|
|
PM100-G - Fiber Optic Power Meter
Simple optical power and loss measurement
PM100-S - Fiber Optic Power Meter
Simple optical power and loss measurement
PM200 - Fiber Optic Power Meter
Link certification and reporting tool
FO600 - FiberMeter Optical Power Meter
FO610 - High Power FiberMeter Optical Power Meter
Ideal for testing and certifying in both Multimode and Single Mode applications
|
|
Ideal for link qualification, the FiberBasix 500 series comprises the ELS-500 Light Source and the EPM-500 Power Meter. These instruments come with pass/fail thresholds (LED indicator) and a memory capacity of 1000 data items.
Applications
Link-loss characterization (ELS-500 Light Source)
LAN/WAN certification (ELS-500 Light Source)
Link-loss characterization and LAN/WAN certification (EPM-500 Power Meter)
Key Features and Benefits
Error-free testing features: automatic wavelength recognition, and no offset nulling required
Data transfer to a PC via USB connection
One-touch storage of results for all wavelengths at once (on the EPM-500)
Complete reporting software
|
|
|
The OP510 was specifically designed for applications where cost effective solutions for measuring, monitoring and logging of insertion loss or power fluctuations are needed. The OP510 is a small (4"x2"x1.25") desk friendly module designed such that minimal movement and bending of the reference- and test cables is necessary. This results in stable, accurate and repeatable measurements.
|
|
Two FasTesT ports: a three-wavelength singlemode port, including either 1625 nm or 1490 nm, and an optional two-wavelength multimode port, for a total of up to five wavelengths
Visual IL and ORL pass/fail analysis
Compatible with both the FTB-400 and FTB-200 platforms
FTTx ready: allows for the testing of passive optical networks (PONs) at 1310 nm, 1490 nm and 1550 nm, the three wavelengths recommended by the ITU-T (G.983.3) for PONs
Three-year warranty and recommended calibration interval, error-free testing and minimized training time
|
|
|
Luna Technologies' Optical Backscatter Reflectometer (OBR) delivers unprecedented inspection and diagnostic capabilities for the fiber-optics industry. Luna's state-of-the-art OBR provides isolation of faults and problems well before final test, saving hours in rework and hard dollars in yield loss.
|
|
|
Insertion Loss and Return Loss measurement for all four FTTX wavelengths. The 'no mandrel' method combined with concurrent dual-wavelength measurement makes this instrument the most efficient tool in FTTX component verification.
|
|
| ... products without technical information |
| |
|
|
|
|
InfinityQS Measurement Systems Analysis (MSA)
Accurate SPC data relies on proper use of gage and test equipment. To ensure the validity of your results and optimize the performance of your entire system, you need to evaluate your equipment, not just in a lab, but in the production environment as well. InfinityQS MSA gives you this capability in an easy-to-use software module that works in tandem with your SPC system.
Perform Gage Studies Right on the Plant Floor
InfinityQS MSA lets you perform gage studies in exactly the same manner as your SPC data collection system, ensuring that the entire measurement system is capable of meeting all the stringent requirements imposed by your shop floor data collection. Best of all, InfinityQS MSA interface is easy to use so it will get used. All you need to get started is name a study, answer a few questions regarding data entry and start taking measurements. Analysis is automatic once the trials are complete. Now you're on your way to superior performance.
InfinityQS MSA offers a full suite of features, including:
- Database Independence
- Familiar Data Entry
- Multiple Gages, Characteristics and Calculated Fields
- Multiple Reports Plus Control Chart Analysis
|
|
|
Feature-oriented Calypso® software offers all standard interfaces. Results can be transferred to SPC software; automatically generated measurement plans exported to other measuring machines. Non-Zeiss measuring systems can also be operated with the Calypso DME client provided they are equipped with a DME server – even articulated arm measuring machines, laser trackers and computed tomography systems. More information on Calypso, Holos®, Pi-Web and other software from Carl Zeiss is available here.
|
|
The qs-STAT Measurement system analysis module gives you every tool you need to successfully carry out you gauge system qualifications.
Gauge capability and GR&R studies are key to any successful process or 6sigma study. This qs-STAT module calculates to standard (AIAG, VDA, etc) rules and also offers unique methods for special conditions.
|
|
Ideal CMM software offering an excellent value for money alternative entry level solution.
CAPPS complies with all the typical measuring requirements reliably and can be expanded at very reasonable costs to higher levels at any time point.
Furthermore, interfaces to processing machines are available, making immedeate transfers of the measured results to central processing systems possible.
Regardless of the machine type, for both the fully automatic CNC controlled machines as well as for the manual machines, the CAPPS software offers you the best value solution available.
|
|
Description
ATEasy is a test executive and a rapid application development framework for functional test, ATE, data acquisition, process control, and instrumentation systems. ATEasy provides all the necessary tools to develop, deploy and maintain software components - including instrument drivers, test programs, user interface, as well as a complete and customizable test executive. It is designed to support and simplify ATE system applications with long product life cycles. With ATEasy, test applications are faster to generate and easier to maintain.
|
|
| ... products without technical information |
| |
|
|
|
|
We have perfected the design & manufacturing of wide range of Fabric Inspection Machines available in various working widths which are easy to operate, technically advanced and programmable machines in the field of fabric quality control. Being developed by highly qualified engineers having vast experience of this field, our machines are equipped with all necessary features like tensionless handling, accurate length measuring, appropriate illumination, Straight roll selvedge, variable roll hardness, auto cutting etc.
! Efficient inspection of medium & heavy quality fabric.
! Efficient inspection through top & bottom illumination.
! Tensionless movement of fabric on inspection table.
! Full forward & reverse run of fabric.
! Speed variable from 0 – 50 mtrs/ min.
! Compact & crease free rolling on winding tubes.
! Max. Roll dia. Up to 1000 mm.
! Machine with any input & output of Roll/ Pile/ Big Batch can be manufactured.
! Length measurement by reputed counter meter.
! Straight & uniform roll winding through efficient selvedge guider.
! Operator friendly, improves productivity, reduces labour.
|
|
|
|
|
|
- MS Side frames pointed with hardwearing stipple finish stowing enamel . This makes the finish permanent..
- A cradle with tow M.S. side brackets and 6 rollers running on ball bearing to place the fabric roll. This arrangement allows tensionless unwinding of the fabric.
- Inspection table is laminated black/white, which enhances the defect identification procedure by making defects more easily visible to the operator.
- The angle of the table is changeable in order to allow the operator to select the right viewing angle. Also, mending of the fabric is easily possible due to this arrangement.
- Two overhead and two underneath tube lights are provided to optimize the lighting.
- Positive driven batch winding mounted on M.S. fabricated frames having two rubber strip coated rollers and batching roll guides. The fabric is wound on the batch roll by surface contact.
- A scroll rolls right after the inspection table opens the fabric roll.
- A bow bar is also provided to open the fabric right before the winding, which gives perfectly wound tight rolls.
- This winding arrangements winds rolls by 25% tighter than the traditional winding mechanisms.
- Measuring Counter is provided in front on the inspection table for easy viewing
- FORWARD/REVERSE/STOP push button controls mounted on inspection table on both sides.
- A special jogging (Inching) device is also provided.
- Soft start and instantaneous stoppage of fabric.
- MCB's to automatically stop the machine at the time overloading.
|
|
Low-cost rewinding and cutting machine for rolls of fabrics.
Used by wholesalers.
# Fabric width up to 1800mm
# Maximum roll diameter 300mm
# One person operation
# Optiona accurate length measurement system with digital readout
# Varispeed rewinding system
# Machine dimensions 2100x 1000x 950
# Power supply 230V, 50/60Hz, 0.3kW
|
|
Checking - rolling - measuring machines with automatic or half automatic packing.
Main operations:
-Checking, rolling, measuring any type of cloth.
-Cloth inlet from small/big rolls and from folds.
-Cloth outlet on small/big rolls and on soft folds.
-Infinitely variable speed from 0 to 160 m/min. according to the type and the cloth to be rolled.
-Selvedge alignment of proportional photo-electric type.
-Innovative synchronisation systems of the driven cylinders allow rolling operation with constant tension of any type of cloth, needed compactness besides precise measuring.
-These machines are manufactured till max. working width of 4500 mm.
-You can add, on request, informatic control systems, fault detection, labelling, sewing unit, cutting machines, automatic elimination of second choice cloth without manual intervention of the operator, packing, etc.
|
|
Clamping systems for measure machines as building set
The component fixing is especially critical in the measure technique. You must guarantee that the component is fixed on a measure machine without any bracing. Otherwise the measure results would be adulterated and this may have serious consequences.
The flexibility of the clamping systems is also very important. A remodelling must be fast and uncomplicated. This is an ideal territory for the clamping system “Spannfix” from THOME PRÄZISION.
A wide modular system affords the fast prepare and accommodate of devices. All parts are produced with high-class and hard anodised aluminium. In addition to a saving of time can be reached a saving of costs because of measure results and flexibility of the system.
Flexible, tough and easy. Our clamping system also solves your clamp jobs fast and faithful.
|
|
HOLSTER BAGS
Practical in every detail.
Made-to-measure openings for easy access to controls, keypads or connectors.
Belt holsters can be rotated on the belt and can be removed quickly when required.
Ideal for small data entry devices. Also available in washable material.
|
|
Do you attach special value to the durability and performance of your vacuum instrumentation? We as developer and manufacturer of vacuum transducers, gauges, vacuum meters and controllers supply products which will exceed your expectations.
Thyracont Vacuum Instruments GmbH supplies vacuum measurement and control instruments for rough to ultrahigh vacuum.
All our products are “Made in Germany”
|
|
Alcatel Vacuum Technology is proud to introduce the Adixen 2000 vacuum measurement series, blending experience and innovation.
The 2000 gauge series provides pressure measurement from atmosphere down to 4.10-10 mbar. The Adixen gauges and controllers give you more than a simple pressure measurement, connected to a network with 2 set-points, 0-10 V or RS 485, the gauges can drive a production process or record the pressure trend and more.
|
|
Many vacuum applications operate only in a specific pressure range. Analog and digital total vacuum or pressure measurement instruments are employed to measure and control the total pressure in a vacuum system. Pfeiffer Vacuum offers you three different lines of total pressure gauges.
|
|
| ... products without technical information |
| |
|
Spring-pressing automatic equipment. It can be combined with different elements: vibrator, further pressing systems, camera for image analysis, dynamometer measuring both power and/or position, multi-way sorter.
|
|
SecureLinx -Surge Protection for Security Products
Premiere Surge Protection for all your Security, CCTV, Access Control and Alarm applications
|
|
Weidmüller develops, produces and sells high-quality overvoltage protection and has established this field as its core line of business over the years. Our objective is always first and foremost to fulfil our customers’ application requirements. With our know-how, we have developed a programme which combines reliable overvoltage protection with affordable solutions: in low-voltage power supplies, I&C technology, telecommunication and industrial data processing.
|
|
| ... products without technical information |
| |
KRAL Volumeter® for research and production test stands. Laboratory measurement precision is achieved despite fast flow changes and fluid oscillations.
The ideal conditions at the Bureaus of Standards however show the potential of KRAL precision. The screw spindle-metering from the KRAL Volumeter is on one hand very robust and handles the oscillation from pressure waves. On the other hand, the spindles are very quick and can follow fast changes of the flow velocity. Optional pressure pulse compensation is available that detects transient fluid waves.
Please consider that we are a manufacturer of high quality displacement pumps and flowmeters for liquids. The products (pumps with magnetic couplings, high pressure flowmeters and flowmeters – chemically resistant) mentioned on this portal are only part of our product range. Please find more detailed information on our website or directly from us.
|
|
|
|
|
|
measuring tube inside diameter:
25 mm; 32 mm; 40 mm; 50 mm; 80 mm; 100 mm
flange connection
alternatively with / without integrated transducer
initial smallest measurable flow rate:
0.7 m³/h (diameter 25 mm)
terminal flow rate:
1130 m³/h (40 m/s in diameter 100 mm)
working temperature range:
-40° C... 180 °C
maximum working pressure:
up to 10 bar above atmospheric
materials:
stainless steel; hastelloy, titanium, tantalum
explosion-proof type of protection:
Category 1G, 1D (Zone 0, Zone 20); Category 2G, 2D (Zone 1, Zone 21)
special designs on request
====================================================
Compact units for use in Ex-applications:
for gas: Ex II 1/2 G Ex d e [ia] IIC T6 and
for dust: Ex II 1/2 D Ex iaD20/tDA21 IP6x TX
sensor for use in category 1 (Ex-zone 0 rsp. 20)
transducer housing for use in category 2 (Ex-zone 1 rsp. 21)
measuring tube inside diameter:
25 mm; 32 mm; 40 mm; 50 mm; 80 mm; 100 mm
flange connection
initial smallest measurable flow rate:
0.7 m³/h (diameter 25 mm)
terminal flow rate:
1130 m³/h (40 m/s in diameter 100 mm)
working temperature range:
-40° C... 180 °C
maximum working pressure:
up to 10 bar above atmospheric
materials:
stainless steel; hastelloy, titanium, tantalum
|
|
|
|
see the results for the following category : 
