|
|
Colorless, thin film
Excellent for releasing molded parts
in high temperatures or pressures
Low odor
Nonstaining
Nonflammable
Noncorrosive
Does not contain CFCs, or chlorinated solvents
|
|
Our whole oils, formulated on highly refined mineral basis, bases synthetic or bases vegetable, integrate a rigorous selection of additives (extreme-pressure, antiusure, antioxydant, fog).
They allow all the operations of machining: correction, turning, milling, drilling, boring, stitching,..., on all types of metals: cast iron, steel, titanium, nickel, aluminum, copper,...
|
|
PLANTOCUT 7F a biodegradable cutting oil, without chlorine. It is appropriate in particular for the operations of machining with frictions tools parts very
important by reducing the wear of the cutting tools. PLANTOCUT 7 F are especially recommended for the operations of tapping and drilling in
outside.
Compatible all metals.
Ecological engine not diffusing dansl' atmosphere.
|
|
|
Fuchs Lubrifiant France proposes a lubricants range specific to the operations of cold deformation of metals: cutting, stamping, shaping, swifting, hydrospinning, striking...
|
|
Our water-soluble oils, free from formaldehyde, are declined in the form of true emulsions, microémulsions and solutions. They were developed to satisfy the requirements of the most recent machine tools, whatever the water quality of dilution (fresh water or lasts).
Our products allow all the operations of machining: correction, turning, milling, drilling, boring, stitching,..., on all types of metals: cast iron, steel, titanium, nickel, aluminum, copper,...
|
|
Armed with its experience in the field of maintenance, Motul today possesses a complete range of lubricants
Conscious of the fact that lubrication of machines is a determinant factor for industry, Motul always has a ready ear for the requirements and needs of the market and of its customers.
To serve you better, Motul offers you, as well as its range of product, complete technical assistance for maintenance, from recommendation to after-sales service, via the putting into service of our products ...
|
|
Armed with its experience in the field of maintenance, Motul today possesses a complete range of lubricants
Conscious of the fact that lubrication of machines is a determinant factor for industry, Motul always has a ready ear for the requirements and needs of the market and of its customers.
To serve you better, Motul offers you, as well as its range of product, complete technical assistance for maintenance, from recommendation to after-sales service, via the putting into service of our products ...
|
|
Description
- High performance mineral oil-based metalworking oils.
- Heavy duty versions available for deep hole drilling, broaching, stamping, etc.
- Available in a variety of performance formulations utilizing extreme pressure and/or polaric lubricity additives with or without chlorine.
Applications/Properties
- Universal for machining and grinding of almost all materials.
- Perfect for job-shop screw machine shops.
- Especially suited for CNC machinery including Swiss-automatic lathes.
|
|
Multi-functions Ultra
Five functions in one : fights off humidity and corrosion, lubricates, cleans and frees rust
Resist the extreme temperatures (- 40°C +200°C).
Net volume: 500 ml
|
|
|
The products in the ThreeBond 6100 series are rust-inhibiting paints for automobiles. The series includes paints suitable for wheel wells, underbodies, and brake calipers. A waterbased, environmentally friendly type is available.
|
|
Armed with its experience in the field of maintenance, Motul today possesses a complete range of lubricants
Conscious of the fact that lubrication of machines is a determinant factor for industry, Motul always has a ready ear for the requirements and needs of the market and of its customers.
To serve you better, Motul offers you, as well as its range of product, complete technical assistance for maintenance, from recommendation to after-sales service, via the putting into service of our products ...
|
|
Description
- Ultimate performance straight oils based on natural (vegetable oil) esters.
- Added level of safety from very high flash point and very low mist/vapor formation.
- Greatly reduced consumption as compared to similar viscosity mineral oils.
- Available with or without chlorinated additives.
Applications/Properties
- Universal for machining and grinding of almost all materials.
- Ideal for high productions shops machining titanium, stainless steels, high temp alloys and other difficult to machine materials.
|
|
|
|
|
|
Mobilgrease 28 is a supreme performance, wide-temperature, antiwear grease designed to combine the unique features of a polyalphaolefin (PAO) synthetic base fluid with an organo-clay (non-soap) thickener. Its consistency is between an NLGI No. 1 and No. 2 grease. It offers outstanding performance over a wide temperature range. The wax-free nature of the synthetic base fluid, together with its low coefficient of traction compared with mineral oils, provide excellent low temperature pumpability, very low starting and running torque, and can reduce operating temperatures in the load zone of rolling element bearings.
The clay thickener gives Mobilgrease 28 a high dropping point value of around 300ºC, which provides excellent stability at high temperatures. Mobilgrease 28 resists water washing, provides superior load-carrying ability, reduces frictional drag, and prevents excessive wear. Tests show that Mobilgrease 28 lubricates effectively rolling element bearings under conditions of high speeds and temperatures. Mobilgrease 28 has also shown superior ability to lubricate heavily loaded sliding mechanisms, such as wing flap screw jacks.
For more than 30 years, Mobilgrease 28 has been the multi-purpose grease of choice for military and related aviation applications, worldwide.
|
|
Socony Oven Conveyer Lubricant is a high performance product designed specifically for the lubrication of oven conveyor chains at temperatures up to 200 degrees celsius. It is formulated from a low viscosity oil and colloidal graphite. The oil acts as a carrier for the graphite and can penetrate between the moving parts. The oil is sufficiently volatile at the working temperature to evaporate without leaving residues that might cause sticking.
Socony Oven Conveyor Lubricant is best applied at a low temperature point to allow the fluid to penetrate between the links and pins. As the conveyor moves into a hot zone the carrier evaporates, leaving a lubricating film of graphite. The lubricant may be applied manually by brush or some form of centralised mechanical system.
|
|
|
|
|
|
Mobil EAL Arctic Series are high performance Environmental Awareness Lubricants (EAL) that are fully synthetic products designed specifically for the lubrication of refrigeration compressors and systems, using ozone-friendly HFC refrigerants. (HFCs are chlorine-free products replacing chlorine-containing refrigerants in the world market). Mobil EAL Arctic Series oils are formulated from proprietary synthesised polyol esters (POEs) and a unique additive system to provide outstanding lubricity, wear protection, chemical and thermal stability, and hydrolytic stability. They are miscible with HFC refrigerants and have well-defined viscosity/temperature/pressure relationships with widely used HFCs. The performance of the Mobil EAL Arctic Series has been well documented with HFCs in a broad range of refrigeration and air conditioning systems and are used by many major compressor and system builders around the world.
Mobil EAL Artic Series are available in ISO Viscosity grades 15 to 220. They are recommended for use in household and commercial refrigeration and air conditioning systems where HFC refrigerants are used.
|
|
|
|
|
|
The Humble Hydraulic H Series oils are quality anti-wear hydraulic oils designed to meet the requirements of most fluid power systems. They exhibit good anti-wear properties that help reduce the wear rates in gear, vane and piston pumps. They also possess a high level of resistance to oxidation and thermal degradation that helps control the formation of system deposits. The Humble Hydraulic H line also has good water separation properties, rust and corrosion prevention, and foam resistance. They are formulated with high quality base oils and a performance additive system.
Features and Benefits
The Humble Hydraulic H Series oils provide good anti-wear protection reducing wear in pumps and actuators in open or closed-loop systems. Their high resistance to oxidation and thermal degradation helps reduce the formation of deposits and varnish. The Humble Hydraulic H Series offers the following benefits:
Good anti-wear protection improves pump life
High resistance to oxidation eliminates deposit formation and improves oil life
Good water separation properties allow easy removal of water from systems reducing potential damage to system components
|
|
|
Ongoing research and a 90-year legacy of working with leading equipment builders help ExxonMobil Marine Lubricants develop products that continually meet customer needs. With a complete line of mineral and synthetic lubricants, we offer the products your fleet's engines and equipment need to perform reliably and operate efficiently. Our flagship product line for both two- and four-stroke diesel marine engines, Mobilgard, has been shown time and again in proof-of-performance trials. Also, we offer synthetic lubricants to help improve performance benefits and economic advantages for marine equipment operating at higher temperatures and under more stress.
|
|
KUTWELL is the trademark for a line of two high-performance 'soluble' cutting fluids for cooling and lubricating the tool and work in machining operations. The line includes one petroleum-base fluid, KUTWELL 40, and one semi-synthetic fluid, KUTWELL 82.
KUTWELL products mix readily into water to form stable emulsions. They have excellent rust-preventive properties, both are inhibited against foaming, and both are versatile products suitable for a wide range of metal cutting and grinding operations. KUTWELL products effectively remove heat from the work piece and can be applied as a stream or in mist form.
In many cases, the proper KUTWELL grade can replace straight mineral cutting oils, and a single grade may often serve all the machine tools in a plant.
|
|
|
|
|
|
Mobil Gas Compressor Oil is a premium quality, high performance, synthetic gas compressor lubricant based on poly-alkylene glycol. It is primarily intended for use in gas compressors for hydrocarbon and chemical gases where the crankcases and bearings operate in a gas filled atmosphere. It is particularly suitable for marine service on vessels carrying liquefied gas cargoes. It also has application in general industry where problems with oil and gas solubility issues have resulted in less than satisfactory equipment performance. Compared with conventional mineral oil, Mobil Gas Compressor Oil has a lower gas solubility and consequently resists dilution and has improved viscosity control which results in additional protection against wear, improved efficiency and reduced foaming.
Features and Benefits
Mobil Gas Compressor Oil is a special purpose synthetic product developed to reduce the problems resulting from gas dissolving in the lubricant and causing problems with wear, sealing, increased maintenance and frequent oil changes.
|
|
|
|
|
|
Mobil Mist Lube Series are extra high performance oils designed for the oil-fog or mist-lubrication of machine components such as slideways, bearings, gears, chains etc. They are formulated from high quality, solvent refined base stocks and a unique additive system designed for optimum reclassifying properties. They have a high resistance to oxidation and good extreme pressure and anti-wear properties. The products have enhanced surface wetting capabilities and they reclassify (or agglomerate) readily from a mist to a liquid when the mist is subjected to extreme turbulence or is impinged onto a surface at high velocity. This allows a lubricating film to form on bearings and gears and prevents stray mist from escaping through narrow apertures into the atmosphere.
The four viscosity grades in the Mobil Mist Lube Series, ranging from ISO VG 32 to 460, allow the machine designer to choose the product most suitable for proper mist lubrication of machine elements. The heavier grades are used on ways, gears, and slow-speed, heavily loaded bearings, while the lower viscosity grades are used in high-speed bearings.
|
|
Molykote® Anti-Friction Coatings (A-F
Coatings) are paint-like products. They
contain, instead of a coloring pigment,
submicron sized particles of solid lubricants
dispersed through carefully selected resin
blends and solvents. Important for the
lubricating and corrosion protection
properties are the choice of the right raw
materials and the volume concentration of
the lubricant content. In addition to greases
and oils, or where possible, as replacement
of those hydrodynamic lubricants, Molykote
A-F Coatings form a lubricating film, which
helps cover surface roughness and thus
protects against surface to surface friction
(e.g. metal to metal, plastic to metal,
plastic to plastic) even under extreme
loads. They are applied by conventional
painting techniques: e.g. spraying, dipspinning
or brushing.
|
|
|
|
|
|
SKF bearing greases:
The perfect solution for every application
SKF's vast experience in the development of rolling bearings forms the basis for the development of a special range of lubricants, the superior quality of which is obtained through continuous testing and studies.
LGMT 2: SKF general purpose industrial and automotive bearing grease
LGMT 3: SKF general purpose industrial and automotive bearing grease
LGWA 2: SKF high load, extreme pressure, wide temperature range bearing grease
LGFP 2: SKF food compatible bearing grease
LGEP 2: SKF high load, extreme pressure (EP) bearing grease
LGEM 2: SKF High viscosity bearing grease with solid lubricants
LGEV 2: SKF Extremely high viscosity bearing grease with solid lubricants
LGLT 2: SKF low temperature, extremely high speed bearing grease
LGGB 2: SKF green biodegradable bearing grease
LGWM 1: SKF extreme pressure low temperature bearing grease
LGHB 2: SKF high load, high temperature, high viscosity bearing grease
LGHP 2: SKF high performance, high temperature bearing grease
LGET 2: SKF extreme temperature, extreme condition bearing grease
|
|
Poor lubrication is one of the leading causes of bearing damage. Building on extensive tribological bearing design and manufacturing knowledge, Timken has developed a proprietary line of industrial lubricants that help keep bearings and related components operating efficiently in a variety of environments. High-temperature, anti-wear and water-resistant additives offer additional protection in challenging conditions.
Timken offers G-Power and M-Power single-point lubricators. These gas and motorized units lubricate bearings, chains, guideways and other equipment, helping to improve productivity and reduce maintenance costs.
|
|
Molykote® chain lubricants help prevent wear and process interruptions in power transmission
systems and components. Compared to conventional oils they also offer greater resistance to
oxidation and stable performance at high temperatures and under high loads. Molykote gearbox oils
maximize fill intervals and maintain viscosity characteristics at wide temperature ranges.
|
|
Synthetic oil with modern EP-additives and anti-oxidants for high temperatures. APPLICATION: Chain lubrication up to 250 °C. Branches: Chemical industry, foundries, breweries, in wood, textile, automobile, chip-board, rubber, glass, insulating material and metal processing industries. Machines: Drying and shrinking ovens, paint shops, coating and conveyor systems, stenter frames and double belt presses.
Advantages:
* Excellent wear protection with low friction rates
* Adherent additives avoid drop-off and spin-off
* Outstanding creeping and penetrating properties
* Chemical stable and ageing resistant
* No lacquers; evaporates at high temperatures with nearly no residues
* Excellent corrosion protection
|
|
Adhesive Chain Lubricant
Ref: ACL400
Highly tenacious
Excellent resistance to water and high temperatures
Good mechanical stability
Good penetration at low temperatures
|
|
|
|
|
|
* Extends switch life
* Improves signal quality
* Reduces operating temperature
* Controls switch ‘feel'
* Prevents contamination
* Silicone free
Contact lubricants increase the reliability and lifetime of all current carrying metal interfaces. These include switches, connectors and busbars.
Electrolube have been the leading supplier of contact lubricants since their invention by the founder in the 1950's.
A wide range of products are available covering all common applications, whilst a program of continual development provides speciality products for ever changing customer needs.
Manufactured as tenacious greases and oils, products are available for consistent operation at extremes of temperature and with sensitive plastics that are normally attacked by traditional lubricants.
The use of a suitable contact lubricant will solve the problems of wear, poor signal quality, inconsistent operation and allow the use of less expensive materials. The choice of lubricant can also allow the ‘feel' characteristics of the switch to be optimised.
|
|
Ultra Slick lubricant is a GC/LB grease designed for wheel bearing and general chassis lubrication. Product can be applied directly as a grease or sprayed on using an aerosol formulation. This high quality product can be used on any moving parts to provide better, longer lasting lubrication that withstands higher temperatures and
is safe on more surfaces. It withstands temperatures from -45°F to 350°F (-42°C to 177°C), 450°F (232°C) intermittent.
Aerosol - Level 3*
|
|
Accu-Lube offers a complete line of natural-based lubricants along withspecially-developed, patented micro-lubrication systems. The Accu-Lube System offers an innovative lubrication system that can be used on all major workshop processes, such as: Circular & Band Sawing, Turning, Milling, Drilling, Tapping, Reaming and Forming.
Accu-Lube represents the very latest technology ensuring:
- Improved productivity
- Reduced operating costs
- Safer working conditions
- Cleaner machine operations
- No waste disposal
- Eliminates cutting fluid
- Environmentally considerate
|
|
|
|
