|
|
A complete range for handling parts up to 20 kg :
Gripper:
- angular clamping 40° and 180°
- parallel clamping and long stroke
- compacts
- special
Linear modul
(with intermediate position, rod clamping)
Rotating modul
(with intermediate position)
|
|
Cam mecanism working in oil bath.
Combines rotation and lift movements. For repetitive process.Maintenance free system.
|
|
LINEAR MANIPULATORS of the series H-T are flat conjugate double cam mechanisms that transform the uniform rotary motion into a two-way linear indexing motion typical of pick and place movements. They are manufactured in three different sizes H65T, H80T, H105T and in two special long traverse versions H80TL and H105TL.
With the standard LINEAR MANIPULATORS it is possible to perform traverses up to 480 (mm) in a longitudinal direction and up to 120 (mm) in a transverse direction, reach a velocity of 60 (cycles/min.) and transport pieces up to 30 (kg).
|
|
SANKYO BH Series Linear & Rotary Assembly Base Machine
- Cam driven: accurate, high speed, high capacity, reliable
- 0 to 90-cycles per minute continuous or cycle on demand
- 6 to 24 indexing dial stops
- 0 to 12 came driven linear handlers
- Lift stroke 0~50mm, extend stroke 0~60mm (custom free)
- 90 to 330 degree index period
- Sychronized linear & rotary motions with 1 motor
- Linear precise motions with ±0.02mm accuracy
- 1-input shaft revolution equals 1-full cycle
- Clutch-brake drive up to 80 stop/starts per minute
- Multiple timing sensors, adjustable, for interlock/stop motor
- Optional quick adjust torque limiter with overload sensor
- AC, DC, UL/CE approved, explosion-proof, motor drives
|
|
The MAN family manipulators, featuring a single cam globoidal and flat combined, can turn uniform rotating motion into an appropriate and ordered series of movements, linear intermittent and rotating intermittent (indexing version) or oscillating intermittent (oscillating version) of the output shaft on which are installed gripper device.
The manipulators are characterised by: accuracy, speed and smoothness of the movements, low vibration, silent operation, simple construction, compactedness, oil-bath lubrication of internal components, easy installation and ample diversification of the output shaft movement cycles.
These features grant reliability and flexibility of use in applications that include machine loading-unloading, handling in assembly operations and transfer to conveyor belts.
They are available in five frame size: MAN10-20-30-40-50 with 45-65-85-110-165 (mm) max. linear stroke and angular rotation up to 180°.
|
|
|
Koike Aronson / Ransome manufactures a complete line of Head and Tail Stock welding positioners ranging from 600 to 240,000 pounds. Special engineered positioners are always available.
|
|
- Compact cast aluminum alloy housing
- Fast, accurate and repeatable
- Double extended cam-shaft
- CNC hardened cam-profiles
- Indexing or oscillating custom cam-motions
- Oil bath lubrication
- Can be fitted with reducer and drive
|
|
Mechanical rotary and linear manipulators are suitable for moving and positioning of pieces at high speed. Construction with positive movement, where masses are controlled in acceleration and deceleration, allows uniform transfer, without shocks and vibrations, up to 120 cycles/min. Linear manipulator horizontal stroke can be adjusted from 75 to 200 mm., while vertical stroke can be adjusted from 30 to 75 mm.
Rotary manipulator standard angular displacement can be of 30°
- 60° - 90° - 120° - 180°, and vertical stroke range from 40 to 180 mm.
On request, Autorotor can also supply motor drives for its products.
This material (reduction units, self-braking motors or dynamic brake motors,
brake-clutch units, converters, etc.) is not manufactured by Autorotor,
but supplied by very well-known trade marks.
Obviously, Autorotor follows customer's requirements for a specific trade mark.
|
|
Linear Modules
- SM type
Diameter mm Strokes in mm
16 30 - 60 - 90
20 30 - 60 - 90 - 120 - 150 - 180 - 200
32 50 - 100 - 150 - 200 - 250 - 300 - 350 - 400
40 400 - 600 - 800 - 1000
- SP32 type
- Stroke length can be adjusted on request, up to 10 000 mm
- For assembly within a frame, the SP32s can be delivered with a length of aluminium profile, according to your needs. The stroke length is adjusted on request.
- Frequent intermediate stops are possible, with centre-to-centre distances of only a few millimetres.
|
|
Rotating modules
- DM type
Diameter (mm) Rotation
12 From 0° to185°
20 From 0° to 365°
25 From 0° to185°
32 From 0° to 185°
63 From 0° to 185°
- DMZ type
Modules with intermediate stops
- Flange version with output shaft
|
|
The SB300 S is a truck-mounted kit, normally fixed to the chassis frame. It can also be engineered for a demountable application. This model is suitable for commercial and military uses.
The truck can be a 6x4 or an 8x4 axle model to support the container weight. The hydraulic system of the truck-mount is PTO /pump driven.
This kit comes with an internationally approved radio remote control, and can also be supplied as a cable remote with a 10m cable.
The SB300 series can also handle transfers to other vehicles.
|
|
TIPPING LIFT TRAILERS
CASE EQUIPMENTS
> 1 Very thick stainless steel or painted steel monocoque case.
> 2 Right and left side with supports realised by pressing.
> 3 Panels in front and in the back also pressed.
> 4 Anti-swirl peripheral superior supports.
> 5 Stainless case strips or epoxy, welded on the case.
> 6 Headings consolidated by stainless or steel wire stretcher, welded on the case strips.
> 7 Anti-splashes cover flaps on both sides of the door.
> 8 Anti-deformation door supports.
CHASSIS EQUIPMENTS
> The structure of the chassis is done in sheet steel with a thickness of 8 mm.
> The chisels are done in rectangular profile steel.
> The cradles and the supports of jacks are also very thick, in order to avoid any deformations.
> Adjustable arrow 2 positions.
> Screw crutch.
> Hydraulic dumping by hoses.
> Anti-scrap protection on jacks.
> Parking brake.
> Lighting in conformity with the law in vigour.
> Hydraulic braking on models BBE 60 and 60.
FOR OTHER OPTIONS AND DIFFERENT MODELS, PLEASE SEE THE DATA SHEET OR CONTACT THE COMMERCIAL DEPARTMENT...
|
|
TRIPLE-L® trailers feature the innovative Power Deck® System which provides more efficient loading and transporting of your payload. These trailers eliminate the use of cumbersome ramps or tilt beds by hydraulically lowering the entire deck to ground level. Your payload is then loaded by driving, pushing, or placing it straight on to the deck, which is then lifted into the transport position. TRIPLE-L trailers are available in Flatbed, Utility, or Enclosed configurations with capacities ranging from 2,200 – 10,000 pounds. These trailers are ideal for payloads that have low ground clearance, poor gradeability, unique wheel configurations, and applications where frequent loading and unloading are required.
|
|
|
Aerotech lift stages are available with direct drive or lead-screw-based mechanics to provide the ideal solution for your application. These stages feature resolution to 2 nm and travels up to 25 mm, with compact footprints, and are designed for a wide range of positioning applications.
|
|
eZ-Balance
Portable Machine Balancing Software for the
600 Series and ZonicBook/618E
Balance rotating machinery with eZ-Balance and the 600 Series or ZonicBook/618E. The combination of the 600 Series or ZonicBook/618E with eZ-Balance provides a powerful system for multi-plane (up to 7 planes) balancing applications. eZ-Balance computes the optimal balance weights and their locations, based on vibration data collected from the 600 Series or ZonicBook/618E. The data is displayed in a convenient Polar plot that indicates the magnitude and phase of the unbalance as well as time and spectrum data.
Key Highlights
• Multiplane trial and trim balancing
• Polar, time, and spectral displays
• Computes and stores influence coefficients for future trim balancing
• Vibration data can be collected by the 600 Series or ZonicBook/618E, or entered manually
• Balancing toolkit
- Trial weight calculations
- Weight splitting
- Centrifugal force
- Stock weights
-Weight removed
-Unbalance tolerance
• Balance solution can be based on multiple response points
|
|
| ... products without technical information |
| |
|
|
see the results for the following category
