|
|
saia motor controller
Caractéristiques :
• logiciel destiné au développement, au test et à l’optimisation de systèmes de moteurs pas à pas
• logiciel fonctionnant sous Windows
• logiciel simple d’utilisation
• réglage rapide des paramètres
• visualisation de la vitesse et de la position
• courses de positionnement
Dimensions (mm) :
Boîtier en métal 160 x 100 x 30 (euro-PCB)
Pilote : pour moteurs polaires et bipolaires
Tension d’alimentation (V/CC) : de 3 à 55 V/CC – 24 V/CA
Alimentation du moteur:
tension constante et courant continu (commandé par hacheur)
Mode de pas : pas entier, demi-pas et micro-pas
Source d’impulsion : interne, programmable
Entrées de commande :
• 3 entrées numériques
• 4 sorties signal
• 1 entrée analogue 0 … 10 V/CC
• contact à relais
Configuration : RS 232, USB
|
|
| PMD's motion control Developer's Kits are integrated board and software packages available to designers who need to do electro-mechanical and software design using PMD's motion processors. These motion control developer's kits include the surface mount card, interconnection cables, a full set of manuals, and a CD-ROM containing PMD's powerful Pro-Motion GUI and C-Motion to simplify development. |
|
The development kit DVK90109 has been developed by Melexis to create specific applications using 125 kHz protocols and to evaluate the advantages of the MLX90109 transceiver IC.
The DVK90109 results of the combination of the development board DVKRFID and the evaluation board EVB90109. The EVB90109 is plugged on the DVKRFID through a 10 pins connector (including Coil, VCC and Ground) and controlled by the microcontroller ATMEGA128.
A set of commands has been elaborated by Melexis to define the communication between the Computer and the evaluation board EVB90109.
Other products available: |
|
No cogging or preferred rotor position
No iron losses
Extremely low current consumption
Low audible and electrical noise
Extremely light and compact
Smooth and accurate speed, position, and torque control
Low vibration
Speeds up to 100,000 rpm
Electronic commutation for extremely long operational lifetime
High precision gearboxes available in all sizes
Feedback components available in all sizes
Control electronics available for all motor series
Custom systems available from design to production
|
|
Characteristics of the ML 1 linear motors
- direct drive with uniform, linear force
- particularly suitable for positioning and feed movements of high dynamics and high accuracy, e. g. in: handling and assembly systems, packaging machinery, electronics production machinery
- compact size
- low weight
- ironcore versions with low attractive forces or ironless without attractive forces and cogging
- high acceleration (up to 2 kN peak force)
- high speed, up to 20 m/s
- high dynamics and accuracy in combination with high-resolution optical encoders
- motor length as required since secondary part (magnetic plate) consisting of elements
- also available as complete linear direct drive consisting of coil unit, magnetic plate, incremental encoder, and guides |
|
| NSK motors are high precision, high speed positioning units. NSK has carried megathrust and megatorque motor lines in the past. NSK now offers only the PS Series Megatorque Motor; all other motors have been discontinued. NSK will continue to support and provide information on all motors. |
|
The FHA-C series digital AC hollow-shaft servo actuator, combining precision Harmonic Drive gearing with highly dynamic AC servo motors, offer unique features unsurpassed by conventionally geared drives. Used in highly demanding industrial servo systems they provide precision motion control and high torque capacity in a very compact package. A HIPERFACE® or Siemens compatible encoder with sinusoidal output signals provides feedback information for the FHA Series Actuator with Sine/Cosine Encoder. The actuator is compatible with a wide variety of currently available digital servo drives for Sin/Cos motor feedback systems, e.g. Simodrive 611D/611U, SIMOVERT-MASTERDRIVES or NUM MDLU. Matching SC-610 digital servo control units, which can be used for current, speed or position control are also available.
Advantages:
- Backlash-free precision gear
- Hollow shaft from 18 mm to 45 mm
- Transmission accuracy < 60 arcsec
- Repeatability < ± 6 arcsec
- Sine-commutated AC hollow-shaft motor
- Motor winding for 320 VDC / 600 VDC
- Winding temperature monitoring via temperature sensor
- High capacity and high stiffness cross roller bearing
- Sine/cosine-encoder for use with SIMODRIVE 611D/U and SIMOVERT MASTERDRIVES MC
- HIPERFACE®- encoder for operation with Harmonic Drive® servo controller SC-610 or a variety of further servo controllers (NUM, CT, Danaher Motion, Elau, etc.)
- Good controllability even at low speed
- Compared with the previous FHA-B the new FHA-C series has the following additional features:
- higher maximum torque
- more compact design
- higher torsional stiffness
- higher maximum speed |
|
The PMA-Series DC-Mini servo actuators consist of a Harmonic Drive box in mini or super-mini size combined with a DC servo motor and feedback device. All sizes are available with an incremental encoder. The size 8,11 and 14 are also available with a holding brake, as option. Major features of these actuators are:
Advantages:
- Zerobacklash positioning in low power applications
- Easy adaptation to readily available servo controllers via incremental Encoder feedback
- 12V/24V DL-Power supply
- Combination of DC-mini-motor and precision gear
- Torque range up to 20 Nm
- Speed range up to 180 rpm
- Repeatability about ± 1 arcmin
- Available in 4 sizes with ratio 50:1 - 110:1; with encoder |
|
SERVO-MOTOR FHA-MINI
hollow shaft Mini-servo-motor associating an engine brushless, a coder and a reducer without play HARMONIC DRIVE.
Mini servo-motor cubes with hollow shaft.
There exists in 3 sizes: a cube of 50,60 or 75mm on side.
Benefit produced:
* Most compact of the market: 4,8Nm in a cube of 50mm of with dimensions!
* High dynamics with its engine brushless
* Utmost precision with the reducer with null play HARMONIC DRIVE.
Characteristics produced:
* Vmax up to 200 tr/min,
* Cmax until 28Nm,
* Mini hollow shaft of 6,2 with 13,5mm,
* A cube of 50,60 or 75mm on side,
* Report/ratio of reduction: 30,50 or 100,
* 2 tensions of winding to the choice for a maximum adaptability,
* Hollow shaft, high integration, facility of startup,
Sectors of use:
* Robotics,
* Machine tools,
* Special machines,
* Embarked solutions. |
|
Servo-motor F
Servo-motor associating an engine brushless, a coder and a reducer without play HARMONIC DRIVE
You profit from a bearing from exit to cross rollers and compatibility with the majority of the numerical controls. The servo-motor F is ready with employment.
Benefit produced:
* Utmost precision of the reducer with null play HARMONIC DRIVE,
* Adaptability with the majority of the numerical controls,
* Solution lends to employment,
* Flexibility on the choice of the coder, the brake, the report/ratio of reduction,...
Characteristics produced:
* Couples of exit of 52 with 1.840Nm,
* Modular concept: you select winding, the report/ratio of reduction, the coder and your options,
* High torque, ready with employment and compatible with the majority of the numerical controls.
Sectors of use:
* Machine tools,
* Special machines |
|
| IclA intelligent compact drives consist of a motor and control electronics. The drives are controlled via a fieldbus or a pulse interface. IclA are used as decentralised drives in machine and automation applications. In connection with a motion controller or a PLC, complex automation tasks can be performed in a simple and cost-effective way. Complete function modules are available for easy motion programming with a Schneider Electric motion controller. |
|
The family with success of the drives of FlexiDrive positioning was lately supplemented by a new compact alternative MSIA. This alternative delivers, in discontinuous service, up to 238 W for a depth of assembly of only 245 mm reducing included/understood, and can be equipped with radial or axial connectors of exit.
The systems of drives FlexiDrive MSIA are built on the basis of engine with D.C. current without brushes with integrated positioning control. A multi-turn absolute coder is also integrated, delivering a signal coded on 14 bits per turn, for more than 260.000 turns. The whole is controlled via an interface Profibus DP or Canopen. FlexiDrive is used for the automatic adjustment of the format on the packing machines, of work of wood, paper or metal.
This design "all-in-a" causes to appreciably reduce the costs of engineering and wiring as well as the size of the electrical power boxs. The positional checking of the axis, ensured by a multi-turn absolute coder, guarantees tiny times of preparation and handing-over under operation, even after a total cut of the installation. With this new version, you have a solution of drive requiring even less place than before. |
|
| ... products without technical information |
| |
Type A and Type B
The two drive types are controlled by a simple cable remote control with up/down keys. We recommend Type B for high loads. The engine and the control are built into the housing. The transformer (230 VAC, optionally 110 VAC) is attached on the outside of the housing. The cable remote control (2 m cable length) is installed below the table edge at the desired location, and can be pushed under the table top.
Typ C
On drive Type C different heights can be memorized and automatically selected. The memory board also has a digital height indicator. The infrared remote control is available as an alternative to the memory board. The power supply (230 VAC, optionally 110 VAC) is integrated into the control unit. The memory board (2.5 m cable length) is installed below the table edge at the desired location, and can be pushed under the table top. |
|
Motor drive with through-going hexagon socket.
- integrated position measuring system
- simple upgrade from manual to motorized solution
- completely damped against vibration and noise by an elastic coupling as well as by several absorbers |
|
MB series characteristics:
MB reducer consists of compressed drive devices, friction transmission devices and speed-regulating devices.
Wide speed-regulating range, stable running,
Speed-regulating range R=5, suitable for constant running at clockwise orcounterclockwise, speed can be varied at the starting or in running.High precision of speed-regulation, coaxial , compact design, light weight. Under permissible load, certain output speed is constant. Stable running, silent, long lifetime, less maintenance, easy operating, high efficiency.
Rotation direction,
Basic speed range: 200-1000rpm
Combination: 0.001-2000rpm(Subsection)
Torpue: 1.5-980kW
Power: 0.18-22kW
|
|
Hollow shaft (hex) gear motor. DC motor with worm gear.
- Actuator with integrated distance of travel output
- Simple upgrade from manual to motorized system
|
|
Tritex Series brushless servo-gearmotor with amplifier and control
Frame Size 2 – 3.5 inches, 51 – 89 mm
Maximum Continuous Torque Rating 2078 lbf-in, 235 Nm
Maximum Motor Speed 2500 rpm |
|
The Sumitomo Cyclo drive is unsurpassed by any other inline drive available in the market today. Cyclo's unique epicycliodal design has advantages superior to speed reducers using common involute tooth gears. Cyclo components operate in compression, not in shear. Unlike gear teeth with limited contact points, a Cyclo has two thirds of its reduction components in contact at all times. This design enables Cyclo speed reducers and gearmotors to withstand shock loads exceeding 500% of their ratings, and provide exceptional performance, reliability and long life in the most severe applications.
Features & Benefits:
- Highest overload capacity, exceeding 500%
- Exceptional life with a 24 month unlimited warranty
- High efficiency, even at high reduction ratios
- Unlike involute gearing, no thermal limits
- Available as inline speed reducer or gearmotor
- Ideal for severe, high shock applications
- Grease lubricated for no maintenance |
|
Fine Cyclo Speed Reducers are designed for robotic and other very demanding applications. These reducers emphasize zero backlash, extremely small lost motion and very high torsional stiffness to insure the ultimate in positioning accuracy. Because Fine Cyclo is based on the Cyclo speed reduction principals and technology, it withstands high shock loads, and boasts high reduction ratios in a small package.
Features & Benefits:
- High Shock Load Capacity
- Compact Size and High Torsional Stiffness
- Small Hysteresis Loss
- High Efficiencies and Low Vibration
- Multiple Configurations for Application Flexibility |
|
Uniblock design for foot and flange mounting. Gear case machined on all sides for universal application.
Revolutionary new gearing geometry here and in all the other models results in exceptional running smoothness. For special environmental conditions the gear unit can be fitted with two shaft seals. |
|
| The Sumitomo Cyclo drive is unsurpassed by any other inline drive available in the market today. Cyclo's unique epicycliodal design has advantages superior to speed reducers using common involute tooth gears. Cyclo components operate in compression, not in shear. Unlike gear teeth with limited contact points, a Cyclo has two thirds of its reduction components in contact at all times. This design enables Cyclo speed reducers and gearmotors to withstand shock loads exceeding 500% of their ratings, and provide exceptional performance, reliability and long life in the most severe applications. |
|
| The Series M gear motor range takes advantage of many years of accumulated design expertise, together with the use of high quality materials and components. The end result is a series of speed reducing and geared motors offering high load carrying capacity, high efficiency, quiet running and reliability. |
|
The uniblock gear case machined on all sides, the particularly stable case and minimum outside dimensions enable diverse mounting options and applications.
As a result, these motors often form an integral part of our customers’ machine designs. High precision manufacturing and top gearing quality guarantee minimum backlash in Watt Drive gear units. |
|
| The Hyponic geared motor is based on 60 years of experience in the development and manufacture of gear and drive solutions. To date there are over a million Hyponic geared motors in service. The latest generation is characterized by a more compact design, a modular system, maintenance-free operation and universal installation positions. With the IP65 (wash down) option, the Hyponic is an ideal solution for beverage bottling plants and food manufacture. Hypoid gearing technology in case hardened steel, patented by Sumitomo, provides high efficiency and is far superior to the customary worm gears due to gear ratios from 5:1 to 1440:1. The Hyponic gear combines the cost advantages of the worm gear with the technical characteristics of a bevel gear. |
|
The Sumitomo Hyponic gearmotor represents 60 years of excellence in the design and manufacture of premium gearing solutions. With over one million Hyponics currently in service, the newest model features a more compact, modular housing, maintenance-free grease lubrication, and high efficiencies. Options include C-Face configurations and gearmotors. With washdown duty as a standard option, Hyponic is the ideal choice for bottling, bakery, and food processing industries. Sumitomo's patented all-steel hypoidal gear technology is extremely high-performance and exceptionally more efficient than worm gearing across ratios from 10:1 to 240:1.
Features & Benefits:
- Patented Hyponic gear technology is up to 90% efficient across all ratios and requires no cooling fan
- Offset, all-steel hypoid design transmits torque more efficiently for more torque per unit in a smaller, more compact size
- Grease lubrication is trouble-free, with no oil to change or maintain
- Compact and lightweight design in an aluminum, corrosion resistant housing with optional washdown protection
- Optional plug-in shaft and bolt-on feet afford multiple mounting configurations
- Hollow bore makes installation and retrofit quick and easy
- Extremely quiet, smooth operation is ideal for commercial use
- Two-year warranty
- Optional popular bore sizes available from stock: 1 3/16", 1 7/16", 1 15/16", 2 3/16" |
|
Due to the unique combination of newly developed worm wheel material with special lubricants, extreme precision and optimized shapes, this powerful motor achieves comparatively high levels of efficiency and torque. The case machined on all sides enables diverse mounting options.
Double-chamber shaft seals made of HNBR are used as standard, guaranteeing complete leak tightness. |
|
|
|