|
|
|
Innovation 2008 - Galletti of implantation passing, with compass and stud - handle to resumption with compass and stud - pressori to puntale and spring in burnished steel and inox.
|
|
Material: Steel.
Chemical black finish with a black plastic ball knob.
|
|
Material:
Handle in die cast zinc to DIN 1743,
steel parts quality class 5.8 or
steel parts in stainless steel 1.4305
Surface finish:
Handle plastic-coated.
Steel black oxide finish.
Stainless steel natural finish
Note:
Standard colours are:
black satin finish, orange RAL 2004.
On request:
Other external threads, screw lengths, colours and special versions.
|
|
Size EX43 = 0.27 EUR
Size EX65 = 0.34 EUR
Size EX83 = 0.46 EUR
Size EX104 = 0.69 EUR
New style plastic clamping handles 20-40% cheaper then your current parts.We are offering direct factory prices through our warehouse in Czech Republic.
Introducing new clamping handles with new ergonomic design, robust construction and lowest price on the market. Our size EX83, EX65 are the best sellers for the quality, design and price.
We are also capable to make any other part for much lower cost.
We are looking for smart direct buyers and resellers worldwide.
Please, visit our web page www.elementrix.net to see the range of our products and feel free to ask for the quotation.
Material: Nylon GF30, steel,brass inserts
|
|
- Clamping lever for drill jigs
Application:
Any MayTec-connector can be equipped with a clamping lever.
For frequent opening and closing.
- Clamping lever for connector
clamping handle : PA-glass-fiber reinf.
clamping lever : with ratchet lever handle
annular gear : die casted zinc
thread : steel
|
|
ART. A148
MATERIAL:
Reinforced polyamide.
Oils and greases resistant.
SURFACE:
Satin.
COLOUR:
Black (RAL 9011).
CENTRAL CAP:
Grey polyamide (RAL 7035 code 13).
MAIN INSERT:
Brass blind threaded bush.
SPECIAL REQUESTS:
• It is possible to supply the inserts in different
materials, on request and for quantities.
|
|
The product family Adjustable Clamping Levers covers the following article groups:
- EH 2439. Adjustable Clamping Lever with inner parts from stainless steel (with female thread / screw)
- EH 2440. Adjustable Clamping Lever (with female thread / screw)
- EH 2442. Adjustable Clamping Lever axial bearing (with female thread / screw)
Advantages of axial bearing:
- Double clamping force with same lever size, by reducing the surface
friction.
- Protection of work piece by fixed locating face.
- Little settling due to higher pre-clamping force of bolt, e.g. thread.
|
|
| ... products without technical information |
| |
Permanent electro-magnetic clamping of moulds on injection mould presses adapted to all sizes and shapes of mould.
STÄUBLI offers a complete range of products serving the PLASTICS INDUSTRY including:
- quick mould clamping,
- quick connection of services using quick-release couplings and multi-couplings,
- automatic ejector hook-up,
suitable for all methods of mould changing: vertical or horizontal loading and existing or new machines.
|
|
|
|
|
|
Quad-Press: A magnetically clamped mold is subject to neither deformations nor to inner tensions.
The force is distributed uniformly throughout the contact area, instead of only being applied on the external edges of the base-plate, as it happens when traditional clamping methods are used.
The quality of the molded part is constant in time.
Each 80HC square pole generates a constant, predictable and concentrated force of 1000 kg.
This force improves the performances to an unbeatable level, giving a greater available force in a smaller contact area.
Lead time is strongly reduced; now the SMED production is a reality.
Moulds of any size, even bigger than the machine plates are easily clamped with no modification.
Quad-Press is maintenance free, due to it doesn't present any mechanical component inside.
The new IPC system is available on request with the touch-screen device.
IPC follows step-by-step the machine operator during mold change procedure and give in real-time the actual clamping force generated on the mold.
|
|
|
|
|
|
HotMAG
permanent electro magnetic system for quick clamping of high temperature moulds.
The new permanent electro magnetic system HotMag is the final answer to all the needs to make quick change operations on press machines working with high temperature moulds.
The innovative magnetic circuit, made of special solenoids and high energy permanent magnets, allows to
operate with temperature up to 250° C. (482 ‘F).
The full metallic surface allows the perfect stability and uniformity of clamping all over the contact area
granting high performances in the long run.
Quick: Few seconds only to activate and deactivate the system. Simply pushing a button!
Ergonomic: The operator that can remain always at a distance from the mould. No risk!
Easy and practical: No modification to the machine, no modification to the moulds and no special tools are required.
Time saving: The mould can be preheated outside the machine with a great advantages!
Safe: Only the high strength generated by the permanent magnets will hold the mould at indefinite period of time.
Convenient: The low investment and the high efficiency grants a quick pay back.
|
|
|
|
|
|
RINGSPANN delivers :
Clamping elements and standard clamping parts for customer designed clamping tools
Clamping tools to suit customer requirements
Clamping with Disc Pack:
Clamping diameter up to 200 mm
Clamping on workpieces onto two different diameters
Protective clamping of workpieces prone to distortion
Quick and easy changeover for other workpieces
Clamping with Elements:
Clamping diameter up to 600 mm
Clamping in/on very short locations
Protective clamping of workpieces prone to distortion
Compact design
Clamping area adaptable to design requirements
Clamping with Taper Collets:
Clamping diameter up to 200 mm
Mandrels for short lengths and blind bores from 10mm diameter
Mandrels with maximum torque transmission for heavy machining
Clamping with Hydraulic Systems:
Clamping diameter up to 400 mm
Sealed against swarf
Clamping range 0,3% of the clamping diameter, no axial pull back
Possibility of clamping several components at one time
Alternative mechanically actuated systems available if required.
|
|
CNC tool holders are available for all machines requiring CAT-V and BT tool holding systems. AT3 shank-taper accuracy exceeds ANSI standards by 35%. Choose from solid-style tool holders, ER and TG collet style tool holders and toolholder collets.
Buy CNC Tooling, Tool Holders, Tool Holder Collets and Bushings online at www.shophardinge.com
|
|
Vac-U-Lok has a wide selection of vacuum accessories for all of your vacuum system needs. No vacuum workholding system is complete without a coolant return system. Please review the items shown below to best determine the equipment you need to complete your vacuum workholding system.
- Automatic Coolant Return System ACRS-1
The ACRS-1 will drain 10 gallons per hour-automatically!
- Automatic Coolant Return System
ACRS-3HD
This unit will drain 55 gallons of coolant per hour-automatically!
- Automatic Coolant Return System
ACRS-3HD-3NPT
NEW! 100 gallons per hour draining capacity while still under vacuum!
|
|
|
|
see the results for the following category : 
