|
|
STARCOUP MM spray can is a cutting oil for all metals hard to cutt. It is a powerful reducer of friction, lubricant, anti welding, having an exceptional resistance to film.
Particularly recommended for drilling and tapping operations for all types of steels including with low coefficient of workability. Its strong
adhesiveness, prevents that it to be eliminated during centrifugation operation. STARCOUP MM improves lifespan of the tools and allows to obtain quality surface state.
|
|
Cutting Fluid
Ref: HDC
Industrial grade metal working oil
Powerful lubricant and friction reducer
Allows high speed punching
Extends tool life by reducing the risk of pulling
|
|
Réducteur Biodégradable F 10 is a a new generation penetrating fluid with multi uses properties: Penetrating fluid, deoxidizing, anti-humidity, lubricating agent, degreaser, tar remover, boiler cleansing compound, diluting agent for inks, anti-resin, coating and mastic cleaner.
Biodegradable, it is free from VOC (Volatile organic compounds) and non flammable.
Moreover, it is compatible with the majority of supports. |
|
Penetrating Fluid
Ref: DGT400
Grease prevents squeaking in mechanical assemblies, e.g. locks, hinges, etc
Ideal for breakdown and maintenance services
Penetrates and lubricates mechanical parts
Produces a highly water resistant film, providing long term corrosion protection
|
|
Molykote® compressor and pump fluids are formulated to meet or exceed the performance of comparable
OEM fill products. With the exception of L-3232 and L-3246, these fluids are all compatible with
mineral oils and systems designed for mineral oil lubrication. Dow Corning can perform oil analysis to
ensure that the right product is used for each application and that product life is maximized. |
|
The CUTTING OIL ENTIERE is a cutting fluid, containing paraffinic mineral oils, developed for the current operations in machining such boring, milling, turning and undercutting.
General-purpose product, it can be used on non-ferrous metals, mild steels, medium steels and the cast iron. |
|
| Dry Film Lubricant is an all purpose release agent and lubricant. Spray it on metal, glass, wood, plastic or other hard surfaces for a continuous Micronized Teflon® (U.S. Patent Office E.I. Dupont) particle coating that reduces the coefficient of friction between two surfaces and consequently produces lubricity, reducing equipment wear. The small amount required makes our Dry Film Lubricant with Teflon very cost effective. Use wherever a clean, dry, non-oily, non-staining lubricant is required including on conveyor belts, chains, chutes, hoppers, assembly lines and foundry patterns and molds. Effective temperature range is minus 400 degrees F to plus 500 degrees F. 20 oz. Aerosol Can / 18 oz Net Wt. |
|
| This transparent premium quality cutting oil is a carefully balanced blend of specialized additives that includes active sulfur, chlorine, lubricity and wetting agents plus highly refined base oil stocks. It is a versatile, multi-purpose and heavy-duty cutting oil especially effective for thread cutting and tapping operations of most types of steel. This oil also acts as a rust preventative on machined metals. 20 oz. Aerosol Can/ 16 oz Net Wt. |
|
US1, US2 & US3
Transor Filter has achieved a high level of recognition as a leader in EDM filtration. Working with builders and end users we have had significant exposure to various oils and how they affect performance. Through this experience, the family of US dielectric fluids came into being.
Irvin Kaage, Transor Filter USA President:
"Our primary business is filtration, but because we are filtering oil you can't help but accumulate information over the years that makes a person knowledgeable about oils. We took this information and formulated a dielectric that works extremely well in the EDM process and our ONE MICRON filtration system. Most important is that it is available at an affordable price. A major aerospace company employing over 100 EDM was using many different oils and wanted to standardize. We were working with them on a filtration project and suggested they try US dielectric. To our surprise, they chose US-1 as the preferred product for performance and value."
Whether you EDM small parts or large forging dies, US-1 is a product you can rely on. |
|
Molykote® synthetic oils are produced
through chemical synthesis to meet
targeted performance specifications and
to minimize impurities. Synthetic oils
are formulated with new generation
performance-enhancing additives.
Molykote mineral oils are produced in
a series of proprietary hydroprocessing
steps, which ensures that they are nearly
free of contaminants. Synthetic blends are
comprised of synthetic and hydroprocessed
mineral oil base stocks.
All oils in this section are available in pails
and drums.
Molykote® gearbox lubricants help prevent wear and process interruptions in power transmission
systems and components. Compared to conventional oils they also offer greater resistance to
oxidation and stable performance at high temperatures and under high loads. Molykote gearbox oils
maximize fill intervals and maintain viscosity characteristics at wide temperature ranges. Molykote
gearbox oils meet AGMA 9005-E02. In addition to AGMA, Molykote L-21XX series gearbox oils also
meet DIN 51 517 Part 3, US Steel 224, Flender, Cincinnati Machine, David Brown SL.53.101. |
|
Castrol gear oils range from lightly loaded to heavy shock loaded applications.
From conventional sulphur-phosphorus to high performance products, Castrol gear oils are for all applications. |
|
| Lubra-Gel is a high-pressure penetrating lubricant that dispenses as a penetrating oil, and then sets up as a grease-like lubricant. It contains Teflon® (a DuPont registered trademark) for excellent lubricating abilities. This product will penetrate hard to reach areas, then remain as an excellent high-impact, anti-splatter lubricant. The solvent evaporation is designed to provide this needed penetration. After penetration, the product becomes a viscous, high-impact grease that will withstand heat up to 600 degrees F. Constant temperature and pressure will break down any grease, leaving the surface unprotected until re-lubricated. Between lubrication periods, Lubra Gel provides a protective Teflon coating that ensures that the surface is never unprotected. This makes Lubra Gel the most dependable lubricant available for a complete maintenance program. It is also excellent for use on open gears, cables, chains, and sprockets. 16 oz Can / 11 oz Net Wt. |
|
| This spray lube is a non-soap, high temperature grease with excellent dispensing properties. It is a liquid when dispensed from the can, but once the solvent evaporates, it quickly sets up as a viscous grease that will withstand temperatures up to 500 degrees F. It is a non-soap synthetic grease base stock with antioxidant and anti-rust additives designed for continuous operation at high temperatures. It is specially designed for applications where the service range of conventional greases may be exceeded or cycling from normal to extremely high temperatures may occur. It has a good adhesion to metal and excellent resistance to water wash-off. Additionally, it is excellent for bearing lubrication. Ideal for hard to reach areas on conveyors, couplings, hinges, open gears and chain drives. 20 oz. Aerosol Can / 16 oz Net Wt. |
|
Molykote® dispersions are finely dispersed
solids or other lubricants suspended in
lubricating fluids. They are preferred where
it is necessary to apply solid lubricants in
liquid form to units in operation or to
otherwise inaccessible points. Some
dispersions serve as antiwear and extreme
pressure additives for lubricating oils like
gear and engine oils. |
|
Dow Corning® silicone compounds are
grease-like lubricants containing silicone
fluids and inert silica fillers. They are
resistant to oxidation and thermal
degradation while maintaining their
properties over a wide temperature range.
They are designed as release agents and
may be used as O-ring assembly lubricants,
non-conductors of electricity, non-curing
sealants and as assembly lubricants for
plastic and rubber parts.
Silicone compounds
may be used for applications
where they function in a dual role as both
lubricant and sealant.Molykote silicone greases contain polymeric silicone fluids as the base oil
Silicone greases operate over a wide range of temperatures, even at very low temperatures
Molykote offers heavy duty silicone greases with outstanding corrosion protection (500 h salt spray test)
Silicone greases are compatible with most plastics and elastomers
Silicone greases exhibit high water resistance and thus no water wash-out
High oxidation resistance combined with low evaporation rates make silicone greases very suitable for long term lubrication
High drop point, hence no risk of melting and running-out
|
|
Lubricating for insert
200 ml
APPLICATION
PACKAGING
Box or bag: -
Carton: 24 pz
COLOR ITEM
N001 |
|
On a synthetic or mineral base, a range of engine oils with a wide selection of viscosity and which meets the latest specifications (ACEA, API) as well as the most recent manufacturers' requirements.
|
|
Nonflammable CO2 propellant
Displaces moisture
High flash point of 175° F (79° C)
More usable contents per can
Protects against corrosion
Loosens rusted or frozen parts
Excellent protective coating for power/hand tools
Does not contain CFCs, chlorinated solvents or
silicones
Authorized by the USDA for use in federally
inspected meat and poultry plants
Nonconductive
Safe on fabric, plastic, rubber, paint and other finishes
Plant Engineering 1995 Product of the Year
Inverta Spray Valve lets you spray in all directions |
|
Colorless, thin film
Excellent for releasing molded parts
in high temperatures or pressures
Low odor
Nonstaining
Nonflammable
Noncorrosive
Does not contain CFCs, or chlorinated solvents
|
|
Our whole oils, formulated on highly refined mineral basis, bases synthetic or bases vegetable, integrate a rigorous selection of additives (extreme-pressure, antiusure, antioxydant, fog).
They allow all the operations of machining: correction, turning, milling, drilling, boring, stitching,..., on all types of metals: cast iron, steel, titanium, nickel, aluminum, copper,... |
|
| Fuchs Lubrifiant France proposes a lubricants range specific to the operations of cold deformation of metals: cutting, stamping, shaping, swifting, hydrospinning, striking... |
|
|
|
