|
|
-Large convection surface
-Clip fixing
-Ready for use
-Maintenance free
Compact convection heater for use in areas with explosion hazard for prevention of formation of condensation, temperature fluctuations and for protection against frost in transmitter housings, switch cabinets and measuring equipment.
Ex protection type:
-Ex d IIC T5 - Ex tD A21 IP6X T100C
-EX d IIC T4 - Ex tD A21 IP6X T135C
Conformity certificate:
-01 ATEX 6073/03, LCIE N 06 ATEX Q8011, IECEx LCI 07. 0020
|
|
Heatflon Serie PH 1 - 9
Heatflon heaters of the PH series consist of a stainless steel tubular radiator sheated in PFA. The head of the heater is made of PTFE and the connecting cable of PFA. Heating zone, head and connecting cable are welded together watertightly as a result a complete immersion in aggresive media is possible.
All devices of the PH series are earthed and approved by association of German engieers (VDE).
As an optional extra, all heaters can also be pre-equipped for a thermal monitoring. Users who purchase a special controller are then able to monitor the internal temperature between the stainless steel heater and the PFA tube, thereby reducing substantially the risk of fire. Heatflon tubular radiators of the PH series are available for various surface loads, eg:
2,2 W/cm - 1,5 W/cm - 1,0 W/cm, applicable dependent on the specific media.
|
|
|
Tubular heating helement use consolidated and established technologies utilising a spiral of resistive wire immersed in MgO compressed and protected by a metallic sheath. Tubular heating elements after annealing can be shaped to many geometries depending on the heating needs and foot print available
|
|
Electric immersion heaters are especially suitable for heating fluids via natural or forced convection. They are mainly used for water heaters, heating tanks and for fluid circulation heaters.
Depending on the application, they exist in different materials.
Their layout of heating elements allows an optimum heat exchange.
|
|
Watlow, a leading designer and manufacturer of heaters, controllers and temperature sensors, has added a miniature version cartridge heater to its existing line of FIREROD cartridge heaters. The new 1/8-inch FIREROD cartridge heater features a unique swaged design, which maximizes heat transfer and allows for quicker response time. Additionally, its helically wound resistance wire produces higher watt densities and contributes to longer service life in space-restricted applications.
Applications
Medical
Analytical
Aerospace
Semiconductor
|
|
Thermofoil heaters are thin, flexible heating elements consisting of an etched foil resistive element laminated between layers of flexible insulation. Since their introduction by Minco over 45 years ago, Flexible Thermofoil heaters have demonstrated significant advantages over conventional electric heaters.
Precise Heating :
Thermofoil heaters put heat where you need it. You simply apply them to the surface of the part to be heated. Their thin and Flexible profile gives close thermal coupling between the heater and heat sink. You can even specify profiled heat patterns with higher watt densities in areas where heat loss is greater.
|
|
The flexible heating foil is the result of printed circuit technology (etched foil) and was developed in order to solve specific problems in advanced market sectors such as the space and aviation fields. In a relatively short time, the heating foil has found applications in many other fields, allowing users to solve problems of particular importance thanks to the following characteristics:
- Can be set to vary heat concentrations to optimize distribution
- Minimum heat dispersion in case of external application on the object to be heated
- Can be molded
- Easy to assemble
- Overall economical in many applications
- Minimum weight and thickness:
Mica 0,9 mm
Polyimide 0,15 mm
Silicone 0,8 mm
Poliestere 0,15-0,25
Teflon 0,8 mm
- Flexibility
- Working temperature:
Mica max working temperature 500 C
Polyimide max working temperature 260 C, with adhesive 175C
Silicon max working temperature 200 C, with adhesive 175C
Polyester max working temperature 100 C, with adhesive 100C
|
|
The multicell heater from Watlow offers independent zone control for precise temperature uniformity, loose fit design for easy insertion in and removal from the equipment and extreme process temperature capability. The heaters are available with up to eight independently controllable zones and one to three internal thermowells for removable sensors. Custom assemblies are available.
Applications
Super plastic forming and diffusion bonding
Hot forging dies
Heated platens
Furnaces applications
Superheating of air and other gases
Fluidized beds for heat treating
Glass forming, bending and tempering
Long heater needs (1219 cm (40 feet))
Soil remediation
Aluminum processing
|
|
-Pressure clamp connectors
-Dynamic heating up
-Wide voltage range
-Temperature limiting
-Energy saving
-Clip fixing
-Quick installation
These heaters are used in enclosures where damage from condensation must be prevented, or where the temperature may not fall below a minimum value.
The aluminium profile heater body design has a chimney effect and distributes the heat evenly.
The pressure clamp connectors save time and simplify installation.
|
|
Technical details
- Protection class I - protection type IP 20
- Fan features:
- constant
-Mounting position: Air outlet, top or side
- Connection:
Connecting terminal 0,08-2,5mm
- Fastening:
Snap fitting DIN rail
- Off blow temerature: 120C
- Case temperature: 45C
|
|
-Compact heater
-Heating capacity adjusts to ambient temperature
-Adjustable temperature range
-Temperature safety cut-out
-Clip fixing
-Optical indicator
Semiconductor fan heaters prevent the formation of condensation and ensure an even temperature in switch and control equipment.
The built-in regulator is used to set the desired temperature.
Approvals: UL File Nr. E 204590
|
|
Heatflon Series H
Heating Panels made from PTFE
Heatflon heating panels have primarily been developed for heating aggressive liquids by means of an electrical heating process as applied in electroplating, semi-conductor and laboratory technology and chemical engineering. Their flat design makes them comparatively space-saving.
Areas of application :
The use of the fluoroplastic PTFE for all components having contact with the electrlytes provides the heating panel with an outstanding chemical resistancem, rendering it suitable for use in virtually all electroplating baths .
The excellent anti-adhesive properties of the fluoroplastic PTFE largely eliminate deposits and render cleaning very simple.
|
|
|
As the leader in electric heating elements and sensors, Fast Heat offers a variety of quality strip heaters. Strip heaters can be used in a variety of applications from food warming to packaging machinery. Fast Heat strip heaters are also available in a variety of configurations from finned strip heaters, to dissipate heat to high temperatures heaters capable of 1400 degrees Fahrenheit.
|
|
Watlow's mica and 375 strip heaters are the versatile solution for a number of applications. They can be bolted or clamped to a solid surface for freeze and moisture protection, food warming and other applications. The 375 finned strip heaters are commonly used for air heating, drying ovens and space heaters.
Applications
Dies and molds
Tank and platen heating
Thermoforming
Packaging and sealing equipment
Ovens
Food warming equipment
Vulcanizing presses
Duct, space and air heaters
Incubators
Autoclaves
Freeze and moisture protection
|
|
Applications:
Heating of pipes, containers, pumps, filter, flanges, connections of the heating hose.
|
|
Watlow layers thick film resistor and dielectric materials on quartz, stainless steel and ceramic substrates to produce high performance industrial heaters. The thick film heaters provide very fast temperature response and uniformity on a low-profile heater. Thick film heaters are ideal for applications where space is limited, where conventional heaters can't be used, when heat output needs vary across the surface, or in ultra-clean or aggressive chemical applications.
Applications
Ultra pure aggressive chemicals
Large panel processing
Analytical equipment
Foodservice equipment
Packaging sealing equipment
Life science sterilizers and GC/mass spectroscopy
Semiconductor wafer equipment
Plastics hot runner nozzles and manifolds
Thermal Uniformity and Fast Response
Series 400 Stainless Steel
Thick film on stainless steel provides low profile heating with the ability to be laser cut or machined to fit any CAD-generated, two dimensional shape.
Stability and Fast Response
Ceramic
Ceramic substrates provide low thermal expansion, high temperature tolerance, low dielectric constant, rigidity and dimensional stability for thick film applications.
In-Line Quartz
In-line Quartz
In-line quartz heaters are ideal for use in continuous and intermittent flow aggressive chemical applications. This unique quartz resistive heater module design eliminates process contamination risk in the event of heater failure.
Corrosion Resistance with a See-Through Option
Flat Quartz
Thick film on quartz substrates provide a low-profile heater that can be cut to fit applications requiring corrosion resistance, high thermal density and visibility.
|
|
Tubular heating helement use consolidated and established technologies utilising a spiral of resistive wire immersed in MgO compressed and protected by a metallic sheath. Tubular heating elements after annealing can be shaped to many geometries depending on the heating needs and foot print available, their advantages are:
- High reliability at higher temperatures
- High mechanical and chemical resistance
- can be "finned" (providing extended surface areas enabling quicker heat exchange for the same diameter of resistance)
- Large range of power, tension, shape, and dimensions.
- Junction boxes and connections also in waterproof and explosion-proof execution
- Uses for regulation and safety devices, electronic or electromechanical
- Sheath material suitable with the application:
AISI 304,316,321,309
INCOLOY 800,825
INCONEL 600
TITANIUM
COPPER
CARBON STEEL
SPECIAL MATERIALS
- Easy installation guaranteed by a large range of fixing systems:
Standard customised flanges
Plugs 1"-1"1/4- 1"1/2- 2"- 2"1/4- 2"1/2
Connectors ISO- GAS
|
|
We can produce all kind of metal shielded tubular heater according to your requirements.
We produce heaters for washing machine, dishwashers, water heater, oven heaters, tea set heaters, etc.. oil and industrial heaters.
|
|
|
Tube heating elements meat nearly all heating requirements, as well immersed in fluid as in moving air or moulded resp. pressed in solids. The output rating is function of the surface loading and measured in W/cm2 heating surface.
|
|
Heatflon Serie PH 1 - 9
Heatflon heaters of the PH series consist of a stainless steel tubular radiator sheated in PFA. The head of the heater is made of PTFE and the connecting cable of PFA. Heating zone, head and connecting cable are welded together watertightly as a result a complete immersion in aggresive media is possible.
All devices of the PH series are earthed and approved by association of German engieers (VDE).
As an optional extra, all heaters can also be pre-equipped for a thermal monitoring. Users who purchase a special controller are then able to monitor the internal temperature between the stainless steel heater and the PFA tube, thereby reducing substantially the risk of fire. Heatflon tubular radiators of the PH series are available for various surface loads, eg:
2,2 W/cm - 1,5 W/cm - 1,0 W/cm, applicable dependent on the specific media.
|
|
|
Watlow's WATROD tubular heater elements and flat FIREBAR elements are designed primarily for direct immersion in liquids such as water, oils, solvents and process solutions, molten materials as well as air and gases. By generating all the heat within the liquid or process, these heaters are virtually 100 percent energy efficient. These versatile heaters can also be formed and shaped into various geometries for radiant heating and contact surface heating applications. UL and CSA component recognized elements available.
|
|
Heaters
Voltage: AC 220V
Power: 50W, 75W, 100W, 150W, 200W, 300W, 500W
Power frequency withstand voltage: 2kV
Operating life: 5 years
Temperature & humidity controllers
Power supply: AC220V}10%i50HZj
Withstand voltage: 2 kV
Controlled temperature precision: }1
Action humidity point: 93%RH or 80%RH
Range of target temperature: 5~15
|
|
Switchgear cabinet heater for highly combustible ranges
Gas zone 2, dust zone 22
Tension: 230V
Achievements: 70W - 400W
Safety class system I (protective grounding) - enclosure IP 67
Installation position: Perpendicularly
Fitting: Silicone cable 3X1,5mm , 1m long
Mounting options: DIN slides attachment, bolt mounting
|
|
PTC Schaltschrankheizung
Types: P-ssm-Al, P10, P25, P65, P80
Tensions: 12V - 48V, 110V - 265V (wide rank)
Achievements: 10W - 300W
Safety class system II (protective grounding) - enclosure IP 54 (DK = IP 20)
Temperature behavior:
- self-regulating in dependence of the ambient temperature
- dynamic heating
Z.T. Exhaust for better air distribution mountable
Partly 2 connection types
Connecting cable (AL) with silicone cable 2X0,75 mm
Execution clamp (DK) 0.08 - 2.5 mm
Installation position perpendicularly
3 mounting options (alternatively)
Bolt mounting
DIN slides attachment
Attachment by means of thread groove
|
|
Low surface temperature
Quick mounting due to clip fixing
Double insulated (plastic)
Wide voltage range
Small size
Compact heater for the use in enclosures with electrical/electronical components. The design of the heater supports the natural convection which results in a high air-current of warm air.
The surface temperatures on the accessible side surfaces of the housing are kept down as a result of the heater design.
Our complete range of thermostats and hygrostats can directly be connected to the heater CS 060.
This heater is also available in a version with plug-in thermostat requiring no additional wiring (CSF 060).
Both versions are designed for permanent operation.
|
|
Low surface temperature
Integrated thermostat
Quick mounting due to clip fixing
Double insulated (plastic)
Wide voltage range
Small size
Compact heater for the use in enclosures with electrical/electronical components. The design of the heater supports the natural convection which results in a high air-current of warm air.
The surface temperatures on the accessible side surfaces of the housing are kept down as a result of the heater design.
This model with plug-in thermostat does not require additional wiring.
The heaters are designed for permanent operation.
This heater is also available in a version without thermostat (CS 060).
|
|
Switchgear cabinet heating waterproof
Types: Wadi IP 65-AL, Wadi LH IP-65-AL
Tensions: 115V - 500V
Achievements: 180W - 380 W
Safety class system I (protective grounding) - enclosure IP 65
Temperature attitudes:
A 25C (35C) - from 55C (65C) (Eigentemperatur)
Other attitudes on request
Connection types:
Connecting cable (AL) 0,5m 3 x 0.75 mm PVC
Other lengths on request
|
|
- Rugged stainless clamping band holds heater tight for maximum heat transfer
- Nickel/chromium resistance ribbon for uniform heat distribution
- Tybe B leadwires:
- U.L. Recognized rating
- Continuous 450C service
- 12" leads
- High emissivity sheath:
- Aluminized steel/td>
- Temperature range to 900F
- Rust resistant
- Mica insulation:
- Uniform thickness
- Moisture resistant
- Excellent electrical insulation
|
|
|
