|
|
MET MANN presents its new VIS MANN air curtains which provide an air barrier that prevents exterior air inflow.
Its main function is that one of keeping the premises internal temperature, preventing the heat loss inside of it.
We obtain a great energy saving thanks to this system, since the conditioning equipments work less.
The big range of air curtains allows they can be applied on doors of 3, 5 up to 5m high and from 1, 2 up to 2,5m wide. Due to its modularity, these curtains can be installed lined up, achieving so to cover any door width.
|
|
TMI, LLC (Trading & Manufacturing Industries) headquartered in Pittsburgh, Pennsylvania has air curtains for any need; temperature control, insect control, environmental controls. TMI has the right air curtain for the job.
Commercial door units are designed to be aesthetically pleasing, quiet, and efficient. Light Industrial units are best suited for applications inside a plant or warehouse. These popular units are ideal for controlling unwanted airborne contaminates, such as dust or fumes. Medium Industrial are the most widely used of all industrial air door units. These air door units have the same size cabinet as our light industrial units, but have more powerful motors and fans for increased performance. Medium industrial air doors are often used on loading dock doors to control heating and air conditioning loss. Heavy Duty and Extra Heavy Duty air curtains are for the larger industrial doors.
All Save-T Air Doors/Air Curtains are easy to install, quiet, and efficient. Most doors can be ordered with either electric or hot water/steam heaters. Heaters are mounted to the intake side of the air door unit and can raise the temperature of the exiting air stream by as much as 30°F. Indirect Gas fired heaters are recommended for larger industrial doors.
|
|
General purpose air curtain
Comfort air curtain, model SF, has been designed as an all round air curtain, suitable for 'normal conditons'. Like all other Biddle air curtains, model SF also comes with the patented rectifier technology. This ensures that the comfort is high (low air velocity) and that heated air stays in the building, resulting in maximum efficiency.
Ambient models are in some situations, very well suitable for climate separation in industrial environments like cold stores and chill rooms, where a low ventilation level exists.
By linking multiple air curtains next to each other, the air curtain can cover any width.
Specifications:
Capacities: Standard Performance (SP) and High Performance (HP)
Door heigths: 240 - 290 cm
Unit widths: 100-150-200 cm
Heating source: Water, electric or ambient
Models: Free-hanging and recessed
Standard colours: White or aluminium
|
|
All round air curtain for industrial buildings
The industrial air curtain, model InduForce (IF), has been designed as an all round "fit to all doors" air curtain for industrial doorways. Thanks to the Biddle rectifier a lower air velocity is needed to cover the entrance and less energy is lost to the exterior.
The IF keeps the warm air inside the building, so this air does not have to be continually heated up or cooled down, thus saving energy. The air curtain supplies part of the heat capacity that is needed for the room. This capacity can be deducted from the total climate control equipment required.
Model IF can be installed above or at the side of the door. For climate reasons, Biddle recommends a vertical air stream, which means that the units should best be installed above the door. If there are architectural limitations, it is possible to install the unit at one or both sides of the door.
Horizontal mounting:
The air outlet grille should not be higher than 5 meters above the floor. Any door width is possible when units are placed next to each other.
Vertical mounting:
If the air curtain is installed at one side of the door, the max. door width is 4 metres. With an air curtain on both sides, door widths up to 6 metres are attainable. Several units can be placed on top of each other to cover higher door heights.
Specifications:
Door heights: 400 - 500 cm
Unit widths: 110-165-220 cm
Heating source: Water or ambient
Models: Free-hanging
Colour scheme: Blue and metallic
Benefits:
Comfortable working environment
Energy savings
Free access
Combinable with overhead door
Easy to install
Simple industrial design
|
|
Perfect working conditions with IndAC industrial air curtain
The IndAC model makes entrances in industrial buildings accessible for transport and prevents draught problems in the building. To provide a complete screening of the huge doorways, the air curtain must discharge large air volumes. Therefore, the discharge pattern in the IndAC model has been optimised. Using the patented, combined rectifier, the air is blown out through the curved discharge grille with as little as possible resistance. The air stream reaches the floor in a straight, vertical line, so that a minimum of energy is consumed. The homogeneous discharge pattern provides for optimum heating of cold outdoor air, thus eliminating draught in the building.
Various mounting positions
The air curtain can be mounted in different ways, so that the curved discharge grille will always be as close as possible to the door, which screens off the doorway completely. The modular design makes that multiple air curtains can be easily linked next to or above one another, so they can cover each and every door height or width.
Specifications:
Capacities: S, M, L and XL
Door heigths: 300 - 800 cm
Unit widths: 150 - 225 cm
Heating source: Water or electric
Control unit: Basic, Plus or Automatic
Free-hanging in various (horizontal and vertical) mounting positions
Standard colours: Blue and metallic
Benefits:
Comfortable working conditions (no draughts)
Low energy consumption
Free access
Combinable with overhead door
Easy to operate and control
Flexible suspension system
Easy to maintain
|
|
| ... products without technical information |
| |
The MAT model is Biddle's state of the art air curtains since, from a technological point of view. This is the most advanced air curtain that has been developed so far.
Separating the climates between the coldstore and the ambient area, where temperature differences of 40°C may occur, without blocking the passage. The MAT Air Curtain:
- saves energy (up to 80%)
- improves temperature maintenance in cold stores
- provides free access and fast logistics
- prevents misting and icing in cold stores
The MAT air curtain produces 3 air streams of different temperature and humidity parallel to each other. This makes that the door can be left open and that the temperature in both the cold store and the ambient area remains constant. As no moisture is exchanged any longer, there will be no more ice depositing on walls, floors, ceilings and cooling systems either, which reduces the risk of slipping. In addition, fork lift truck drivers have an unobstructed view. As the door stays open, transport can take place faster. And, as a result of the reduced icing, the cooling system requires much less maintenance. All this put together leads to increased efficiencies and cost savings.
Benefits:
- No misting
- No icing up
- Open door: Faster transport
- Energy savings
- Increased safety
|
|
Daikin wall mounted units have a space-saving,
modern profile and have been designed to be
mounted high up on walls. This makes for optimum air
distribution throughout the room and whisper-quiet
operation. The FTXG/CTXG design wall mounted unit
is sleek, compact (only 15 cm deep) and very stylish in
material, shape and colour. The front panel is made
of transparent synthetic material with a matt crystal
white or matt crystal silver surface. It is no accident
that the FTXG/CTXG was awarded the ‘Good Design
Award 2004’, a prestigious distinction in Japan in the
industrial design field.
For more information or other types of air conditioning for your home, please go to the link and you will be connected to the official Daikin site.
|
|
The thermal management program is a computer-aided calculation system for switch cabinet air-conditioning.
It takes care of all the worries associated with production standstill caused by overheated switchgear systems.
The program contains databases of the Eldon enclosures, their dimensions, the conditioning devices (filter/fans, cooling units, heat-exchangers) and a selection of the most used electrical components with their heat dissipation. Additional databases can be created within the program.
After having chosen the enclosure type and size, given all the environment conditions (enclosure situation, required equipment temperature, ambient temperature and heat dissipation), the program will propose the most appropriate conditioning solution. A calculation report can then be printed.
To allow the installation study of the cooling devices on the enclosures in the early stage of a project, dimensional drawings of all the devices will be provided in CAD system DXF and AutoCAD file formats soon. You can find the different dimensions in our datasheets.
Download our easy to use Calculation Model in www.eldon.com
|
|
SLIM-IN Line
Door/Wall mounting System description
Specifically developed for door or wall mounting, the air conditioners of the series SLIM-IN cover a cooling capacity range from 850W to 2500W.
They are available in 230V (and some items in 400V).
Common to most of the SLIM-IN models is the Maintenance Free concept.
All models are equipped with an electronic board (not for EVE08).
::Reciprocating hermetic compressor with thermal amperometric protection ::Ecological R134a refrigerant, CFC free ::Condensing and evaporating heat exchange coils in copper pipe with aluminium fins ::Internal and external fans on ball bearings with internal thermal protection ::Electronic board EBB (For EVE08 Internal mechanical thermostat set at 35°C, dead band 4°C) ::Power supply wire 3m long ::Steel sheet front cover powder painted RAL 7032 orange peel ::Zync plated frame
Optionals
::Stainless steel frame and front cover ::Not standard colour (RAL) ::Electronic board EBB (not available for EVE03)
|
|
All APEX air-conditioning units are HOMOLOGOUS for the motor industry and are recognised as being among the best performing, above all in harsh environment, such as workshops, factories, forges, foundries, blacksmith's and paint shops.
APEX condensers are specially designed and installed to operate WITHOUT FILTERING ambiant air. Their surfaces and installation are one of the key points in the overall performance of the entire APEX range.
We have developed a specific range of air-conditioning units for outdoor and marine applications. They are portable and/or suitable for operating in all weathers.
|
|
Air condensation can operate at temperatures up to 71 °C.
Air condensation technology can be used to air condition a cabinet when there is no industrial water supply.
Apex Technologies is the first to market a range of very high temperature air condensation air conditioners, specifically suited to extremely difficult industrial environments (foundries, forges, iron and stell market, thermal treatement, ovens, cranes...)
This technology is fully compatible with the features of other vertical air condensation air conditioners in our range: cutout, wiring, components, operation without air filters thanks to very wide blades, separation of air flow...
|
|
Range DTS 7000
Enclosure cooling units for side- or door-mounting
- sealed with protective edging; no extensive work on the installation cutout necessary!
- DTS 7141, 7241, 7341, 7201, 7301: temperature regulated by integrated thermostat
- new standard electronics for DTS 7541 / 7441
- DTS 7541 / 7441 are available as standard with special voltage 380 V / 400 V / 440 V / 460 V / 480 V
|
|
+ filterless maintenance-free
+ cooling performances 600...2000 W (L35/L35)
+ space-saving ex./internal mounting
+ flat design-sheet steel housings
+ customer specific painting
+ stainless steel models
+ Microprocessor controls
+ R134a refrigerant
|
|
Mini size Maxi cooling for small enclosures
+ filterless maintenance-free
+ cooling performance 200...500 W (L35/L35)
+ for external, internal & top mounting
+ flat design sheet steel housings
+ customer specific powder coat painting
+ stainless steel models
+ Micro-processor controls
+ R134a refrigerant
|
|
|
This unit's lambada-shaped heat exchanger has a wide suction area which increases the air intake enabling the unit to adjust to the room temperature quickly. The output is a powerful sweeping airflow eliminates that dead zones and improves the cooling and heating effect while the trapezoidal blades cut the air diagonally to minimise air resistance, which reduces noise and improves efficiency. For easy maintenance the unit has a washable carbon and anti-bacteria air purifying filter.
|
|
• Pitot tubes Type L : pitot tube with ellipsoidal head. An intake for total pressure and 6 holes for static pressure. Body made of stainless steel.
• Pitot tubes Type L with TCK : pitot tube with ellipsoidal head. An intake for total pressure and 6 holes for static pressure. Sheated thermocouple K probe integrated, with connection cable length 1,5 m. Body made of stainless steel.
• Pitot tubes type S with TCK : pitot tubes with TIG welding and protective tube made of stainless steel. Sheated thermocouple K probe integrated, with connection cable length 1,5 m. Body made of stainless steel.
• Air Flow Measuring blades DEBIMO : simple and cost effective method of providing permanent air flow measurement in rectangular or circular ducts. When used with a KIMO differential pressure device (pressure, transmitter, electronic micromanometer, liquid column manometer, differential pressure switch, ...).
DEBIMO air flow measuring blades ensure accurate indication, control or recording of air flow velocity and volume. Permit velocity measurements from 3 to 100 m/s (9 Pa to 10000 Pa).
|
|
|
|