|
|
|
A&N gas line and pump line heaters are designed to prevent condensable gases from clogging your vacuum system process piping. These products are commonly used in semiconductor (IC chip) manufacturing applications. However, our heater products are ideal for any application that requires uniform and controllable process pipe temperatures.
|
|
These appliances are used to heat circulating fluids such as water, fuel oil, as well as air or gases in general at up to 15 bar max.
They are fitted with screw plug immersion heater, flange immersion heater or high flux rods.
Temperature sensors and controlers can control the temperarure of the flow and safety devices protect against over temperature.
Fluid circulation heaters can be connected hydraulically in series, which allows a very large heating power to be achieved.
|
|
|
Clean Water Heaters are ideal for heating municipal water for industrial washing and rinsing processes. Sturdy 0.475" diameter copper sheath elements provide superior strength and rigidity. Chromalox elements utilize high quality resistance wire for coil construction. All stock and assembly stock heaters come with mechanical AR thermostats. These thermostats are suitable for most applications. Explosion-resistant and liquid-tight thermostats are provided on E2/E3 and E4 units, respectively. Other applications include indirect heating of viscous liquids and temperature maintenance of storage tanks.
|
|
ompact immersion tube
integrated in tanks
THERMAL FLUID PREHEATER
The loop heater enables the temperature of the loop of a fluid to be maintained, the temperatures of which may vary up to 250 °C depending on the thermal fluid used. The use of the compact immersion tube in this application enables a very high degree of efficiency.
MAIN BENEFITS :
Energy savings
Avoids using a steam boiler
Design temperature up to 250 °C, depending on the thermal fluid (heat-transfer fluid) used.
The very low volume of fluid enables the temperature to be reached very quickly.
Energy decentralisation
Low overall dimensions
Ease of use
Autonomous equipment
USE:
Food industries:
Replaces steam
Heating of various tanks and tunnels (pasteurisation, frying and scalding)
Production of sanitary hot water
Market gardening industries:
Heating various baths
Metallurgical industries:
Vacuum evaporator / concentration of solutions
Heating of various baths
Industrie chimique :
Cosmetic decoction baths.
|
|
At ECAS, we are expert manufacturers of crankcase heaters.
The BCC it's an electricserial resistance protected with a metal braid, fixed to a flexible strap with an adjustable traction device which allows the crankcase heaters to be adapted easily to the object to be warmed.
Specially designed for the controlling and maintaining the temperature of compressors, boilers, storage tanks, etc.
Insulation resistance: 100 mega ohms min. at 2,500 V
Connection outlet: hose 3 x 0.75mm² - 1m
Tolerance W: ±10%
|
|
U.L. Recognized - Guide SEOT2, file SA4093 for use in air conditioning equipment.
C.S.A. Certified - Guide 165-E-90, file 016386-0-000 for use in air conditioning equipment.
Applications:
Crankcase heaters are used to overcome the problem of migration and condensation of refrigerant in the crankcases of compressors used in air conditioning and heat pump systems.
They are designed to keep the crankcase oil at a temperature higher than the coldest part of the system to prevent migration.
Features:
Hotwatt Crankcase Heaters are constructed of the highest quality corrosion
resistance materials and sealed against moisture.
The following list Hotwatt Crankcase Heaters by the OEM manufacturer. In addition, custom designed crankcase heaters and variations to the units shown are also available.
|
|
In ECAS we manufacture heating blankets and heating bands, for the control and maintenance of the temperature of drums and containers.
Models BFVFV and BFVIBC: Consists on an electric flexible resistance placed in a blanket or band, manufactured with fabric of glass fiber.
All our heating blankets and bands, controls and regulates the temperature with a thermostat recommended due the requirements of each project.
We manufacture blankets and bands for drums from 25 to 200 litres, and containers IBC of 1000 litres, but we also fabricate custom blankets.
Drums: of 200,100, 50 and 25 Litres
IBC container: 1.000 Litres
Power (W):
Drums 200 L: 750 W, 1.000 W, 1.500 W
Drums 100 L: 750 W
Drums 50 L: 300 W
Drums 25 L: 200 W
IBC Container of 1.000 L: 2.000 W
Range temperature: 0 - 80 ºC
Types of fasteners: Velcro. Plastic buckles or clasps, Grommets
Application
Heating of drums, storage tanks, Instrumental of laboratory, etc.
|
|
|
Heating sleeves to heat segments of 200 litre barrels per DIN. both the inner and the outer sheath of the barrel heating sleeve are made of aluminium sheet, which ensures maximum protection of the electrical components against mechanical damage. A hinge with campling closure that divides the heating surface into two semi shells permits convenient assembly, without the heating element needing to be bent. The barrel can be heated complete by using 3 sleeves.
|
|
Insulated Flexible Heating jackets for containers and drums from 20 litres up to 1200 litres in size.
High grade insulation combined with a range of custom coated fabrics allow us to offer a performance specification from "winter warming" anti-freeze applications through to melting of solids from 200 litre drums.
Power ratings are suitable for both plastic and steel containers.
The jackets are easily fitted and removed using click-in buckles and straps, and can be handled safely even after use due to the outer insulation layers.
Standard adjustable dial thermostat ranges are upto 40 degrees C or upto 90 degrees C, with options upto 160 C and digital display of temperature.
Custom sizes can also be manufactured upon request.
Standard designs available for IBC's (Intermediate Bulk Containers) from most major manufacturers.
|
|
|
|
|
|
The THERMOSAFE Induction Drum Heater has been proven world wide over more than 20 years as the fastest, most reliable and safest method of melting solids from steel drums, and for the speedy heating of viscous liquids.
It is certified to the ATEX and IECEx standards for use in potentially explosive atmospheres, and is IP66 rated, so can be used in wet areas (even hosed down whilst operational!) and other harsh environments.
The external surfaces are high grade glass reinforced resins able to resist chemicals and acids, so the heater can withstand accidental splashes of hot liquids. There are no moving parts and it is completely maintenance free, so its lifetime operating costs are incredibly low.
No contact with the steel drum is required, as heat is generated by the drum wall itself, so it is exceptionally energy efficient, saving over 50% compared to conventional radiant heaters, and even more compared to steam ovens.
These units can be used individually, for example in research labs or small batch blending plants, or in groups at point of use, as highly cost effective replacements for large drum ovens.
|
|
DRUM HEATERS - for 200 litre barrels.
Drum Heaters facilitate the handling of solidified or viscous materials like adhesives, waxes, tar, chemicals, oils etc. They eliminate cumbersome methods and high investments, associated with steam and oil or fire wood heating.
Construction
Drum Heaters consist of a cylindrical metal cover carrying the flexible heating elements. A 2" thick thermal lagging of glass wool provides insulation and the metal casing makes for a rugged unit that can be wrapped snugly around the drum. The Drum Heater is hinged, and is mounted on castors for convenience. A base heater, also encapsulated in metal provides bottom heating. Control Panel incorporating thermostatic control is provided with the heaters.
|
|
|
The Hauck LHO Oil Line Heater is designed to supply the heat necessary to lower the viscosity of heavy fuel oils to that required at the burner for proper atomization. This typically requires lowering the pumping viscosity (nominal 2000 SSU maximum) to the atomizing viscosity (80 - 90 SSU). Auxiliary components can also be supplied to control fuel oil temperature and prevent overpressurization of the oil line heater. Hauck’s LHO’s are available in a wide range of sizes to meet specific application requirements.
|
|
| ... products without technical information |
| |
|
|
