|
|
|
|
|
|
DynaMIC
The DynaMIC operates according to the rebound hardness testing method (standardized according to ASTM A956) using a special signal processing technique that automatically compensates for changes in testing direction. Position the impact devices and read the hardness value - that is hardness testing in a matter of seconds. Different impact devices are available to ensure an optimum match to material and application. The DynaMIC DL Data Logger model can internally store hardness values along with statistical information.
Products Features:
Measurement of hardness independent of impact direction (without input of any correction values) due to patented signal processing
Standardized according to ASTM A956
Automatic conversion of hardness to HV, HB, HRC, HRB, HS, HL and N/mm2
Different impact devices dependant on application:
Dyna D for standard applications
Dyna G for heavy, solid parts
Dyna E for hardness range beyond 650HV
Data Logger version with internal data memory for measurement data and instrument settings
Applications:
Solid, coarse-grained components
Machine parts made of steel and cast aluminum alloys
Large series parts during production
Heavy forgings
|
|
●Horizontal protrudent nose design, testing on surfaces
difficult to reach
●Testing internal surface of ring parts whose diameter is
not less than 23mm (0.900〃)
●Testing external surface of round bars whose diameter is
not less than 3mm (0.120〃)
●Automatic test process
●High definition backlight LCD
●Simple and easy selectable operation menu
●RS-232/USB data output
|
|
The Rockwell Zwick/ZHR hardness testers cover the following applications:
Classical Rockwell methods: Zwick/ZHR 4150 (preload: 10 kg; test load: 60; 100; 150 kg), scales A B C D E F G H K L M P R S V.
Super-Rockwell methods: Zwick/ZHR 4045 (preload: 3 kg; test load: 15, 30, 45 kg), scales N T W X Y.
Combinations of Rockwell and Super-Rockwell methods: Zwick/ZHR 8150 (preload: 3, 10 kg; test load: 15, 30, 45, 60, 100, 150 kg), scales A B C D E F G H K L M P R S V N T W X Y.
Furthermore the devices are available in different degrees of operator convenience.
|
|
|
|
|
|
QM-HTDm is a compact easy to use unit designed for checking the hardness, thickness and diameter of samples of tablets regularly taken from a production line. It provides printed results eliminating the need for manual recording of data.
The unit is suitable for use in-booth, sited centrally in a manufacturing area or in a Quality Control Laboratory.
The QM-HTDm is robust and provides consistent accuracy. It can handle a wide variety of tablet shapes and sizes including elliptical tablets where simple change parts ensure accurate location. The user can select to measure hardness in Kp, N or Sc. To ensure safe and accurate calibration CI have designed a dedicated calibration kit.
The QM-HTDm has the ability to store details of over 150 products in a Product Library. Each product can be associated with a test method stored in the Method Library. The method determines the sample size, interval and user defined statistics.
Key Features
- handles different shapes and sizes
- detailed sample printouts
- consistent accuracy
- easy to clean
- stores details of 150 products
- adjustable sample size
- password protection
- selectable hardness units - Kp, N or Sc
|
|
| ... products without technical information |
| |
|
Rosenberger offers a wide product range for applications in industrial test & measurement such as RF high-precision connectors and adaptors, test accessories and test components.
|
|
| ... products without technical information |
| |
The MPA series is a co-design between SCANDURA & FEM and the I.N.RI.M (Italian National Research Institute of Metrology) with the objective to develop a series of pressure balances operating in liquid media up to 120 MPa.
Two different product lines are available: BLUE and RED
Here below main features of BLUE LINE are listed:
- expanded uncertainty up to 0,005% rdg
- liquid media
- different ranges up to 1200 bar
- built in Electronic Card for the errors calculations and the measurement of the ambient parameters
- automatic motor rotation drive system for the masses
- digital mass identification system through bar-code
- Interchangeability: MPA chassis can be used with any piston-cylinder unit and same mass set
|
|
Instrument Control Software
The only stand-alone software that captures, stores and analyzes test results
Analyze, retrieve and store data instantly with Autoware®, AR's electrical safety compliance testing software. Autoware S9870 is used in tandem with Associated Research's QUADCHEK II, HypotMAX, HypotULTRA III, HypotULTRA II, LINECHEK, and RUNCHEK series of instruments. Autoware control software provides the backup assurance manufacturers need to prove their equipment meets electrical safety requirements established by UL, CSA, IEC and other international agencies, and the European Norms such as the Low Voltage and Medical Directives.
|
|
| ... products without technical information |
| |
|
|
|
|
CapStar II is a simple and easy to use digital torque tester. The accurate information provided can then be stored in the internal memory, and downloaded to a printer or computer.
The LCD digital read-out clearly displays the peak torque of each test. Preferred units of measurement may be selected from a list of seven options. Statistical analysis of sigma, mean and range is also available when the data is printed out.
Container to be tested are located in adjustable jig capable of clamping circular or custom bottles and jars from 10 mm to 130 mm in diameter. Child resistant closures, much used in the pharmaceutical industry, can also be tested.
CapStar II is housed in a rugged, drip proof ABS housing with wipe-clean, touch sensitive controls. CapStar II is portable, battery powered and can be used with an optional mains battery charging unit. The screen displays a warning when the batteries need replacing or charging.
To save power CapStar II switches off automatically if no key is pressed within a specified pre-set period.
|
|
|
The ground resistance of substations can be measured with two auxiliary electrodes which are put into the ground. To avoid influences from the mains current and its harmonics, this measurement should preferably be carried out with 128 Hz.The high output power of the CPC 100 ensures a high ratio of the signal level to the noise level. Thanks to the signal processor technology, the measuring procedure is very selective and disturbances by ground currents are reduced to a minimum.
|
|
| ... products without technical information |
| |
|
|
|
|
OMICRON secondary injection test sets and measurement devices are the right choice for Utilities, Industry and Railway as well as for Relay and Measurement Device Manufacturers. The combination of a robust, truly portable, reliable and accurate Hardware design together with the unrivaled Test Universe Software is the basis for OMICRON's ongoing success in maintaining its place as World Leader in the 3-Phase secondary injection test set market.
CMC 356 - Protection Relay Test Set and Commissioning Tool
The CMC 356 is the universal solution for testing all generations and types of protection relays. Its powerful current outputs make it ideal for testing electromechanical relays with high power demands. The integrated network interface also enables the use of the device for testing in IEC 61850 environments with GOOSE and Sampled Values simulation and subscription functionality.
CMC 256plus - Protection Relay Test Set and Universal Calibrator
The CMC 256plus with its extended precision is the most accurate solution for testing protection relays and calibrating all kinds of meters, power quality devices and transducers. It is the first choice for all applications requiring the highest versatility and precision. With its IEC 61850 GOOSE and Sampled Values simulation and subscription functionality it leads the way in testing IEC 61850 substations.
CMC 156 - 3 Phase Voltage / 3 Phase Current Test Set
The CMC 156 is the smallest and lightest solution for three-phase testing of numerical relays, meters and transducers. Weighing only 9.8 kg / 22 lb., it is ideal for applications requiring a high degree of portability.
|
|
Capacitance and Dissipation / Power Factor Test System
OMICRON's CP TD1 unique capacitance and power / dissipation factor (tan delta) measuring instrument is an accessory unit to the CPC 100, completing it with the ultimate insulation diagnosis solution. Controlled by the CPC 100, the CPC 100 + CP TD1 combination provides fully automated testing and reporting capabilities for the comprehensive testing within one portable system.
Applications
- Insulation condition: capacitance Cp, dissipation factor (tan delta), power factor
- Power transformer diagnosis
- Bushing testing
- Circuit breakers insulation diagnosis
- Rotating machines (motors & generators) insulation diagnosis
|
|
The test and measurement methods for "Testing the Immunity to Conducted disturbances induced by an RF Field" are defined by the International standard IEC/EN61000-4-6.
This test can be done by individual components, or by one compact unit like the CIT10 which includes all the necessary components for IEC/EN61000-4-6 testing in one easy to use system.
|
|
|
|
|
|
Recent sales of Zwick’s electro-mechanical testing actuator have provided unique solutions for customers carrying out diverse mechanical testing. For example, in the automotive industry it has been used to test seat head rests, foams, steering columns, gearshifts, brake pedal assemblies, switches, connectors, and solenoids. In the medical industry components such as needles and bone have been successfully evaluated, whilst for sporting equipment the system has carried out tests on skis, and snowboards.
This wide variety of tests is possible due to a truly impressive specification, and a reliable testing system based on many core components from the Zwick Roell Group product portfolio. The EM Actuator is the obvious solution for many different and complex testing applications.
The electro-mechanical testing actuator is quite unique as it can be directly assembled, at any angle, into a production line and controlled via dedicated I/O control systems, or it can be used in stand-alone mode with a dedicated test stand. In addition it can be fitted to any standard Zwick universal test frame thereby adding an additional test axis for tests which require side loads All standard Zwick attachments can easily be attached.
|
|
IEDScout is a universal client to IEC 61850 servers - such as substation IEDs - and a publisher/subscriber for GOOSE messages. It provides numerous useful functions needed in the substation or the laboratory.
As an IEC 61850 client it supports many functions, from generic reading/writing of data attributes to using the self description of the IED and producing SCL files from it. It detects GOOSE messages on the network and monitors them. The IEDScout also simulates GOOSE messages. With IEDScout, the protection engineer has new options to enhance the depth and quality of testing.
Applications
- Testing
- Troubleshooting
- Commissioning
- IED Development
Download a free evaluation version on www.omicron.at
|
|
|
|
