Heaters

Power: 250 W - 8,000 W
Temperature: 350, 100 °C

Watlow’s new FLUENT in-line heater is a small, lightweight, high-performance heater that can replace both a traditional immersion type heater or a heater wrapped around ...

Power: 0 W - 1,000 W
Temperature: 200 °C

... WATROD enclosure heaters are designed to prevent freezing and condensation in electrical and mechanical housings. The WATROD heater element is enclosed in a perforated, aluminized-steel bracket to prevent ...

Power: 0 kW - 225 kW
Temperature: -29 °C - 650 °C

Watlow duct heaters are constructed of sturdy 0.430 in. (11 mm) diameter WATROD heating elements mounted to a 1⁄4 in. (6 mm) thick steel flange. These air duct heaters are easily adapted ...

Power: 235 W - 800 W

PTC heater with fan, continuous thermal output 235 - 800 W, and quick-connect terminal.

Power: 8 W - 150 W

PTC heater without fan, continuous thermal output 10 - 150 W, with quick-connection terminal.

Power: 3,000 W
Temperature: 20 °C - 650 °C
Pressure: max 1.0 bar

... optimal air heater for production processes. Our air heaters are durable and suitable for continuous operation, for example in production machines. There are two versions of the air heater ...

Power: 1,800, 2,400, 3,000, 3,600 W
Temperature: 20 °C - 650 °C
Pressure: max 1.0 bar

... 3000 industrial air heater produces constant hot air in continuous operation. Despite providing strong hot air performance, the small and lightweight air heater enables integration into expert production ...

Power: 3,000, 5,000, 5,100, 6,000, 7,500 W
Temperature: 20 °C - 700 °C
Pressure: max 1.0 bar

... industrial air heater type 5000 continuously produces hot air at a constant temperature. The compact and lightweight air heater enables integration into professional production processes despite its high ...

ATTSU RVE Electric superheated steam heater ATTSU RVE Electric superheated steam heater is used in certain processes which require superheated steam, therefore steam boilers are equipped with steam superheaters ...

Power: 100 W - 10,000 W

Heating / cooling units ZGH type are heaters used to plasticize plastics. The construction of the extruder is based on ceramic heating inserts equipped with brass / steel heat sinks, ...

Power: 20 W - 40 W

Compact heater for the protection of electrical and electronic components in enclosures. Its design ensures great convection resulting in excellent heat dissipation. A touch-safe plastic cover provides for low surface ...

Power: 10 W - 50 W
Temperature: -45 °C - 70 °C

Compact heater with PTC heating elements for heating enclosures with electrical or electronic components. The heater prevents too low temperatures and thus condensation ...

Power: 50 W - 150 W
Temperature: -45 °C - 70 °C

Compact loop heater for heating enclosures with electrical and electronic components. Its design ensures great convection resulting in excellent heat dissipation. Touch-safe plastic housing minimises ...

Power: 650 kW

In line water heaters (a.k.a circulation heaters) are ideal for processing fluid, including hazardous liquids, that requires intermediate heating while maintaining a flow rate. Instead ...

In line water heaters (a.k.a circulation heaters) are ideal for processing fluid, including hazardous liquids, that requires intermediate heating while maintaining a flow rate. Instead ...

Circulation Heaters, also known as “in line heaters,” have uses in many applications. They can use steel, stainless steel, or titanium depending on the application. Lube oil and waste oil applications ...

Power: 350, 700 W
Temperature: 80 °C

These types of contact heaters have been designed and manufactured for preheating and maintaining the oil temperature constant in air-cooled endothermic engines. They are in fact applied in contact under the oil sump. ...

Power: 80, 90 W
Temperature: 80 °C

... contact heaters are designed and manufactured for preheating and maintaining a constant oil temperature in the air-cooled endothermic engines. They are in fact applied in contact under the oil sump. An adjustable thermostat ...

Power: 0 kW - 2 kW
Temperature: 650 °C
Pressure: 0 bar - 6 bar

Housing made from stainless steel; connection chromedbrass Length of the connection cable and thermocouple line 1,5 mtr. Air hose available per meter Other voltage available on request 24 month warranty (except wear parts)

Power: 0 kW - 1 kW
Temperature: 0 °C - 600 °C

The short one for direct installation! With mounting thread directly in the housing. Smallest installation height despite air hose with internal connection line. The perfect device for confined spaces and installation positions. Voltage ...

Power: 0 kW - 1 kW
Temperature: 600 °C

Different voltages, power and special versions, such as external activation via controller or SPS possible. Available on request!!! Special accessories on request!!! - 24 month warranty (except wear parts) Voltage [VAC] ...

Power: 1 kW - 6 kW
Temperature: 0 °C - 280 °C

Standard power, size and shape or as indicated by the customer. TYPE OF MICANITE: WORKING TEMPERATURE: MAX 280°C Armour in stainless steel or ALUSI sheets Internal insulation in micanite Resistive wire* internal insulating

Nozzles heaters Standard power, size and shape or as indicated by the customer. Insulated resistive wire* inside. Power cable with METALLIC BRACELET Materials of construction: BRASS STAINLESS STEEL MICANITE ...

Power: 250 kW - 9,300 kW
Temperature: 300 °C

... economical in places where corrosion risk is not desired and very high temperature heating fluid is used. Corrosion is negligible so it has a long life. The system is safe as it is unpressurized. It ...

Power: 20 kW - 80 kW
Temperature: 20 °C - 200 °C

... With the aid of the blower, it’s released from the upper exit into the drying or heating area. Then, the cooled air flows through the lower air exit for additional heating and continuous circulation. ...

Power: 5 kW
Temperature: 60 °C

The ZL-2 steam air heater comprises seven components: radiant fin tube of steel and aluminum + electrical steam valve + overflow valve + heat isolation box + ventilator + Fresh air valve + electrical control system. It ...

Power: 80 W
Temperature: 30 °C
Pressure: 0 bar - 100 bar

... electrical heating block, which is connected to an annexed temperature limiter additionally. Technical data Medium: all non-aggressive gases and liquids Nominal size: DN 8 Nominal voltage: 110÷265 VAC, 50 Hz Temperature ...

Power: 1 kW - 90 kW
Temperature: 0 °C - 90 °C

• For the pre-heating of hydraulic oil, heating oil or other hard-infl ammatory agents • The fl uid to be heated is lead through a heating element bundle with the aid of baffl es • With pre-determined ...

Power: 400 W - 4,900 W
Temperature: 0 °C - 85 °C

... voltages on request SERIES PTHK 90 • Exchangeable ceramic heating insert (mounting / dismounting possible without oil drain) • Protection class IP 65 SERIES PTHK 92 • Exchangeable ceramic heating ...

Power: 125 W - 1,000 W

... diesel, heating and vegetable oil (for other fluids, e.g. HFC, please contact HBE) ASSEMBLY INFORMATION • Fixing of the heater by magnetic clamps either horizontally at the tank bottom or vertically ...

Power: 3,000, 2,000, 1,000, 500, 5,500 W
Temperature: 200, 140, 350 °C
Pressure: 0 bar - 10 bar

... to 15 bar max. They are fitted with a screw plug immersion heater and a safety thermostat. Fluid circulation heaters can be connected hydraulically in series, which allows a very large heating ...

Power: 2 kW - 24 kW
Temperature: 0 °C - 300 °C
Pressure: 0 bar - 15 bar

To heat water, fuel or oil circulating in pipework up to 15 bar max. These heaters are made of one or two DN 50 vessels in painted carbon steel, M45 screw plug immersion heaters, and a safety thermostat ...

Power: 2,000, 4,500, 6,000 W
Temperature: 300 °C

... maximum pressure. Consisting of a DN 80 vessel in painted Steel, 0 77 screw plug immersion heater and a 300°C adjustable safety thermostat. Stainless Steel heating éléments. Wall mounting by means of ...

Known for its versatility , ruggedness and dependability , tubular heaters can virtually be factory-configured to suit a variety of industrial heating applications. Sheath Material : Copper, Steel, ...

Power: 2,000 kW

Duct heaters are heat transferring devices which are an assembly of heating elements mounted in a frame or duct. Preferably used for non-pressurized air-heating systems, there are three types of duct ...

Circulation heater is a combined unit of Electric heater bundle inserted inside a Pressure vessel or shell, in which fluid will be flowing continuously. It is a compact heating system ...

Temperature: 500 °C

Chip heaters made of silicon nitride are normally rectangular. Various dimensions and batch sizes up to our die diameter of 400 mm can be produced. The special properties and the low mass of ceramic allow fast heating ...

Power: 0 kW - 10,000 kW
Temperature: 340 °C
Pressure: 0 bar - 15 bar

Pirobloc designs, manufactures and installs customized suction heaters based on the needs of each customer and project. Our suction heaters are supplied with all nozzles for the thermal fluid inlet ...

... while heating enables pumps and stirrers to be easily employed. The Thermosafe is IP66 rated, so can be hosed down, even when operational, in complete safety. For more informations about the THERMOSAFE® Induction Heater ...

... container heating products. Our steadfast THERMOSAFE® Induction Heater has dominated the market for 30 years and is still the safest, most efficient and most reliable drum heater in ...

Power: min 90.0 W
Temperature: min 20.0 °C

Many power, voltage, material and control options available. All products manufactured to short lead-times. Indoor and Outdoor styles. Can be designed to meet UL/CSA standards, ATEX, IECEx etc. For more information contact LMK Thermosafe

Temperature: 450, 550 °C

FAK/FMK aluminium/brass compact Tool Heaters are used with machinery and tools of the polymer processing industry as well as with other devices with uniform heat demand. closed/melt dense construction shape fulfilling ...

Cast Heaters are used within polymer and rubber processing industries (extrusion). Furthermore they are suitable for screen-changers and filter systems, for extrusion tools, for foiling and blow moulding machinery, for ...

Air Heaters and Finned Tubular Heaters are used for the heating of air, non-flammable gases and steams, for ventilation and air conditioning devices, construction of apparatus, in drying ...

Power: 4 kW

Strip heaters to fix on flat surfaces. Models with fins to air and gases heating. Materials: aluminum, zinc coated steel with mica insulation, stainless steel with mica insulation, aluminized steel with refractory ...

Power: 6 kW

Flexible heaters to fix on any type of surface, with uniform power distribution. Flexible heating hoses with different diameters and terminations as well as accessories for heating ...

Termya offers a wide variety of heating cables for fast and efficient heating. Thanks to their flexibility they are conformable and adaptable to a large number of applications, from avoiding condensations to processes ...

Temperature: 40 °C

... operating points in the process. Electrical process heaters directly heat fluids, converting electrical energy in the heating rods to thermal energy. The thermal energy is then transferred from the ...

... application. There are faster or slower heating elements, mechanically robust or more filigree designs. Also, a distinction is made between compacted heating elements and heating elements ...

Temperature: 40 °C

... flow-type heaters can be designed for mobile operation, on structures similar to hand trucks for smaller powers, on racks for larger powers. Thus, the electrical heater can easily be moved from place ...

Temperature: 0 °C - 390 °C
Pressure: 0 bar - 39 bar

... Steam Air Heating Solutions Our steam air heater is a reliable and efficient solution for heating air in industrial processes. It is designed to operate with steam at a maximum pressure ...

Power: 25 W - 800 W
Temperature: 450 °C - 550 °C

... damage. For higher temperatures of up to 1100°C our high-temperature ceramic heaters are used. * Thermal shock refers to the destruction of a solid object due to rapid heating or cooling, as the ...

Power: 5, 3, 6 kW

• Wide range of shapes and power available • Always in stock (subject to prior sale)