|
|
|
WATERSTRIPs (radiant thermal strips) are suitable for heating large industrial and civil buildings by radiation. They are the best solution where low-noise operation, no air flow, and no dust circulation is required. WATERSTRIPs are suitable to heat rooms housing inflammable mixtures without any problem. No air flow and low stratification ensure low running costs.
|
|
The company Systema SpA proposes an innovative technology for the heating system with a NEW product: THE WATER STRIPS "TS". They are used particularly to environments with fire risk' activity, for example textile industries, body shop, plaining mills, environments of public show and local with a lot of of people presence, warehouses with shelvings, environments dedicated to sporting activity and downtown.
The water strips "TS" are units that heat the space by radiantion, allowing an energetic saving, in fact the heat is directly to the people without loss of heat in the air. Please ckick here if you want to dowload the cathalogue.
|
|
The VAPORAD steam radiant panels are used to heat industrial or civil buildings that are particularly concerned with fire prevention.
This system is able to completely fulfil the requirements of a system that must run silently and not cause air movement, heating both large and small spaces.
The lack of air movement and the reduced heat stratification keeps operating costs particularly reasonable.
The steam panels create a greater heat output compared to panels heated with hot water and guarantee a larger amount of diffused heat per radiant surface
|
|
With Watlow's diverse RAYMAX® radiant heater line, we have a solution for almost any application requiring radiant heat. Our capabilities cover a wide range of needs, from contamination-resistant panel heaters to fast-responding quartz tubes to rugged tubular elements and high temperature ceramic panels.
Applying radiant heaters can be complicated. Watlow's engineering staff has the level of training required to help you meet your application requirements, providing a high degree of technical support such as conducting testing for your application at our facility, calculating your watt density and temperature requirements, and recommending system components such as sensors and controllers. With our experience in a wide range of industries, chances are Watlow has already helped someone handle a radiant heating application like yours.
Applications
Thermoforming
Food warming
Paint and epoxy curing
Heat treating
High temperature furnaces
Tempering and annealing processes
|
|
A RANGE OF CERAMIC GAS HEATERS ADAPTED TO ALL HEATING NEEDS IN INDUSTRIAL BUILDINGS (height of 4 meters and more).
Use: Industrial buildings, Churches, Sports halls, Car service, Terraces, ...
- a large range of heaters from 2,5 to 27 kW and more.
- a choice of 10 powers for a comfort in all type of buildings whatever the
hanging height of the heaters
- a double-speed option for a better comfort, particularly in well insulated
buildings
|
|
A RANGE OF CERAMIC GAS HEATERS ADAPTED TO ALL HEATING NEEDS IN INDUSTRIAL BUILDINGS (height of 4 meters and more).
Use: Industrial buildings, Churches, Sports halls, Car service, Terraces, ...
- a large range of heaters from 2,5 to 27 kW and more.
- a choice of 10 powers for a comfort in all type of buildings whatever the
hanging height of the heaters
- a double-speed option for a better comfort, particularly in well insulated
buildings
|
|
|
Wide area radiant heaters can be mounted to radiate in any direction and can reliably operate, with no reduction in radiant output over the life of the heater. The lightweight building block approach allows for a modular installation which is easily expandable. One-piece bonded construction resists damage from vibration and shock. These heaters also have a lower operating cost with up to 80% of the input energy transmitted to and absorbed by the work material.
|
|
Evolix EC. - Radiant panels warm water
Composed of 5 models available in 2 lengths: 3000 or 6000 Mr.
Power: from 100 to 150 W/m ² (water 90/70 °C)
Space heating of large volumen (installation starting from 3 m up to 12 m).
Industry, versatile rooms, colleges, colleges...
|
|
Infrared SUNRAD Emitters is suitable for great radiant efficiency, thanks to the very high temperature of its emitting surface (900°C) and to its small dimensions.
SUNRAD emitters can be installed at considerable height (up to 30 m) considering they are provided with a reflector concentrating the radiation power.
Sempre più diffuso per il riscaldamento dei luoghi di culto
|
|
A RANGE OF CERAMIC GAS HEATERS ADAPTED TO ALL HEATING NEEDS IN INDUSTRIAL BUILDINGS (height of 4 meters and more).
Use: Industrial buildings, Churches, Sports halls, Car service, Terraces, ...
- a large range of heaters from 2,5 to 27 kW and more.
- a choice of 10 powers for a comfort in all type of buildings whatever the
hanging height of the heaters
- a double-speed option for a better comfort, particularly in well insulated
buildings
|
|
| ... products without technical information |
| |
Please select one table row below:
Format of the mould
156x156
156x196
156x246
156x296
196x196
190x246
196x296
196x346
196x396
218x246
218x296
|
|
The K-program contains bored plates, those worked on and dimension is all-round with P-Normalien. They are combinable after the building block principle. Their area of application is in spraying pouring, pressing and printing casting tools.
Sub-groups of the K-program are the employment building block principle KR, the cheek tools K 2500 and K 2501 and the HASCO Wechselwerkzeug system K 3500.
|
|
A very large number of materials:
STEEL
GALVANISED
STAINLESS STEEL
ALUMINIUM
ALLOYS
OTHERS
PVC …
In an extended range of thickness:
From 0.3mm to 30mm
With varied shapes of holes:
ROUND
SQUARE
LONG WITH ROUNDED ENDS
LONG WITH SQUARE ENDS
HEXAGONS…
In sheets or in reels, from single part to large series, flat or shaped, you can find a solution for all your needs from GANTOIS.
|
|
We have available in stock consistent quantities of sheets in standard commercial size 1000 x2000 mm, thicknesses from 0,3 mm up to 10 mm and perforation from 0,3 mm up to 100 mm. Perforation range: round,square and rectangular holes.
Usually holes diameter can not be lower than thickness.
Usually the round holes layout is at 60°. Squared and rectangular holes, instead, are aligned.
Calculation of 1 Sq.M. weight:
ps = absolute (specific) weight (Kg)
v/p = open area (%)
s = thickness mm
kg = [s*ps*(100-v/p)]/100
Open area calculation when holes 60° staggered:
V/p = open area (%)
D = holes diameter (mm)
P = holes pitch (mm)
v/p = (D2*90,7)/p2
|
|
|
BÖHLER BLECHE, a pioneer in the production of cross-rolled sheets and plates. Offering our clients supreme uniformity in terms of mechanical and physical properties ,as a result, our tool steels, high speed steels, specialities and press plates meet the most stringent demands. Just these more we also have a powder metallurgy facility at our disposal for the production of high performance grades with outstanding properties.
|
|
Sheets
Sheets made of high performance materials.
PLANSEE offers a wide range of cold-rolled sheets made of refractory metals and their alloys. Most of them are available directly from stock thanks to PLANSEE EXPRESS.
Sheets available in the following materials:
* Mo*
* MLR*
* TZM*
* W*
* MLS*
* Ta*
* Cr
* Nb
* standard dimensions via PLANSEE EXPRESS
Furthermore PLANSEE also manufactures sheets made of various high performance materials (e.g. Titanium alloys, WRe, MoRe, etc.). For detailed information please contact your PLANSEE partner.
|
|
Flat sheet friction material in moulded organic & woven form.
Thickness ranges from 3mm to 65mm
Available in metallic & non metallic. Sheet sizes 500mm x 500mm
Friction coefficients from 0.12-0.65 available from stock.
|
|
The P-program consists of ungebohrten plates, which are generally worked on and are predominantly used for forms, tools and devices. P-Normalien are suitable ideally for the production of form plates with extensive machine cuttings as well as for employments, slidegate valves, cutting and tool construction elements.
Sub-groups of the P-program are the precision employments PR, the special plates P1100 with larger working on air passage and the precision flat steel bar P 5000.
|
|
| ... products without technical information |
| |
|
|