-quality. This characteristic optimizes laquality of compressed air in entry of the generator, ensuring a great longevity of the hollow fiber membranes. The generator is equipped with a digital system of data management to record and communicate the parameters of operation such as the pressure, the flow and the residual concentration out of oxygen.
The equipment is deprived of parts moving, ensuring an operation without concern, durable and
almost without maintenance. The generator is ready to function as soon as the compressed air is connected.
Nitrosource offers an unlimited quantity of nitrogen to you and can be easily connected to an external reservoir of storage. This will enable you to absorb the peaks of consumption in your applications where the demand for nitrogen is variable.
Ideal solution to replace the nitrogen bottles or the liquid nitrogen supply.
|
|
Nitroflow BASIC
autonomous 100%, with a reduced maintenance, Generators Parker the nitrogen replace the gas bottles and the liquid nitrogen supply.
Applications: inertage, network of nitrogen, packaging of foodstuffs...
Based on membrane technology, Nitroflow BASIC is the nitrogen generator with the most compact, esthetic integrated compressor and silencer of the market (<55 dBa). it produces nitrogen in any safety 24:00 /24H, until 1,5 Nm3/h.
It integrates a piloting by microprocessor, a control and adjustment of the parameters of work on touch screen and an analyzer of O2 to visualize the nitrogen purity. The strong point of the system: the compressors have one lifespan longer than those of our competitors (patented exclusive system). 2 years or 8000 operating hours exclusive guarantee.
Ideal solution to replace a nitrogen bottle/day.
|
|
|
|
|
|
H Series hydrogen generation systems use PEM (Proton Exchange Membrane) water electrolysis technology to produce 99.999+% pure, pressurized hydrogen onsite at customers' sites using only water and electricity as inputs, and without a mechanical compressor.
Reliable, efficient, compact PEM cell stacks have been used to produce high-pressure oxygen and hydrogen in military and aerospace life support applications for over 20 years.
The H Series hydrogen generation systems are uniquely attractive for generator cooling and offer:
· Improved reliability of supply by eliminating the need for frequent deliveries
· Improved site security by eliminating the need for routine hydrogen delivery truck access
· Guaranteed pure, dry hydrogen meeting UHP specs - 99.999% hydrogen - free of hydrocarbons and other problem impurities
· Very low inventory improves siting flexibility and safety – essentially zero hydrogen inventory from NFPA viewpoint
· Eliminates the need to order, manage, move, count or connect cylinders to the hydrogen supply system
|
|
HySTAT™-A systems are widely used in the application for on-site generation because of the reliability of the equipment and the continuity of hydrogen supply. The cell design permits cell stack by cell stack monitoring of the generator, thereby ensuring safe operation. With installations at more than 150 power stations around the world, Hydrogenics products have provided a
safe, reliable and continuous source of hydrogen, with trouble-free operation over many decades.
|
|
|
|
|
|
Zero Air
SPECIFICATIONS / BENEFITS
-Purity < 0,1 ppm CH4
-Range of flow rate : 1,5 à 30 L/min
-Quick and easy servicing : consist into changing the inlet and outlet filter once a year
-Improved analytical performance : the reduction of methane ( CH4) to less than 0.1 ppm reduces background noise and improves the base line stability.
-Increased efficiency in the laboratory
-Improved safety
-Economy
-Simple installation
APPLICATION
Produce laboratory grade purified and hydrocarbon free air from an existing in house oil free compressed air supply.
Eliminates the need for inconvenient high pressure cylinders. it is ideal for use with :
-GC-FID, NPD, FPD
-THA
ULTRA Zero Air
SPECIFICATIONS / BENEFITS
-Purity achieved : CO, HCs <0,1 ppm ; CH4, NOx, SO2, O3 < 1 ppm ; CO2 < 5-10 ppm ; Water pressure dewpoint < - 50°C
-Range of flow rate : 1,5 to 30 L/min
-needs to change the inlet and outlet filter once a year. Alarme available for the replacement of the catalyst and the NOx cartridge after three years of operation.
-Improved analytical performance
-Increased the efficiency in the laboratory
-Increased safety
-Economy plus importantes
-Easy to install
APPLICATION
Produce laboratory high quality air from an existing in house oil free compressed air supply.
Eliminates the need for inconvenient high pressure cylinders. it is ideal for use with :
-GC-FID, NPD, FPD
-THA
-GC-ATD
-Electronical nose
-Calibration of test machine
|
|
Peak ZA Generator, low CH4
The Peak Scientific's range of Zero Air Generators produces a constant flow of zero grade air with a hydrocarbon content (as methane) of less than 0.1
ppm and with flow rates of between 1,500 cc/min and 30,000 cc/min. The Zero Air Generators are available with and without internal air compressor and as 19" rack version.
A catalytic oxidation process is used to produce a continuous supply of gas with methane hydrocarbon concentration reduced to less than 0.1ppm. In this process, air from the incoming compressed air supply is heated to 400degrees Celsius and passed through a platinum catalyst chamber where the free carbon and hydrogen atoms combine with oxygen in the air to form carbon dioxide and water. The air is then passed through a cooling coil to reduce its temperature to a safe level.
The generators are simple to install and users can relax in the knowledge that this range of Peak Generators can be supported by one of the Peak Product Support Options.
|
|
The Parker Balston Zero Air Generator can produce up to 30,000 ml/min of high purity zero grade air. Compressed air is pre filtered down to 0.01 micron and then purified using a state-of-art combined heated catalyst module.
There are no moving parts and no noise, making the generator extremely reliable and ideal to install in the laboratory. Simple and quick to install, the Zero Air Generator requires minimal maintenance just once a year.
The resultant air is free of total hydrocarbons (THC) to < 0.05ppm making it ideal for all FID applications. The low levels guarantee a low signal to noise ratio, ensuring a flat constant base line with no peaks or fluctuations.
|
|
- Light thermal mass heater: Comparing to conservative type brick furnace, there is lots of reduction in heat-up time, power consumption, and footprint.
- Stable gas generation: Tube type retort integrated in round heater can generate cracking gas stable.
- Safety feature: Excess temperature protection, over pressure, thermocouple burnt alarm, etc can maintain the system safe.
- Save footprint, easy operation: Operation switch install on front panel. Insulator got thinner and can realize less footprint.
|
|
For a continuous production of hydrogen and oxygen based on the principle of water electrolysis.
As a default, the HySTAT TM consists of a Process Part, a Power Rack and a Control Panel along with a complete set
of interconnecting cables. Hydrogenics also offers a wide selection of optional components to meet customer specific requirements.
|
|
| ... products without technical information |
| |
|
|