|
|
- Model HS-24
- Sanding speed 1000RPM
- Abrasive belt size 158"x4"
- Table area 48"x24"
- Table height from floor 830mm
- Motor 3hp |
|
2FSM 2" Sander Multi-position vertical or horizontal
2" x 48" belt, Vertical or Horizontal Position.
1/2 HP motor, 3450 RPM, direct drive, 5" contact wheel
Tilt work table, removeable platen
Full hinged OSHA guard for quick belt change.
Pre-set belt tension, one knob belt tracking.
4500 SFPM belt speed, WT. 48 lbs.
Model: 2FSM
Other products available: |
|
Developed from the well proven belt sanding machines for woodworking in outmost robust and long
lasting construction especially for the hard requirements in the metal working.
Special machines on request. |
|
S6MS, 6" belt sander
Industry standard. 3 HP !! Real workhorse !! Every shop needs one !! Also available in 5 HP and in 6" x 60" belt!
6" x 48" belt, variable positons, direct drive, 1 lever quick belt release !!!
Cast iron frame, Full OSHA safety guard, Heavy duty steel stand.
3 HP motor 3450 RPM, 1 phase or 3 phase, manual switch, 3500 SFPM
Reversible platen 6 1/2" x 14"
Cast iron work table 6" x 10" with 1/2" x 1/8" slot
Option: JIC controls
Model: S6 sander head only, less motor
Model: S6M-1 3hp, 1 phase, 220, LESS stand.
Model: S6M-3 sander, 3 hp, 3 phase, LESS stand
Model: S6MS-1 , 3 hp, 1 phase, 220 volt, w/Stand ( 110 volts @34amps)Model: S6MS-3, 3 hp, 3 phase, 220/440 volt, w/Stand
Model: S6MS-5 5 HP, 3 PH other features same as above.
Model: S660MS 6" x 60", 3 hp, other features same as above.
Other products available: |
|
S612 & S612V Combination Sander With Vacuum !! 3 HP !!! Made in USA!!! 6" x 48" belt, 12" Disc, Vacuum Base
Available with OR without dust collector. 3HP 1PH 220 OR 3HP 3PH 220/440 volt. ( Specify voltage) Manual switch with overload protection.
Built in 100 CFM dust colletor base with cartridge filter.
Quick change belt, pre-tensioned one lever belt change...FAST !!
Models:
# S612-1 No vacuum, 1 phase/220 volt
# S612-3 No vacuum, 3 phase 220 or 440 volt
# S612V-1 Vacuum base, 1 phase/220 volt
# S612V-3 Vacuum base, 3 phase 220 /440 volt
Dimensions: L12" x W14" x H60", Weight: 500 lbs.
Specifications:
Belt Sander
Work Table- Cast iron 6" x 10" with 1/2" x 1/8" slot
Platen- Steel 6-1/2" x 14"
Belt- 6" x 48" - 2800 SFPM
Disc Sander
Work table- Cast Iron 8" x 14"
Disc- 12" aluminum disc, 5/8" arbor Speed- 2500 RPM
Other products available:
|
|
DS10 10" disc sander
Heavy-duty, all steel
Tilt table, 45 degrees down - 15 degrees up
Optional: MG10 mitre gauge
10" aluminum disc
5/8" arbor
6" x 11" table
1/2 HP (110/220V), 1 PH TEFC motor
48 lbs.
Model: DS10
Other products available: |
|
- Disc Sander and Random Orbital Sander Combination
- 12,000 RPM Dynalocke® is truly "two tools in one", easily changing from a rotary Disc Sander to Random Orbital Sander with the flip of a switch
- Includes low profile, premium urethane sanding pad
- Very lightweight with ultra-smooth sanding performance
- Ideal for paint stripping and blending |
|
Nitto Kohki´s "BELTON" Pneumatic Sander:
- Suitable for sanding jobs in narrow spaces, recessed corners or on
curved surfaces
- 5 models available
- rated air pressure: 6 bar
- free speed: between 14.000 and 17.000 rpm
- belt speed: between 1.000 m/min and 2500 m/min
- mass (weight): between 0,6 kg and 2,9 ,kg |
|
S14HW, 14" Wet Horizontal Belt Sander
Also available DRY !
Great for getting parts FLAT !!
14" x 103" belt
3400 SFPM
Steel platen 14-1/2" x 36"
Work surface 14" x 32"
Air tension on belt, 0-55 PSI reqd.
20 HP, 3 PH TEFC
Mag controls with jog, 24 volts at pushbutton
L 64" x W 31" x H 35"
Wt: 1900 lbs
Model: S14HW, 14"x 103", 20 hp.,220/440/60hz 3 ph. 24 volt at switch.
10 gal. coolant tank & pump.
Model: S14HD, as above, less coolant tank & pump.
Other products available:
|
|
Dynorbital-Spirit Random Orbital Sanders
- Ideal for achieving a swirl-free finish on paint and other surfaces
- Lightweight (0.64 kg) - makes it ideal for vertical applications
- Includes low-profile, premium urethane, weight-mated hook-face sanding pad
- Innovative "V-seal" bearing seal protects balancer shaft bearing from sanding residue for longer life
- Different Vacuum Style: Non-Vacuum, Central Vacuum-Ready or Self-Generated Vacuum-Ready
- Different Pad Diametres: 89 mm (3-1/2"), 127 mm (5") or 152 mm (6")
|
|
Dynorbital Supreme
- Unique rotor utilises 5 blades and produces more useable power
- The air motor is suspended by vibration-absorbing rubber rings to minimize vibration
- Triple-sealed balancer bearing
- Anti-clog Vacuum Design
- Different Vacuum Style: Non-Vacuum, Central Vacuum-Ready or Self-Generated Vacuum-Ready
- Different Pad Diametres: 89 mm (3-1/2"), 127 mm (5") or 152 mm (6")
|
|
Right Angle Mini-Orbital Sander
- Ideal for spot repair on gelcoat and clearcoat paint systems, plus finesse sanding of small areas
- 3 mm (1/8") orbital action minimizes swirl-marks. Tool can be used for both dry and wet applications
- Tool includes a 32mm (1-1/2") diametre rubber sanding pad. Optional 19 mm (3/4") diametre rubber pad
- Uses a powerful 0.4HP (298W) air motor for efficient and quick removal of dust nibs and defects
- Lightweight and easy to use, the perfect combination between power and comfort
- Front exhaust allows continuous cooling of gear box which extends the life of the tool
- Also includes 95848 Gear oil and 95541 Push-Type Gun, for lubrification through unique "dual wick" system
|
|
Sanders
The sanders are available in various models, suitable for metal finishing and woodworking applications.
Belt sanders
The Red Rooster belt sanders are suitable for nearly all materials, e.g. steel, aluminium, plastics and wood and for use as a de-burring method
in difficult access fettling applications. All belt sanders are executed with safety handle and adjustable silencer. |
|
Grinders
Baldor's industrial quality, single and three phase, bench and pedestal grinders are available having wheel diameters of from 6 to 14 inches. This well known line also includes diamond wheel and carbide tool grinders and abrasive belt grinders. Some designs of the abrasive belt grinders are supplied with a three position tiltable belt. All these grinder products are backed by a three-year warranty. |
|
SXE 450 TurboTec
Multi-purpose machine for sanding even and cambered surfaces, wood, plastics, non-ferrous metals, sheet steel
Rotating and additional oscillation movement of backing pad for optimum finish and high material removal
Variospeed (V) electronics for infinitely variable speed change
Thumbwheel for preselection of speed
TurboBoost switch: allows additional power reserves to be employed for achieving maximum removal
No scratches while placing the running machine on the material owing to the built-in support plate brake (Power Control System). No more time-consuming finishing work due to scratches. Ideal for sanding very thin material (e.g. veneered surfaces) and sensitive areas.
One-of-a-kind ‘Duo’ oscillating circuit; setting 1: (small oscillating circuit) up to 100% higher surface smoothness; setting 2: (large oscillating circuit) up to 70% increase in removal power
Removable side handle
Dust-proof ball bearing for long service life of the machine
Sturdy aluminum die cast bearing housing
Quick sheet change by velcro-faced backing pad
Vibration damping, non-slip rubber support on the machine housing and the handle
Dust extraction unit with Intec filter system, multiple cleaning
External extraction possible: a vacuum cleaner can be connected |
|
4151-HL - Random Orbital Sander
- 0.16 kW - 12 000 rpm
- 5 mm orbit, 152 mm sanding pad
- composite housing, 0.87 kg only
- vaccum-ready and lubrication-free operation
- available with 2.5 mm orbit and 152 mm pad (4152-HL model) |
|
Surface grinding and polishing operations of various grit require a virtually unlimited number of combinations of rotational speeds and fittings for accessories. Atlas Copco provides a wide and competitive range of angle sanders with roatational speeds, from the finest polishing operation to coarse grit sanding.
|
|
SPL series
OKAMOTO is the world-wide only offerer of abrasiver complete solutions, also in the range honing-lapping and polishing. |
|
- Fein sanders paired with a Fein dust extractor can help you protect the environment, keep the workplace clean, and make EPA compliance automatic.
- Dust-free sanding is faster and creates a better finish because the sandpaper rides directly on the work instead of
on a bed of dust.
- Fein Sanders are powerful and durable with a metal gear head and fiberglass reinforced polyamide motor housing.
- Dust-free sanding means quicker job preparation and eliminates 90% of clean up. |
|
It is composed by 2 MANIPULATORS our mod.MINIROBOT:
- Self-teaching programming .
- 5 Axes with simple interpolation; the fifth axis has a continuos rotation.
- In front of the MINIROBOT MANIPULATORS are positioned two working units that can be GRINDING or POLISHING units. |
|
- Compact size and lightweight. Unique pad has curved edges for sanding rounded areas, and pointed tip for reaching into tight corners.
- Powerful, efficient air motor has low vibration levels to reduce hand and arm fatigue.
- Central Vacuum Style: Includes 56323 "Delta Style" Vacuum Sanding Pad, 99mm wide (at wider end) x 143 mm long, with seven vacuum holes.
|
|
Acme offers a wide range of traditional machinery for buffing and polishing applications:
Universal Straight Line Conveyors
- Tangent and wide wheel buffing heads
- Conveyors up to 130' long
- High volume part production
Indexing and Continuous Rotary Machines
- Indexing machines from 2 to 16 stations
Standard Buffing and Polishing Heads
All conventional Acme equipment includes:
- Smart screen operator consoles
- PLC electrical panels
- Remote troubleshooting via modem connection
- Automatic wheel wear compensation
- Liquid and bar compound systems
- Acme's rigid machinery designs for reliability, maintainability & durability |
|
| ... products without technical information |
| |
|
|
