|
|
Farming hot air generator completely autonomous with heating gas oil, natural gas or liquefied petroleum gases (butane gas, propane gas) operation.
These equipments function is that one of heating the environmental air by means of the thermal energy produced by the equipment.
The produced heat is driven to the premises that must be conditioned by means of a centrifugal fan.
The combustion products are extracted through a chimney in order to ensure that the driven hot air is exempt of smokes and bad smells.
The main features are the following ones:
-Heating gas oil, natural gas or liquefied petroleum gases operation.
-Closet made with galvanised sheet.
-Heat exchanger dimensioned in order to obtain performances superior to 90%, made with AISI-430 stainless steel.
-Combustion chamber made with AISI-304 stainless steel.
-Control panel made in a watertight box for avoiding the high humidity degree in greenhouses.
-Reinforced environmental thermostat with 5m hose and fast connector included in the equipment.
-Base equipment prepared with air impulsion grid of simple deflection.
-It can have circular hoppers or any other kind of impulsion pipes coupled on it.
|
|
DESCRIPTION:
Gas domestic hot air generator with leakproof operation and smoke outlet through an extractor.
Its operation is completely autonomous and its function is that one of heating the environment air of the premises that must be conditioned.
The basic equipment has the following elements:
- Leakproof combustion with forced draft.
- Combustion oven designed for obtaining a performance of about 90%.
- Three-speed fan (except for the GAS-40 model, which is one-speed).
- Air admission filters.
- Environment thermostat.
- Air impulsion grid on the upper part (GAS-08-12-15).
FUEL:
Natural gas / LPG
APPLICATIONS:
Any kind of premises with a volume between 190 m3 and 980 m3.
|
|
SYSTEMA introduces the new series of EOLO, suspended warm air heaters able to solve all heating problems, both for total and modular space heating. Compared with traditional heating systems needing a separate cabinet, the new EOLO heaters offer an innovative solution for heating while keeping running costs at a minimum.
This is possible thanks to the fact that EOLOs are completely self-sufficient working units, and that you don?t need to heat up a heat transferring fluid such as water for heating the space. In this way you don't have any needless heat losses.
|
|
Full range of heating cabinets gas or oil fired.
Available in vertical or horizontal versions, inside or outside and able of ducted appications.
Air flow from 6000 to 60000 m3/h and power from 70 to 1120 KW.
High temperature resistant steel exchanger or stainless steel.
For various cases, the body can be double skin.
Filtration optional.
Applications : Industrial buildings heating and/or ventilation with sveral kind of applications for high level confort for users.
This equipment is in accordance with European directive related to gas fired equipment 90/396/CEE under n° 49AQ1369 and 1370 and electro-magnetic compatibility CEM 89/336/CEE and low voltage 73/23/CEE.
|
|
Craftsmen and construction workers value the many advantages of the practical heaters of the DZH series. Handy and problem-free to use, they are preferably suited for the de-icing or heating of construction materials, vehicles, equipment, water pipes, supply lines, and so on. These devices also provide for effective, immediate heat in closed, well-ventilated rooms
- Installed oil burner in a high-pressure system for EL heating oil or diesel
- Stainless steel combustion chamber
- Direct heater with 100% efficiency
- Integrated tank or Oil-reservoir fitting
- Easy to transport
- Fully automatic controls
|
|
Hot gas generators fabricated by Unitherm Cemcon are designed for direct air heating performed by a firing system. Air to be heated is either supplied by a dilution air fan or is delivered from process with high or low temperatures or combinations of both.
Unitherm Cemcon provides:
* Hot gas generator engineering for supply or local manufacturing
* brick lining material
* Burner (mono block or special designs) incl. operation valve train and fuel supply system
* Diluton air fan
* HGG field instruments for performance and safety control
* HGG control cubicle
|
|
|
The heaters are used successfully by farmers and gardeners. Whether in well-ventilated stalls, equipment sheds, or greenhouses, their mobility makes them practical and universal. The heaters are delivered ready for plug assembly. They are ready for operation after connection to the 230-volt a.c. mains and to propane gas cylinder(s). For energy savings, the devices can be delivered in automatic design (PGT) with a room thermostat that is ready for plug assembly.
|
|
| ... products without technical information |
| |
For fuel cell applications, pure hydrogen generators are not a very good solution as they are bulky, heavy and expensive. Fortunately a fuel cell can run very good on a hydrogen rich stream rather then pure hydrogen. Therefore a fuel processor consisting of a reforming reactor in combination with a shift and prox are a more favorable solution. Also the low storage density of hydrogen or the lack of sufficient hydrogen infrastructure can be a driving force to choose for a more compact on-board fuel processor. Moreover on-board reforming gives a choice to use several (green) fuels, such as methanol, ethanol, biodiesel and DME. In certain stationary fuel cell applications similar needs for on-board reforming exist.
OEM's who need to adapt their products to the new technology of fuel cells are often not well experienced in fuel cell and reforming technologies. HyGear with its extensive experience in reforming technologies and fuel cell system integration can be a partner in developing the required solutions.
|
|
In the last years COELMO® started the developing of new generating sets using Proton Exchange Membrane (PEM) fuel cells fed by hydrogen. COELMO®’s hydrogen-fueled products create high quality, reliable power and offer the security of standby, emergency or uninterruptible power where it is needed most.
COELMO® has developed a backup power generator fed by pure hydrogen for indoor operation. H2POWER – BPG120 is a fuel cell generator powered by Ballard's fuel cell technology.
COELMO® is now developing a natural gas-fueled 2kW combined heat and power generator for the residential market H2POWER – CHP200.
|
|
| ... products without technical information |
| |
... see all the products in the category
Fuel cells
|
The standard production of Induction systems has been therefore enriched with the construction of prototype systems that express our growth in the direction of applied research, and that allow to develop innovative solutions in the induction heating sector.
Induction’s main objective is the application and development of innovative solutions in medium and high frequency induction heating, allowing maximum system reliability together with high technological content.
The personalization of Induction systems, together with Customer interaction, assures an enduring relationship over time, and professional service during the product’s entire lifecycle.
The Induction production line-up is able to satisfy all standard and special requirements of industrial induction heating, by means of an innovative technology that allows to obtain an electrical efficiency close to the theoretic limits.
Induction converters are medium frequency static generators, applied to series or parallel resonant circuits, whose use allows heating though magnetic coupling.
In spite of different circuit solutions, Induction converter performance is assured by continuously updating projects for the tuning of new constructive solutions. Furthermore, the development of control and adjustment power components is in continuous evolution, while all applications are compliant with the norms in force in the area of machine directives.
|
|
| ... products without technical information |
| |
The FX/MX102 is a single-chip device to extract single periodic signals from very high random-noise environments.
Using patented autocorrelation techniques the MX102 will enhance the input signals signal-to-noise ratio by as much as 8.5dB and provide a digital output signal centered at four times (x4) the input frequency.
The amplitude of non-periodic components of the signal is substantially reduced. The patented autocorrelator compares the incoming signal to itself; the more elements of the waveform that are seen as periodic, the higher the energy at the microcircuit output.
The FX/MX102 cascades two autocorrelators, each one improving the signal-to-noise ratio.
|
|
| ... products without technical information |
| |
Electron and Ion Beam
Power Supplies
KSI offers rugged designs intended for difficult applications with frequent arc-over events, providing high performance and high reliability:
- Application specific designs up to 200 kV and 20 kW
- Soft switching resonant topologies for high efficiency, compact size, fast dynamic response, and low stored energy
- Analog, RS-232, or custom I/O interface
- Closed-loop emission current control
- Single or dual filament; fine and/or coarse control
- Low ripple, tight output regulation, and highly accurate repeatability
- Protected against open and short circuits, arc's, overtemperature, overvoltage, and other fault conditions
- Universal input and PFC available
- UL, TUV, CSA agency approval available; CE mark and/or RoHS compliance available
|
|
The LASERGAS nitrogen generator is a truly high range generator thanks to sophisticated technology and exceptional performance.
This unique gas generator is capable of producing nitrogen at very high pressure. It is available in various versions with different outputs, purity and pressure ratings.
The LASERGAS nitrogen generator can be used in any area of industry requiring a medium or high pressure nitrogen supply, or whenever intermittent demand requires large reserves of nitrogen to be kept ready for rapid consumption.
|
|
|
|
see the results for the following category
