|
|
|
Ganter offers clamping and tensions levers made of plastic, steel or stainless steel in different sizes and versions.
|
|
|
Adjustable lever handle that can be reset to any angle. Ideal for clamping in a confined space, or when a specific handle position is desired. Rugged spring-loaded spline mechanism. These handles are incredibly strong, featuring a unique stainless steel spline inlay moulded into the plastic handle. This provides positive metal-to-metal mating with the serrated body, for high clamping torque. Available with a tapped hole or an integral stud.
|
|
Ganter offers adjustable clamping and tensions levers made of plastic, steel or stainless steel in different sizes and versions.
Adjustable hand levers have proved to be ideal whenever parts have to be clamped in a confined space or in a particular lever position. The centre insert is connected to the lever via serrations which can easily be disengaged.
Pulling the lever disengages serrations and allow-ing to be swivelled to the ideal clamping position. On releasing the lever the serrations automatically re-engage.
|
|
Material:
Handle in die cast zinc to DIN 1743,
steel parts quality class 5.8 or
steel parts in stainless steel 1.4305
Surface finish:
Handle plastic-coated.
Steel black oxide finish.
Stainless steel natural finish
Note:
Standard colours are:
black satin finish, orange RAL 2004.
On request:
Other external threads, screw lengths, colours and special versions.
|
|
MISUMI Europe
MISUMI offers more than 1 million mechanical standard-, purchasing- and drawing-components from one source. The voluminous catalogue contains over 40 product groups and all important information at a glance: configurable components, material, hardness, surface treatment, tolerance and price including volume discount, reliable lead time, technical drawings and application examples.
Additional features: Average delivery time between 6 to 8 working days, orders without markup for small-volume purchases, no minimum order quantity. MISUMI 24/7 e-Commerce enables our customers to find and configurate products online and download CAD-Data immediately. Quotations and orders can be created and saved directly online.
MISUMI - Precisely Meeting Your Demands
|
|
Material: Steel.
Chemical black finish with a black plastic ball knob.
|
|
ART. A148
MATERIAL:
Reinforced polyamide.
Oils and greases resistant.
SURFACE:
Satin.
COLOUR:
Black (RAL 9011).
CENTRAL CAP:
Grey polyamide (RAL 7035 code 13).
MAIN INSERT:
Brass blind threaded bush.
SPECIAL REQUESTS:
• It is possible to supply the inserts in different
materials, on request and for quantities.
|
|
|
Innovation 2008 - Galletti of implantation passing, with compass and stud - handle to resumption with compass and stud - pressori to puntale and spring in burnished steel and inox.
|
|
- Clamping lever for drill jigs
Application:
Any MayTec-connector can be equipped with a clamping lever.
For frequent opening and closing.
- Clamping lever for connector
clamping handle : PA-glass-fiber reinf.
clamping lever : with ratchet lever handle
annular gear : die casted zinc
thread : steel
|
|
The product family Adjustable Clamping Levers covers the following article groups:
- EH 2439. Adjustable Clamping Lever with inner parts from stainless steel (with female thread / screw)
- EH 2440. Adjustable Clamping Lever (with female thread / screw)
- EH 2442. Adjustable Clamping Lever axial bearing (with female thread / screw)
Advantages of axial bearing:
- Double clamping force with same lever size, by reducing the surface
friction.
- Protection of work piece by fixed locating face.
- Little settling due to higher pre-clamping force of bolt, e.g. thread.
|
|
Our customers`special tasks and production problems demand efficient and cost-effective solutions.
Specially designed Röhm power-operated chucking tools have gained the trust of our clients all over the world thanks to their high technical standard.
|
|
Stationary Workholding
We provide you with a complete solution for all of your clamping tasks!
Whether it is pneumatic, hydraulic or manual:
Our extensive product range guarantees you maximum flexibility in solving your clamping tasks.
The systematic approach to a solution
We combine standard components intelligently to solve your clamping task in a cost-effective and efficient manner.
The result – Enormous savings in set-up costs for your production!
|
|
Vac-U-Lok specializes in vacuum workholding solutions. Vac-U-Lok manufactures vacuum chucks in almost any size or shape, custom or standard design.
VUL-3240MS Vacuum Chuck with special right angle piping for tight machine tool enclosures.
|
|
Single-Station Rotary Concentric Ring Pattern Vacuum Chuck
VUL-12CR-11P is a special 12" diameter Vacuum Chuck with 11 ports that is mounted on a 3-Jaw chuck in a NC Lathe application.
|
|
|
Single-Station Rectangular Vacuum Chucks are available with the following part numbers: VUL-508SS (5"x8"), VUL-612SS, VUL-618SS, VUL-624SS, VUL-812SS, VUL-818SS, VUL-824SS, VUL-1020SS, VUL-1024SS, VUL-1030SS, VUL-1224SS, VUL-1230SS, VUL-1236SS.
|
|
The Alpha Mill Round Milling Chuck is a Permanent-Electro Magnetic System—it requires electricity for just a fraction of a second to polarize the magnets contained within the chuck.
No electricity is required to maintain the magnetism and is therefore "failsafe." The Alpha Mill Round provides significant magnetic clamp force for milling, drilling, tapping and other machining processes, while managing the magnetic flux.
Perfect for :
- Job Shops, Mold Shops or Production Machining
- Squaring Up
- Five Face Machining
- Thru Machining
- Pallet Applications
- Large Plate or block Applications
|
|
|
|
|
|
The Alpha Bi-Polar (ABP) has grown out of the need of many customers desire to hold bar stock, both flat and round. The ABP allows the user to have complete access to the top of the part without straps interfering with the process and reduces set up considerably.
- Available in 220 and 440-480 volts.
- Rigid steel and brass construction for better accuracy and longer life.
- Individual pole extenders can be utilized to raise a part off the magnetic chuck surface for through hole work and to adapt to varying diameter bars.
- Self Shimming pole extenders-Capable of holding parts with stepped diameters
- Permanent Electro-does not require electricity to maintain the magnetic field.
- Up to 0.250" of resurfacing capabilities on the magnet face.
- Magnetic clamping reduces vibration and increases tool life.
- Alpha's controllers are equipped with circuit breakers and can be integrated into a machines PLC.
- Magnetically balanced, each pole contains equal amounts of north and south magnetic flux to eliminate stray flux and to simplify pole placement.
- Available Accessories
- Pole extenders-used to raise a part off the surface of the magnet and vary the diameter range
- Self Shimming pole extenders
|
|
|
|
|
|
clamp on meter is a combination power analyzer, power quality logger, and clamp meter, and is ideal for monitoring electronic loads.
With the bright color power meter display to analyze the harmonic spectrum, a low-pass filter to remove high frequency noise, and a high EMC immunity design, the Fluke 345 power analyzer is ideal for troubleshooting power quality on switching loads. Additionally, the Hall Effect clamp meter design makes measurement of dc current possible without the need to break the circuit with the power meter. The internal memory of the power analyzer enables long-term power quality logging for analysis of trends or intermittent problems.
Applications
Setup and troubleshoot variable frequency drives and UPS systems - Verify correct operation by measuring key power quality parameters
Harmonics measurements - Uncover harmonic issues that can damage or disrupt critical equipment
Inrush capture - Check start-up current where spurious resets or nuisance circuit breaker tripping occurs
Load studies - Verify electrical system capacity before adding loads
|
|
Product ID: CA-60
AC/ DC mA Current Clamp-on Transducer
1. This miniature clamp meter features two Hall effect sensors
2. For use with any multimeter with 200mV or/and 2V ranges
for direct readout input impedance of least 1M ohm.
3. High conversion factor for low DC and AC mA measurement.
4. With the small jaw size it can fit into tight space in circuit panel
or wire bundle to take the reading
5. The high frequency response at 20 kHz is useful for
waveform monitoring on an oscilloscope.
6. Zero adjustment is made easy by just pushing the ZERO button.
7. It is best for locating small signal, industrial control,
battery leakage,and automotive usage
|
|
With its unique 100mm jaw opening, the Seaward Type L Plus large jaw current clamp meter is designed for the measurement of current in large diameter conductors and fuses.
With the ability to operate in the most difficult circumstances the instrument is capable of use on porcelain fuse carriers in distribution systems.
|
|
511 Clamp-On Meters
The Clamp-On Meter Model 511 is a general purpose professional clamp-on meter that measures up to the toughest standards. It is built into a rugged mechanical case and is designed using quality polycarbonate materials. This meter offers a complete set of measurement ranges and is in compliance with international safety and quality standards to ensure a professional and reliable measuring tool. The Model 511 is auto-ranging and provides the best measurement range and resolution for troubleshooting. It has a high resolution 40A range.
The Model 511 measures AC Amps, AC Volts, DC Volts, Ohms, Continuity (with beeper), Frequency (from V or A) and has a Diode Test function.
The Model 511 is sized for a comfortable, one-handed operation. This model is average sensing and designed for traditional average responding electrical systems. The jaw opening for the Model 511 is 1.575" (40mm).
|
|
Easily monitor leak current fluctuations
Wide bandwidth, 5 Hz to 15 kHz (Waveform output)
High-sensitivity with a full scale of 10 mA (resolution:10 µA)
High-accuracy at ±1 %
True RMS measurement
Analyzer functions, for filtering and output signals
|
|
Clamp-on current probes or "current clamps" enable the user to measure currents without breaking the electric circuit. Current clamps are designed with jaws that can be opened, placed around the conductor and clamped closed to form a magnetic loop around the conductor.
Current clamps offer a safe, cost-effective, simple and accurate way to take current measurements.
|
|
|
EROWA workholding systems very versatile and may be used for various applications. Pallet sizes, retaining force and positionning accuracy are features to consider.
|
|
Static hydraulic gripping units Ø 80 - 315
■ static cylinder + chuck units
■ closed center chucks type CL/AN/AL
Application/customer’s benefit
Gripping units designed to suit special purpose machines and transfer lines Also used as loading chucks to handle workpieces
Technical features
Fully independent static hydraulic gripping unit with the possibility to equip the actuating cylinder with different kinds of chucks, 2 or 3 jaws, long or short stroke, serrated or tongue & groove master jaws
Aluminium cylinder housing connected to the closed center power chuck with a steel flange
The cylinder needs a constant oil feed during clamping operation
|
|
ISVG4100
The simultaneous presetting and clamping of tools has been implemented consistently in this high-end system. After the actual dimension is set, the tool is shrunk to the required dimension fully automatically. The system is designed so that other conventional clamping systems (e.g. draw-in collet chucks) can be preset. The extremely stiff total construction guarantees high setting accuracies.
Ø3-Ø50mm
ISG3200
The universal shrinking system for the professional use of the shrinking technique. With the unique coil changing system the energy coupling is adapted optimally to the die chuck used in each case. This enables the smallest tool dimensions (5-50 mm) in HSS and even down to 3 mm in HM to be clamped. Four integrated fans facilitate the fast and uniform cooling of the die chuck.
: Ø3-Ø50mm
|
|
Automatic self-centering clamp-down chuck with sealed body system U-ASA II with 3 or 6 jaws linked by 2+2+2
For clamping of disks, drums, hubs, shafts, serrated crowns, differential housings and other mechanical components performed in mass production in the automotive industry.
Sizes from dia.200 up to 900 mm.
|
|
Independent chuck - Plate with holes & T slot - Workholding - Machine tools
Ladner sells a comprehensive range of Independent 4-Jaw chucks, with body made of steel or cast iron and plates suitable to clamp work pieces of odd or irregular shape.
The standard chuck diameter ranges from 150 mm to 1500 mm with larger diameters available upon request.
Ladner can deliver an independent chuck for almost any type of spindle, with the following types being the most common: A1/A2 (DIN 55026), Bayonet (DIN 55027) and Camlock (DIN 55029)
Plates can be supplied in the 300-800 mm diameter range configured with either holes or T-slot.
|
|
|
|
see the results for the following category : 
