|
|
.S.V.E. designs and manufactures shredding equipments such as single-shaft shredders, double-shaft shredders, four-shaft shredders, combined systems and granulator grinders customised to meet customer requirements.
Its plants have been widespread for years in all European and in many extraeuropean countries.
ISVE products come in 3 lines:
“Tritotutto” industrial shredders line are machines specifically made to shred both urban and industrial wastes such as plastic, paper, cardboard, wood and packagings, fruit shells, fruit stones hide scraps and leather, barks, cans, tyres, waste wood, etc.
Models range from the smallest and simple one (5,5 KW) to the model with a larger loading inlet and higher performance, with the installed power capacity up to 30 KW.
Please visit the “shredding demo videos” area of our website, to see this versatility.
“Combi” series: shredder with an in-line granulator, capable of producing final chips ranging between 12 and 4 mm suitable for shredding bulky plastic material, paper documents and wood.
Industrial single-shaft shredders with hydraulic pusher-drawer, complementary systems for double and four shafts shredders.
These machines complete the range of I.S.V.E precrushing system. Said machines are particularly suitable for shredding high specific weight elements such as plastic blocks, big pieces of wood, pallets, paper documents, extruded polymer pipes, etc |
|
"M" SERIES SHREDDERS
Alongside the traditional 4-shafts equipped shredders, I.S.V.E. proposes a series of single-shaft equipped shredders with pusher-drawer.
These machines are purposely studied to shred thick materials and highly resistant to cut such as plastic blocks and sheets, various types of timber, paper, extruded polymer pipes, etc.
Operation drawings:
A pusher-drawer with hydraulic drive pushes the material towards a tools-holder roller which carries out the first breaking and thanks to its rotation and to the COUNTER-BLADE action makes a first breaking and the shredding of the product.
The product passes through a drilled screen, which allows establishing the final sizes of the material. |
|
| ... products without technical information |
| |
... see all the products in the category
Grinders
|
.S.V.E. designs and manufactures shredding equipments such as single-shaft shredders, double-shaft shredders, four-shaft shredders, combined systems and granulator grinders customised to meet customer requirements.
Its plants have been widespread for years in all European and in many extraeuropean countries.
ISVE products come in 3 lines:
“Tritotutto” industrial shredders line are machines specifically made to shred both urban and industrial wastes such as plastic, paper, cardboard, wood and packagings, fruit shells, fruit stones hide scraps and leather, barks, cans, tyres, waste wood, etc.
Models range from the smallest and simple one (5,5 KW) to the model with a larger loading inlet and higher performance, with the installed power capacity up to 30 KW.
Please visit the “shredding demo videos” area of our website, to see this versatility.
“Combi” series: shredder with an in-line granulator, capable of producing final chips ranging between 12 and 4 mm suitable for shredding bulky plastic material, paper documents and wood.
Industrial single-shaft shredders with hydraulic pusher-drawer, complementary systems for double and four shafts shredders.
These machines complete the range of I.S.V.E precrushing system. Said machines are particularly suitable for shredding high specific weight elements such as plastic blocks, big pieces of wood, pallets, paper documents, extruded polymer pipes, etc |
|
"M" SERIES SHREDDERS
Alongside the traditional 4-shafts equipped shredders, I.S.V.E. proposes a series of single-shaft equipped shredders with pusher-drawer.
These machines are purposely studied to shred thick materials and highly resistant to cut such as plastic blocks and sheets, various types of timber, paper, extruded polymer pipes, etc.
Operation drawings:
A pusher-drawer with hydraulic drive pushes the material towards a tools-holder roller which carries out the first breaking and thanks to its rotation and to the COUNTER-BLADE action makes a first breaking and the shredding of the product.
The product passes through a drilled screen, which allows establishing the final sizes of the material. |
|
| ... products without technical information |
| |
| ... products without technical information |
| |
This series of gear reducers with attached or integrated thrust bearing can be supplied in a helical or bevel helical gear arrangement. Quiet operation and strong design are key features. Horizontal or vertical mounting position, splash lubrication and cooling coil or injection lubrication are possible options. The modular design of the POSIREX is based on the POSIRED 2 range, plus a selection of available thrust-bearing parts.
Technical Data:
Torque (T2 nominal): 3,000 up to 800,000 Nm
Transmission Ratio: 4 up to 160 iN
Axial force: F = 50 up to 2,000 kN
|
|
New range of ultra-compact planetary and bevel helical gearboxes for industrial applications.
These new gear reducers, which are protected by a specific patent, feature a combination of planetary and helical/bevel helical gears that takes advantage of the strengths of each technology: compact size, reliability and easy maintenance.
This new series of lighter, more compact gear reducers surpass traditional solutions for planetary and bevel helical gear reducers and also ensure shorter production times and lower production costs.
The design of these ultra-compact gear units is based upon precise analyses using FEM (Finite Elements Method) techniques applied to 3D models, which means that performance, in terms of duration and silence, was optimized already in the virtual prototype phase.
Advanced engineering techniques, long experience and the use of high quality parts from Brevini Riduttori and PIV Drives led to the creation of a product that ensures high performance over time, a fact that has been confirmed by tests that simulate real operating conditions. |
|
The FHA-C series digital AC hollow-shaft servo actuator, combining precision Harmonic Drive gearing with highly dynamic AC servo motors, offer unique features unsurpassed by conventionally geared drives. Used in highly demanding industrial servo systems they provide precision motion control and high torque capacity in a very compact package. A HIPERFACE® or Siemens compatible encoder with sinusoidal output signals provides feedback information for the FHA Series Actuator with Sine/Cosine Encoder. The actuator is compatible with a wide variety of currently available digital servo drives for Sin/Cos motor feedback systems, e.g. Simodrive 611D/611U, SIMOVERT-MASTERDRIVES or NUM MDLU. Matching SC-610 digital servo control units, which can be used for current, speed or position control are also available.
Advantages:
- Backlash-free precision gear
- Hollow shaft from 18 mm to 45 mm
- Transmission accuracy < 60 arcsec
- Repeatability < ± 6 arcsec
- Sine-commutated AC hollow-shaft motor
- Motor winding for 320 VDC / 600 VDC
- Winding temperature monitoring via temperature sensor
- High capacity and high stiffness cross roller bearing
- Sine/cosine-encoder for use with SIMODRIVE 611D/U and SIMOVERT MASTERDRIVES MC
- HIPERFACE®- encoder for operation with Harmonic Drive® servo controller SC-610 or a variety of further servo controllers (NUM, CT, Danaher Motion, Elau, etc.)
- Good controllability even at low speed
- Compared with the previous FHA-B the new FHA-C series has the following additional features:
- higher maximum torque
- more compact design
- higher torsional stiffness
- higher maximum speed |
|
Features:
Measuring range up to 1000 mm in length, and up to 200 mm in diameter
Ultra-fast measuring technique due to triggered data acquisition by means of an ultra-high-resolution CCD matrix camera
Highly accurate measurement also of lengths by means of a focusing axis
Teach-in programming
Dimensioning is performed by clicking in the drawing |
|
| ... products without technical information |
| |
The new and innovative range of helical and bevel-helical units combines the most advanced design concepts and performances in full compliance with international standards (ISO, DIN, AGMA, etc.) for calculating gear geometry. We have focused our attention on researching the simplest and most standardised design and production methods with the aim of making production even faster and delivery times even shorter.
The high power to weight ratio of all units, combined with low volume, enables perfect installation in the most critical situations. One of main features of this range of gear units is the great versatility of applications and mounting, in terms of both position and fixing on site.
New concepts have been used to improve the noise level in a consistent way, by grinding all gears sets, both the helical and the Gleason spiral bevel type gears.
Because of higher capacity, particular consideration has been given to efficiency and housing surface area to guarantee a convenient heat dissipation in most cases.
|
|
| ... products without technical information |
| |
ALTERATION PLAIN OUTPUT SHAFT OR WITH KEY
Only applicable for alterations (lengths and/or diameters) smaller than standard shaft. See table below.
Contact us for dimensions superior to standard shaft. |
|
In applications where it is necessary to ensure proper alignment between a gearbox and a driven shaft, Brevini's in-line and right angle shaft mounted planetary gearboxes provide the ideal solution.
The ability of the compact and efficient shaft mounted gearboxes, not only to provide alignment between shafts, but also their flexibility of use and the fact that no machining is required to mount them to frames, are all major factors in their widespread use across all industry sectors. Complementing these user benefits is the flexibility offered by two different types of shaft configurations: hollow shaft for shrink disc connection or keyed cylindrical female shaft (FP type). |
|
| DSTI can provide custom rotary unions designed to mount directly to an existing shaft. These units can be used to feed air, grease & other medias into rotating shafts. Please consult your DSTI representitive to discuss the details of your specific application. |
|
Rotary Systems designs and manufactures a line of standard and custom over-the-shaft rotary unions.
The rotary union shown is constructed from carbon steel and utilizes a precision ground shaft, radial ball bearings and Teflon seals. This is a two passage rotary union with .25" NPT passages with a four inch bore through the shaft. This union was designed specifically for a high pressure hydraulic indexing application.
Our standard over-the-shaft line of rotary unions can be viewed on our website by clicking on the 011 series. Our standard unions are offered in two and four passages with a .5", 1.5” or 2.0” bore through the shaft. The bore through the shaft is independent from the union. Some customers will pass a shaft or electrical wires through this bore.
If you have a custom rotary union application, please contact our Technical Sales department at 1-800-959-0146.
|
|
|
|
see the results for the following category