|
|
RAD-CON Inc. specializes in bell-type batch annealing furnaces for the ferrous and non-ferrous, wire and strip industries. RAD-CON is a global leader in bell-type batch annealing technology, with installations worldwide.
RAD-CON has many years experience installing 100% Hydrogen Annealing systems. The RAD-CON design takes full advantage of the benefits of hydrogen, including cleaner product, shorter cycle times, lower utility costs, and greater production per base. RAD-CON is proud of its perfect safety record for hydrogen installations, and credits its redundant safety elements on the equipment and controls.
|
|
Chamber furnace 3 doors from 50 liters to 1000 liters
Annealing furnaces to room or pot of 500°c with 650 °c. A whole standard range of 20 liters to 1000 liters.
|
|
|
RAD-CON Inc. specializes in bell-type batch annealing furnaces for the ferrous and non-ferrous, wire and strip industries. RAD-CON is a global leader in bell-type batch annealing technology, with installations worldwide.
|
|
RAD-CON Inc. specializes in bell-type batch annealing furnaces for the ferrous and non-ferrous, wire and strip industries. RAD-CON is a global leader in bell-type batch annealing technology, with installations worldwide.
Our vacuum purge system rapidly reduces the contaminant levels to facilitate the brightest finish possible. Systems can operate using 100% hydrogen or a mixture of hydrogen and nitrogen to accommodate a variety of alloys. RAD-CON’s team of engineers, metallurgists, and technicians work closely with non-ferrous customers to support and optimize their cycles based on the needs of copper and brass annealing.
|
|
|
RAD-CON Inc. specializes in bell-type batch annealing furnaces for the ferrous and non-ferrous, wire and strip industries. RAD-CON is a global leader in bell-type batch annealing technology, with installations worldwide.
|
|
RAD-CON Inc. specializes in bell-type batch annealing furnaces for the ferrous and non-ferrous, wire and strip industries. RAD-CON is a global leader in bell-type batch annealing technology, with installations worldwide.
RAD-CON is the premier choice for Cold-Heading Quality wire producers. The 100% Hydrogen Super-High Convection™ system along with the AC/APEx™ atmosphere control system increase productivity while lowering operating costs. These innovative and proven technologies coupled with economical solutions to customers’ applications make RAD-CON the preferred brand for CHQ.
RAD-CON also services other steel wire processors. RAD-CON designs the best possible solution for specific annealing requirements based upon the customers’ needs. Providing 100% hydrogen systems, nitrogen systems, direct-fired furnaces or radiant-tubes, RAD-CON has a design for any situation.
|
|
Perfect furnace for delicate gas quenching treatments thanks to the rotative cooling ensuring an excellent cooling uniformity/span>
High cooling speed
Reduction of cycle time thanks to convective heating
Fully automatic process for a perfect reproducibility of the results
|
|
Annealing furnaces with a belt width range of 100mm up to 1200mm under controlled atmosphere for a variaty of applications are available. Belt furnaces are electrical or gas heated;
Annealing under 100% hydrogen for magnetic parts und temperatures up to 1220°C is also available as well as low temp. applications with neutral, reducing or controlled oxidizing atmospheres.
Atmosphere zoneing allows improved debindering or delubing; LED low energy dewaxing zone, recarburisation zone, quench cooling unit and convective cooling units can be part of a heat treatment line.
For more information, please contact:
SARNES ingenieure OHG
thermal solutions for powder metallurgy
Hindenburgstrasse 56
73760 Ostfildern, GERMANY
tel. +49 711 349205
fax +49 711 3482302
mailto:info@sarnes.de
http://www.sarnes.de
|
|
Chamber furnaces 1100° c
Standard product range from 50 to 2000 liters.
Furnaces with band or passage under atmosphere controlled with gas of protection. Standard range 3 sizes
|
|
The atmospheric chamber furnaces built by Ipsen have a modular design and are made of standardised assemblies. The furnace casing consists of a sturdy sheet steel structure.
The light-weight refractory lining inside the furnace is designed for temperatures well above the working temperature and has an extremely long service life.
Because of their modular design, our furnace systems can be customized as necessary to meet the client's specific needs. The ICTE® software family developed especially for the heat-treatment industry allows charge transfer, loading and unloading to be linked to provide fully automatic systems that can be integrated perfectly into the production flow.
|
|
We manufacture continuous belt furnaces under controlled atmospheres. Furnaces sizes ranges from lab size 100mm belt width up to 2 x 600 twin belt furnaces.
Furnaces are available in electrical and gas heated versions. LED (low energy dewaxing) delube zone, high temperature sintering zone, quench cooling and convective cooling units can be part of the heat treatment line.
Controlled atmosphere furnaces at tempertures up to 1220°C are made for special metallurical applications.
Annealing furnaces with a belt width range of 100mm up to 1200mm under controlled atmosphere for a variaty of applications are available. Belt furnaces are electrical or gas heated;
For more information, please contact:
SARNES ingenieure OHG
thermal solutions for powder metallurgy
Hindenburgstrasse 56
73760 Ostfildern, GERMANY
tel. +49 711 349205
fax +49 711 3482302
mailto:info@sarnes.de
http://www.sarnes.de
|
|
Ipsen offers a broad range of plants based on different design principles and built to the customer's specifications.
- Pusher-type furnace
- Rotary-hearth furnace
- Ring furnace
- Roller-hearth furnace
- Belt-type furnace
|
|
Drop Bottom Solution Heat Treat Furnaces
These Furnaces are designed for economical operation for a variety of uses including commercial heat treating, Military or Aerospace requirements and Automotive Aluminum uses.
Despatch is a proven supplier of Drop Bottom Solution Heat Treat Furnaces with over 150 similar units sold. By providing proven product designs that incorporate state-of-the-art features, full turnkey installation and start-up, Despatch has become a low risk supplier to the industry for this type of equipment.
STANDARD FEATURES:
- Delivered ready for production
- Simple, touch-screen operator control
- Economical for small part or low production runs
- Versatile down airflow minimizes temperature drop as doors open
- Excellent uniformity (± 5°F)
- Automatic operation
- Quench tank agitation standard
- Custom sizes available
|
|
SECO/WARWICK Vacuum Furnaces are designed for a broad range of equipment for heat-treatment processes including;
· Bright hardening
· High pressure gas quenching
· Vacuum carburizing/nitrocarburizing FineCarb
· Bright tempering
· Gas nitriding/nitrocarburizing (with vacuum purging)
· Bright annealing
· Solution annealing
· Degassing
· Brazing and high temperature brazing
· Diffusion bonding
· Sintering (VC, MIM, ceramics)
· CVD/graphitization
· Other processes /adaptations.
For
Aeronautics, Automotive Industry, Defense Industry, Metallurgy, Engineering, Medical Industry, Nuclear Industry, Tools, Research, we manufacture:
· Horizontal furnaces
· Vertical furnaces
· Bell furnaces
· Multi-chamber furnaces
· Continuous furnaces
With load up to 5000 kg
1. HPQ - "HIGH PRESSURE QUENCH TM" furnaces with horizontal loading of the charge, or VVP(HPQ) with vertical loading of the charge are designed for modern technology of heat treatment of low-, medium- and high-alloyed steels and alloys for which there is a need to use gas cooling (HPQTM) – hardening, with a pressure of cooling gas of 6, 10, 12 or 15 bar.
2. High vacuum VP and VVP(EH) furnaces 10-2; 10-5; 10-6; 10-7 mbar
3. Retort Tempering vacuum furnaces
4. VPC – vacuum sintering furnace for metal powder sintering for tool industry, medical, aircraft, defence and precise industry, etc.
5. Oil Quench Furnaces
Contact: Anna Bartel, +48 6838 20598; a.bartel@secowarwick.com.pl
|
|
Economical electric furnace SNOL 970/600 is designed for thermal treatment of various materials and components under 600ºC temperature, e.g. drying, preheating and other similar purposes.
• Circulation fan
• Working chamber made of stainless steel
• Microprocessor temperature controller
• Two shelves
• Two air bolts on the furnace ceiling
• Powder painted exterior
• High quality thermoinsulation materials
• Low power consumption
• One year limited warranty and later service
• Two years limited warranty and later service for temperature controller
|
|
PVD coating machine with a simple and compact design
Realisation of the common thin layers at the best economic conditions
Fully automatic operation for easy use and reproducibility of the results
Possible set up in controlled atmosphere zone for an optimal coating quality
|
|
The technical design of the chamber furnace sealed quench CASEMASTER® type, introduced to the market by ELTERMA S.A. provides:
- automation of the heat treatment and heat-chemical treatment processes
- repeatability of the processes
- elimination of skin decarburization of the workload surfaces after heat treatment and heat-chemical treatment processes.
Chamber furnace with integral quenching tank CASEMASTER® is available in the following versions:
- Single door and pass-trough furnaces
- One and two-chamber furnaces
- Electrical furnace and gas fired furnace.
For the controlling of operation of the CASEMASTER® furnaces and technological lines based on them, the computer system is used which, besides its standard functionality in the heat treatment additionally realize following tasks:
– Calculation of the carbon diffusion in carburizing process in „on-line” mode
– Calculation of parameters of furnace atmosphere on the mathematical model of the chamber of the furnace
- Function of technological diagrams (current profile of concentration of carbon, expected hardness profile after hardening, current state of the process on the diagram iron - carbon and iron oxidation)
- Programming overhaul.
|
|
RAD-CON Inc. specializes in bell-type batch annealing furnaces for the ferrous and non-ferrous, wire and strip industries. RAD-CON is a global leader in bell-type batch annealing technology, with installations worldwide.
In many applications the requirements for sintering can be performed more economically with a bell-type batch annealing furnace. Please contact RAD-CON with specific project requirements
|
|
Belt furnaces for sintering under controlled atmospheres, carbon content controlled up to temperatures of 1150°C. Either electrical or gas heated homogenous temperture profile and atmosphere zoneing for delubing, sintering and hardening are proofed features for all our 100mmm up to 2 x 600 (twin belt) belt width furnaces.
SARNES ingenieure OHG
thermal solutions for powder metallurgy
Hindenburgstrasse 56
73760 Ostfildern, GERMANY
tel. +49 711 349205
fax +49 711 3482302
mailto:info@sarnes.de
http://www.sarnes.de
|
|
Annealing furnaces with a belt width range of 100mm up to 1200mm under controlled atmosphere for a variaty of applications are available. Belt furnaces are electrical or gas heated;
Annealing under 100% hydrogen for magnetic parts und temperatures up to 1220°C is also available as well as low temp. applications with neutral, reducing or controlled oxidizing atmospheres.
Atmosphere zoneing allows improved debindering or delubing; LED low energy dewaxing zone, recarburisation zone, quench cooling unit and convective cooling units can be part of a heat treatment line.
For more information, please contact:
SARNES ingenieure OHG
thermal solutions for powder metallurgy
Hindenburgstrasse 56
73760 Ostfildern, GERMANY
tel. +49 711 349205
fax +49 711 3482302
mailto:info@sarnes.de
http://www.sarnes.de
|
|
Tempering ovens, series VAW
Air circulation and tempering furnaces for unstressing, annealing, tempering, ageing, sintering or burning-off of organic residues on metal parts. Considerable accessories available, suitable also for use with inert gas
Working chamber volume from 200 litres
Temperature 500 °C, 650 °C and 750 °C
Air flow horizontal
|
|
|
Carburizing, carbonitriding, bright hardening and carburization-free bright annealing is performed with carbon-controlled atmospheres. These are produced using low-energy process systems that operate to high safety standards. Process control is based on the Carbon-Sensor® along with computer-aided instrumentation and control systems of the Carb-o-Control® series.
|
|
Technical data :
Types : 1/1050S 3/1050M
Max. Temperature : 1050°C 1050°C
Frequency : 50Hz 50Hz
Voltage : 230V 3x400V
Power : 2 kW 6,5 kW
Weight of the furnace : 116 kg 450 kg
Inside dimensions : W 85mm W 150mm
H 40mm H 60mm
D 300mm D 300mm
External dimensions : W 500mm W 850mm
(±10%) H 700mm H 1500mm
D 700mm D 1200mm
Capacity of the tank : 40 l 320 l
Equipment :
- Metallic casing containing the insulated ceramic fibre (according to directive 97/69/EC) capable of reducing the thermal losses.
- Heating chamber, sliding muffle and base in refractory steel.
- Sliding base and muffle by tilting.
- Lever arm for tilting the furnace.
- 2 regulating cocks for the gas treatment.
- Digital temperature control unit.
- Oil quenching tank made in stainless steel fitted with a funnel, extraction basket and oil drain cock.
- On demand: extraction basket made of fine grid.
|
|
FineCarb vacuum carburizing technology has been intensively developed for a number of years by SECO/WARWICK in collaboration with the Materials Engineering Institute of Lodz Polytechnic in Poland. Recently the company has initiated or is in the process of supplying a dozen or so installations, among which are:
- Several single-chamber NVPT vacuum furnaces for, among others, two hardening plants in Italy, as well as companies in Turkey, the USA, Slovenia and Poland. In addition, further single-chamber NVPT vacuum furnaces have been or will be supplied to a Wallwork Heat Treatment hardening plant in the UK and the Bauman Institute in Moscow, Russia;
- A dual-chamber furnace with a ColdKam chamber for a USA-based customer. The furnace was fitted with a 20-bar gas cooling system, which together with the processing chamber is adapted for the construction of SECO/WARWICK ‘multi-chamber’ type systems;
- For a well-known company in the USA, a dual-chamber furnace with oil bath for the vacuum carburizing and hardening in quenching oil of gear wheels with a mass of 5000 kg. The furnace has a processing chamber of f 1800 x 2500 mm.
Contact:
Anna Bartel; +48 6838 20598; a.bartel@secowarwick.com.pl
|
|
With Ipsen's vacuum furnaces the advantages of vacuum heat-treatment can be used to the full. These include:
- optimum hardness
- bright surfaces
- oxidation and decarburisation-free surface zone
- little scaling, even on workpieces with a complex geometry
- constant qualities
- reproducibility
- usable for a broad range of materials
|
|
Furnace especially adapted for brasing and degasing as well as annealing and ageing
Excellent thermal homogeneity
Very simple conception and robust design for low maintenance and assuring an excellent reliability
Available also with metallic insulation for high quality vacuum treatments
|
|
Perfect furnace for delicate gas quenching treatments thanks to the rotative cooling ensuring an excellent cooling uniformity/span>
High cooling speed
Reduction of cycle time thanks to convective heating
Fully automatic process for a perfect reproducibility of the results
|
|
Multipurpose oil and gas quenching furnace with two chambers
Compact system for minimum space requirement
Gas quenching possibility allowing the treatment of huge grade of steel
Heating chamber held in temperature for important energy saving
Fully automatic handling system by deformable parallelogram and telescope
|
|
Tempering furnace ensuring an excellent temperature homogeneity and reduced cycle time
Respect of the load surface
Low dead load and strong insulation for energy savings
Robust construction limiting maintenance costs
Compact design minimizing the floorsurface
|
|
|
