|
|
Model: ECO 2000
Heavy - Duty, Medium/Large Size Grinder
Grinder recommended for: Heavy - Duty, Medium and Large Size materials
Installed Powers (KW):160 / 200 / 250
Drive: Mechanical or Oil - Hydraulic
Machine dimensions:
-Length:2200
-Width:5400
-Height:2380
Hopper dimensions:
-Length 1300mm
-Width 2000mm
Rotor diameter: 600mm
Weight: 22000 Kg
Possibility to apply:
-unloading belt conveyors
-metal and non metal selecting system
-screen for the calibration of outlet material
|
|
Universal Industrial Grinder (2nd hand)
Model: ECO/M 2000
Drive: Mechanical
Installed Power:KW200
Machine in VERY good conditions UNDER POWER!!!
Rotor Diameter: 600mm
Dimensioni Tramoggia:
-Lenth: 1300mm
-Width: 2000mm
Weight: 22000 Kg
Possibility to apply (optionals):
- unloading belt conveyors
- metal and non metal selecting system
- screen for the calibration of outlet material.
|
|
Model: TOP CUT HYDRO 2600
Heavy–duty grinder suitable for: large quantities and very Large size materials
Installed Powers (KW): 200/250/315
Drive: Mechanical or Oil - Hydraulic
Rotor diameter: 600mm
Hopper dimensions:
-Length 1300mm
-Width 2600mm
Weight: 24000 Kg
Possibility to implement:
- unloading belt conveyors
- ferrous and non ferrous separation systems
- different grid weft sizes for the calibration of the outlet material
|
|
The mortar grinder RM 200 comminutes inorganic and organic substances to analytical fineness. It can mix and homogenize powders, suspensions and pastes. The grinder is also ideal for the uniform trituration of homeopathic and pharmaceutical products.
Product Advantages:
loss-free processing
wet and dry grinding
7 different grinding set materials for contaminationfree grinding
reproducible results by adjustment of the pestle pressure (via a scale) and digital time setting
performance display
closed, dust-tight grinding chamber with windows
high-performance drive with electronic control
easy to operate, easy to clean
safe, CE-conforming design
2 year warranty
|
|
With the proven use of gearless drive technology, the limitation of AG/ SAG mill size due to gearing constraints has been eliminated. Metso Minerals is the world's leading supplier of gearless AG/SAG mills.
The experience gained from installation and operation of these mills enables us to offer mills of up to 35,000 installed horsepower or more.
Today a single grinding line with a Gearless SAG mill and appropriate ball mills can process over 100,000 mtph.
Gearless AG/SAG Mills
Gearless drives (ringmotors) have been used on tumbling mills for several decades. The design features motor rotor elements bolted to a mill shell,
a stationary stator assembly surrounds the rotor elements, and electronics covert the incoming current from 50/60 Hertz to about 1 Hertz. The mill
shell actually becomes the rotating element of a large low speed synchronous motor. Mill speed is varied by changing the frequency of the current to
the motor. The ringmotor can be used to inch and spot the mill for maintenance.
Our engineers welcome the opportunity to assist you with circuit and circuit control design as well as start-up, operation, and optimization of the milling plant.
|
|
|
The FRITSCH Mortar Grinder is an all purpose mill suitable for a wide range of materials: hard-brittle to soft-wet and the popular choice in the chemical/pharmaceutical area. Its gentle grinding through pressure and friction makes it the ideal mill for grinding tablets in galenics.
|
|
NETZSCH M-Ovas® grinding systems can be used wherever it is essential that solid matter in fluids be broken down reliably to ensure the prevention of pipe clogging and damage to downstream equipment.
The special design of the M-Ovas® housing carries the solids in the wastewater flow to the cutting plate, where they are held and chopped by rotating blades. This low-maintenance assembly is designed for sludges with a maximum flow of 300 m3/h and a dry matter content of up to 7%.
Advantages of the NETZSCH M-Ovas®:
- high operating safety due to robust construction
- ease of operation and simple maintenance
- low operating costs through high operating efficiency
- optimal price/performance ratio
The NETZSCH M-Ovas® is primarily used in the following areas:
- Wastewater treatment
- Agriculture
- Slaughterhouses and recycling plants
- Canning/tinning factories
- Sugar factories
- Industrial kitchens
|
|
Rotoplex large scale granulators are characterized by their extraordinary performance capacity, economy, and operating reliability. The Rotoplex features a cross-scissor-cut rotor which offers process technological superiority, saves energy, increases the service life, and improves the material feeding characteristics. Besides the classic field of plastics size reduction, Rotoplex large scale granulators are employed for all types of cuttable material- even those which cause a high degree of wear.
|
|
FEATURES:
- Works with grinders or shredders or to inspect finished parts.
- Find tramp in virgin plastics, rubber, and recycled materials.
- Protect against all conductive metals.
- Key in settings on the Tunnel Detector's LCD interface.
- Choose from a long list of options to fit your needs.
- Outfit the conveyor with floor supports and other accessories.
Grinder / Shredder Feed Conveyors let you catch both ferrous and nonferrous metal contaminants in recycled plastic before they damage equipment or ruin product. This dual-function unit can also be used for monitoring plastic parts. It combines an option-rich Bunting Conveyor with any of three optional metal detectors that sense all conductive metals and feature self-diagnostics for easy adjustment and reliable operation. All three available detectors have a triple-coil, high-frequency metal detection system with Product-Effect Compensation and EMI/RFI filter.
|
|
HSM office technology offers a large family of various document shredders, each one precisely tailored to a specific requirement. Whether for home offices, work offices, IT departments or professional document shredding. The only thing that never changes is the first-class quality of our high-end machines which are "Made in Germany".
|
|
|
General Purpose - HM Series Supermill - Designed primarily for discrete pass operation with medium to large grinding media size. This series is available in chamber sizes from 0.75 to 200 liters, with a capacity range from about 1.0 GPH to 900 GPH on average. The most economical mill selection offered by Premier, but has a limited range of applications related to the size of the grinding media required for processing. The HM Series can operate well over a wide viscosity range, and is generally used in 1 or 2 pass grinding applications with media size of 0.8mm or larger. There are various options to the HM including stationary front screen, and various materials of construction including plastics, ceramics and composites to suit particular applications. Standard type milling discs, or patented AP type high energy milling discs can be used to optimize mill performance. The basic HM design with Internal Rotating Screen has proven to be a "WORKHORSE" in general purpose media milling applications for over a quarter century
|
|
The Retsch high-speed Planetary Ball Mill PM 100 pulverizes and mixes soft, medium-hard and even extremely hard, brittle and fibrous materials. The PM 100 is a single-station unit suitable for jars from 12 ml to 500 ml. Both wet and dry grinding is possible. The Planetary Ball Mill can be used successfully in almost every field of industry and research, particularly where the requirements for purity, speed, reproducibility and fineness are very high.
The Planetary Ball Mill produce extremely high centrifugal forces with very high pulverization energies which results in short grinding times.
Product Advantages:
extreme speeds for particularly high final fineness
up to 50% higher energy input
grinding jar volumes from 12 ml to 500 ml
suitable for long-term trials and continuous use
safe and stable operation
reproducible results due to energy and speed control
10 combinations of grinding parameters can be stored
graphics display and ergonomic 1-button operation
automatic grinding chamber ventilation for grinding with solvents
2-year warranty, CE-conforming
|
|
The planetary ball mill PM 400 pulverizes and mixes soft, medium-hard to extremely hard, brittle and fibrous materials. Dry and wet grinding can be carried out. The high speed of 30 to 400 min-1 in combination with the very large sun wheel diameter of 300 mm guarantee extremely high fineness in a short time. With its powerful, maintenance-free drive the PM 400 is particularly suitable for long-term trials or – in the special version PM 400 MA-type – for mechanical alloying.
Product Advantages:
- extreme speeds for particularly high fineness down to submicron range
- 4 grinding stations for grinding 2, 4 or 8 samples simultaneously
- grinding jars with volumes from 12 ml to 500 ml, in 6 materials
- suitable for long-term trials and continuous use
- reproducible results due to energy and speed control
- direction reversal
- programmable starting time
- power failure backup ensures storage of remaining grinding time
- 1-button operation with graphic display
- 10 combinations of grinding parameters can be stored
- measurement of input energy helps to optimize grinding parameters
- automatic grinding chamber ventilation for cooling the grinding jars
- 2-year warranty, CE-conforming
|
|
The Premier Submersible Basket Type Media Mill is an exceptionally versatile dispersion system specifically engineered to allow batch and tank size flexibility.
• Independently controlled mixers and milling shaft provide:
-Uniform particle size.
-Consistent temperature control.
-Better flow control.
-Minimal operator interface.
• Capable of particle size reduction in a range of slurry applications.
• Easy clean-up.
|
|
Ball mills are used primary for single stage fine grinding, regrinding, and as the second stage in two stage grinding circuits
Grinding of materials in a tumbling mill with the presence of metallic balls or other media dates back to the late 1800's. Since that time, Metso
Minerals and its predecessor companies, MPSI, Sala, Marcy, Hardinge, Kennedy Van Saun (KVS), Denver Equipment, Allis Chalmers, Boliden
Allis, and Dominion Engineering, have designed and manufactured more than 8,000 grinding mills.
Metso overflow ball mill sizes range from 5 ft. x 8 ft. with 75 HP to 26 ft. x 41 ft. with 20,000 HP.
Normal feed size to a Metso Minerals ball mill is 80% passing 1/4" (6mm or finer) for hard ores and 80% passing 1" (25mm or finer) for soft ores.
Product size is typically 35 mesh or finer.
Operation
Ball mills operate either in open or closed circuit. Open circuit operation is best utilized when:
Another stage of grinding follows the mill
Reduction ratio is small
Feed material is already fine and one pass through the mill produces the desired results
Product size control is not critical and oversize material can be tolerated in the product
|
|
|
Ball mills are the most effective laboratory mills for batch-wise, rapid comminution of medium-hard to very hard samples down to the finest particle sizes. The grinding can take place dry or wet. Grinding sets of many different materials are available. The mills can also be used for mixing and homogenisation.
|
|
As extension of the existing classic line Planetary Mills, FRITSCH offers a completely new dimension of high-tech milling with the new FRITSCH premium line: The grinding bowls sunk into the disk enable for the first time to achieve revolutionary rotation speeds of up to 1100 rpm at acceleration 95 times that of gravity. The result: significantly shorter grinding times and the finest possible grinding results down to the nano range.
FASTER, SIMPLER AND SAFER THAN EVER.
- Revolutionary rotational speeds of up to 1100 rpm
- Ultrafine grinding results down into the nano range
- Finer grinding results in shorter time
- Sensational centrifugal accelerations of up to 95 times the force of gravity
- 150% greater energy application than conventional Planetary Mills
- For the first time, the bowl and lid form a single unit – no additional tensioning, no incorrect operation!
- Extremely easy grinding bowl change in a second with just two motions
- Grinding bowls position themselves and snap securely into place
- The bowl mountings rotate automatically into a convenient position for handling
- Automatic check of the locks in the mill
- Blockage in the event of impermissible operating states
- Automatic parameter check performed before every grinding, guarantees exact reproducibility
- Via USB, Bluetooth and Ethernet all data can be easily exported to save time
FRITSCH Planetary Mills premium line are ideally suited for loss-free grinding down to a fineness as small as 100 nm. The grinding can be performed dry, in suspension or in an inert gas as well as for mixing and homogenising emulsions and pastes or for mechanical activation and alloying.
|
|
Planetary ball mills are characterised by very fast and effective comminution. They have a wide range of applications. Ideal for lossless comminution down to extremely high levels of fineness < 0.1 µm. The grinding can take place dry, in suspension or under inert gas, depending on the application. They are also well suited for mixing and homogenising emulsions and pastes or for mechanical alloying in materials research.
As extension of the existing classic line Planetary Mills, FRITSCH offers a completely new dimension of high-tech milling with the new FRITSCH premium line: The grinding bowls sunk into the disk enable for the first time to achieve revolutionary rotation speeds of up to 1100 rpm at acceleration 95 times that of gravity. The result: significantly shorter grinding times and the finest possible grinding results down to the nano range.
|
|
Our shredders have been created for information security for your home and office.
In general we provide two types depending on the material: one for document only, and the other for paper, CD, etc.
Depending on the capacity, you offer large capacity and smaller capacity.
For more detailed information, please do not hesitate to contact one of our representatives.
|
|
The Alpine AHM is a universal, agitated ball mill with a horizontal cylindrical milling chamber for the continuous wet milling of particles up to finenesses in the sub-micron range. The AHM features a cylindrical milling chamber with cooling jacket and a modular design for product inlet, milling cylinder, and separation zone. The mill is easily accessible from all sides for cleaning and handling. Typical applications are chemicals, minerals, ceramics, metals, pigments, foodstuffs, and pharmaceuticals.
|
|
Mineral Processing
FGD - plant
Czechia
2x ball mill SBc280x625
wet process
discharge type: over flow
installed capacity 630 kW
mean size F80 7000 µ
mean size P80 22 µ
|
|
Available in Open Circuit And Close Circuit
Application : cement, bauxite, lime stone, Ore material or any type of minerals
Product Size : 200 mesh
Capacity : 1 - 10 ton per hour
Sub-drive by Heavy duty Pulley drive or Helical Gear Box drive
Sub-divided in to Liner Plates in Cast Steel, Mn. Steel, Cast iron or High Carbon Steel.
|
|
The mills of series 2000 have a modular design. Within the construction size the machines are convertible to the inline dispersing machines of series 2000.
Constant speed parameters and generator geometries allow an exact scale-up.
All machines are CIP- resp. SIP-suitable.
Design, materials and surfaces correspond to the recommendations of FDA resp. EHEDG.
There are different grinding tools available.
The drives can be adapted to the respective conditions like flow rate, power requirement, protection type or ex-protection.
|
|
The DYNO®-MILL KD is an agitator bead mill with horizontal grinding container. Specially designed agitator discs, mounted symmetrically on a shaft, transfer the energy required for dispersion and wet grinding to the spherical grinding beads. An external pump feeds the product into the mill. Separation systems are available in the form of static sieve with different apertures or as a dynamic gap separator with adjustable gap width.
Advantages:
- Completely enclosed system
- Highest efficiency
- Easy operation and adjustment of the operation parameters
- Optimal geometry of the grinding container and agitator discs
- The appropriate mill size for every application
- Different materials available for wear parts in contact with the product
- Low operation and maintenance costs
Applications:
- Varnish and Paint
- Printing inks
- Dyestuffs- and Pigment Dispersions
- Thermal and fax paper coating
- Fillers and Coatings
- Microbiology and Biochemistry
- Agrochemicals
- Microelectronics
- Ceramics
- Pharmaceutical and Cosmetics
- Food and Cocoa mass
|
|
.S.V.E. designs and manufactures shredding equipments such as single-shaft shredders, double-shaft shredders, four-shaft shredders, combined systems and granulator grinders customised to meet customer requirements.
Its plants have been widespread for years in all European and in many extraeuropean countries.
ISVE products come in 3 lines:
“Tritotutto” industrial shredders line are machines specifically made to shred both urban and industrial wastes such as plastic, paper, cardboard, wood and packagings, fruit shells, fruit stones hide scraps and leather, barks, cans, tyres, waste wood, etc.
Models range from the smallest and simple one (5,5 KW) to the model with a larger loading inlet and higher performance, with the installed power capacity up to 30 KW.
Please visit the “shredding demo videos” area of our website, to see this versatility.
“Combi” series: shredder with an in-line granulator, capable of producing final chips ranging between 12 and 4 mm suitable for shredding bulky plastic material, paper documents and wood.
Industrial single-shaft shredders with hydraulic pusher-drawer, complementary systems for double and four shafts shredders.
These machines complete the range of I.S.V.E precrushing system. Said machines are particularly suitable for shredding high specific weight elements such as plastic blocks, big pieces of wood, pallets, paper documents, extruded polymer pipes, etc
|
|
The new RETSCH Ultra-Centrifugal Mill ZM 200 is used for the rapid reduction in size of soft to mediumhard and fibrous materials. As a result of the effective pulverization technique and the wide range of accessories the ZM 200 ensures the gentle preparation of analytical samples in a very short time.
Product Advantages:
versatile in use due to wide range of accessories
high final fineness
wide speed range, adjustable from 6 000 to 18 000 min-1
considerably increased throughput due to optimally matched frequency converter and 3-phase motor
gentle and very rapid size reduction by 2-step rotor/screen system
quiet and reliable, easy to clean
comfortable parameter setting via display and ergonomic 1-button operation
comfortable safety housing with automatic cover closure
motor compartment and electronics protected against dust and material penetration
2-year warranty, safe design to CE standard
|
|
Retsch Cross Beater mills are suitable for batchwise and continuous coarse and fine grinding. Medium-hard and brittle materials with a hardness of up to 6 Mohs can be milled. Retsch Cross Beater Mills are highly versatile: from preparing samples in the laboratory and industrial plants, through pilot installations in technical colleges to making batches in the production.
Product Advantages:
high throughput
high final fineness
versatile in use
easily changeable bottom sieves
wide range of accessories
maintenance-free direct drive
safe design to CE standard
2-year warranty
|
|
|
