|
|
At Space-Ray, industrial comfort is a challenge we take seriously.
We have been manufacturing gas-fired infrared heating systems since 1958. The quality and performance of our heaters are based on over 45 years of field experience and exposure to industrial/commercial heating problems.
Our reputation is built upon a solid track record for providing highly radiant efficient, easy to install and high quality infrared heating equipment.
With Space-Ray's energy efficient gas infrared heaters, you can put the warmth of the sun anywhere the job calls for it.
These rugged industrial workhorses have many years of proven experience. And, there's no need for fans, ducts or electricity, and no moving parts. Just run a gas line to them and they are ready to go.
|
|
Our cabling systems may be divided into two groups according to their field of application:
Systems for building installation:
ecobus power 5x10 mm²
The system for building automation. Both power current lines 5x2,5 mm² and bus lines 2x1,5 mm² with twin shielding are combined in one sheath. This means that the bus lines must not be interrupted any more for connecting devices - a principle, that was only used for power current lines until now. Thanks to ecobus combi, the bus installation requires a minimum of wiring works. Due to the decentralized repartition of the bus devices, the structure of the installation suits perfectly every type of requirements.
ecobus combi 5x2,5 mm² 2x1,5 mm²
ecobus power 5x2,5 mm²
ecobus data 2x1.5 mm²
multibus 4x1,5 mm²
ecoline-p3 3x2,5 mm²
Systems for industrial application:
ecofil i 5x16 mm²
ecofil i 7x2,5 mm²
Industrial appliances nowadays reach a high flexibility thanks to bus systems and control devices. To allow easy implementation and maintenance works, the applicances often have a modular structure which has already been determined during planning. The ecofil i 7x2.5 system perfectly suits appliances which have to be easy to modify and where power current and weak current have to be supplied in an easy and secure way. Thanks to this system, the T-pieces which are commonly liable to breakdowns and which are usually necessary for the branching of round cables can be avoided.
|
|
Whatever the application, we will match it with a customised solution. The M5 standard features can be enhanced with an impressive range of optional extras.
Different tyre options
Choice of forks
Choice of lift heights
Range of attachments
Our extensive service network, in more than 40 countries, offers you high levels of expertise, obtained through its long term link with Moffett and parent company Hiab. Our highly skilled service network team is used to solving just about any challenge and is always nearby.
|
|
|
Standard Duty Metallic Mine/Construction Pumps are ideally suited for on-demand, portable, moderately abrasive fluids, and suspended solids. Standard duty metallic pumps, ideal for mine duty applications, are constructed in Aluminum, Cast Iron, Stainless Steel and Alloy C with elastomer TPE (thermal plastic elastomers) and PTFE options in diaphragms and check valves. Standard Duty Non-Metallic Pumps are ideally suited for highly corrosive fluids, portable, low abrasive fluids, and suspended solids. Standard Duty Non-Metallic Pumps are constructed in Polypropylene, and PVDF with TPE (thermal plastic elastomers) and PTFE options in diaphragms and check valves. Because of the non-metallic materials, these pumps can de water high or low PH levels underground.
|
|
Ausco is the leader in brakes for construction equipment.
Ausco designed a brake that acts as both the parking brake and the mid-mount bearing. The result was a high-value product that eliminated Deere's reliability concerns with caliper brakes and reduced overall cost.
Ausco also leads the market with innovative products on dozers, mini-dumpers, backhoe loaders, telehandlers, trenchers, pavers, graders, etc. In fact, it is hard to drive by a construction site without spotting at least one piece of equipment that features Ausco brakes.
|
|
... see all the products in the category
Brakes
|
Pressure range up to 5700 bar / 80,000 psi
Flow up to 50 L/min per pump
Provided with one or more Resato air driven pump(s) or booster(s)
Direct water feed or with built-in reservoir
Manually operated or computer controlled
Ergonomic, safe and user-friendly design
Low noise level
Suitable for various test mediums such as tap water, oil, an emulsion of both and many other liquids and gases
Modular and flexible design makes it possible to build a unit to your specific requirements
WE ARE LOOKING FOR A DISTRIBUTOR IN ITALY. Please contact us if you are interested!
|
|
Honeywell electromechanical shifters are designed for off-highway applications requiring direction and speed control. They are completely sealed and are built to withstand the harsh environments of the off-highway industry. Mounting clamps for shifters and turn signals are available to order separately, with or without locating pin, for column sizes shows in order guides.
|
|
We offer an extensive list of subcomponents for building high-quality Fiber Lasers. We design and manufacture Yb and Er/Yb cladding pumped fibers, power combiners in 7:1 and 19:1 configurations, multimode launch fibers to match input fibes, metalization and ferrules for diode subassemblies. Other building blocks and capabilities include: large mode area fibers, end preparations, fiber Bragg gratings, and connectorization.
Cladding Pumped Fiber Lasers (CPFLs), Cladding Pumped Fiber Amplifiers (CPFAs), and Gain Modules are designed and produced in-house to meet your specifications.
|
|
|
This machine adopts loading hydraulically with accurate and reliable test data. In order to guarantee the accuracy of test load readout, it adopts oil pressure transducer to measure the load, after amplifying, the test load, peak value and loading speed can be displayed digitally. The oil source is installed at the bottom of control cabinet in which there is a double-flow high-pressure piston pump driven by the motor. The hydraulic system is controlled manually with the functions of easy operation, safety and reliability.
|
|
Dalmec has produced many Industrial Manipulators used in the building sector for the handling of paving tiles - sanitaries - cement products - isolating materials etc.
The photo illustrates a Manipulator Partner type, column munted version, with a base-plate for forklift truck.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category
