|
|
Ceramic cartridge heater:
- Suitable for air temperatures up to approx. 600° C
- With motor tap
- Heat resistant connecting leads
- 220-240 volts up to approx. 2000 watts possible
- With integrated shunt for electronic type
- For temperatures 100-600° C
|
|
PTC-Heating Technology
PTC heating elements can be advantageously used for many types of heating due to their special resistance temperature characteristics. The equipment which is normally necessary for the regulation of temperature and the securing from overheating can be done without.
The used capacity PTC have an extremely positive run of the electrical resistance depending on the temperature. Therefore also the name PTC (Positive Temperature Coefficient).
|
|
|
Silicone heaters consist of two layers of silicone with an integrated fibreglass-mesh and heating wires laid out between the two layers. They are thermally and mechanically designed to withstand temperatures up to 200°C, without losing their shape. The silicone heater is vulcanized into a homogenous unit, ensuring the flexibility necessary to adapt to the mounting surface.
|
|
|
Tube heating elements meat nearly all heating requirements, as well immersed in fluid as in moving air or moulded resp. pressed in solids. The output rating is function of the surface loading and measured in W/cm2 heating surface.
|
|
The Revolutionary Watt-Flex®
Split-Sheath Cartridge Heater
* Maximizes Heat Transfer
* Reduces Maintenance Costs
* Reduces the Cost of Process Heating
Watt-Flex Cartridge Heaters run more efficiently, use less power and last up to 5 times longer than conventional cartridge heaters.
|
|
|
|
|
|
Higher Watt Density and Temperatures
Watt Flex heaters produce up to 50% higher warrantable watt-densities than conventional heaters and can operate at much higher temperatures - up to
1900 degF (1030 degC).
The Watt-Flex Cartridge Heater is a high-quality tubular heating element bent back on itself and swaged into a cylindrical format. Dalton manufactures heaters using only high-purity magnesium oxide, nickel chromium resistance wire and stainless steel terminals.
Special filling methods and equipment compact the magnesium oxide inside and around the resistor coil to extreme density. Swaging further compacts the magnesium oxide to virtually maximum density, which yields high dielectric strength and efficient internal heat conduction. Unlike conventional heaters, Watt-Flex cartridge heaters have no ceramic core that can crack during swaging.
The continuous coil and tightly compacted MgO assure highest watt-density and higher operating temperatures.
Watt-Flex Cartridge Heaters run more efficiently, use less power, last longer and are much simpler and faster to replace than conventional cartridge heaters.
|
|
Watt-Flex Replaceable Immersion Heaters
Heating an acidic or caustic solution in an immersion application can be a difficult and often dangerous procedure. Dalton’s Watt-Flex replaceable immersion system eliminates the complication of changing the heater and draining the tank.
Dalton Electric’s Watt-Flex cartridge heater and immersion well system use a sheath with a welded endcap and NPT fitting that screw into the side of the tank. The sheath becomes a permanent part of the equipment. The cartridge heater is then inserted into this well and held in place with a flange. It can be removed and replaced with ease.
|
|
|
Diff-Therm Platen Heaters are high-quality tubular heating elements swaged under 50 tons of pressure into grey iron castings. For 25 years, Diff-Therm heaters have set the standard for long-life, evenly distributed process heating and efficient power generation.
|
|
Feature/Advantage
-Stable & Sturdy-
* Panel Size: 15"-22"
* Multi-Language OSD Control Menu
* Touch Technology: R5W, SAW or CAP
* Touch Interface: USB or RS-232
* Video Interface: D-SUB (VGA)
* Built-in Multimedia Speaker
* VESA Wall Mounting
* Hardware customization available
* Different stand or wall mount rack options
* Beautiful and superthin design
* Environmental protection and space saving
Application:
*Point-of-sale terminals
*Information Kiosks;
*Food Service and Preparation;
*Medical Instrumentation;
*Process Control Systems and Transportation Tracking;
*Vending and ticket sales;
*Electronic catalogs;
*Gaming; Lottery, and amusement;
*Public pay phones;
*Multimedia marketing;
*Banking/financial transactions;
*Industrial control rooms;
*Computer-based training.
|
|
* Panel size: 10.4"-19"
* Multi-language OSD Control Menu
* Touch technology: R5W, SAW or CAP
* Touch interface: USB or RS-232
* Video interface: D-SUB (VGA)
* Optional built-in multimedia speaker
* VESA wall mounting
* Hardware customization available
* Different stands or wall mounts rack options
* Super-thin design
* Stable & sturdy
* Environmental protection and space saving
Application:
* Point-of-sale terminals
* Information kiosks;
* Food service and preparation;
* Medical Instrumentation;
* Process control systems and transportation tracking;
* Vending and ticket sales;
* Electronic catalogs;
* Gaming; lottery, and amusement;
* Public pay phones;
* Multimedia marketing;
* Banking/financial transactions;
* Industrial control rooms;
* Computer-based training.
|
|
* Panel size: 12"-19"
* Multi-language OSD Control Menu
* Touch technology: R5W, SAW or CAP
* Touch interface: USB or RS-232
* Video interface: D-SUB (VGA)
* Optional built-in multimedia speaker
* VESA wall mounting
* Hardware customization available
* Different stands or wall mounts rack options
* Super-thin design
* Stable & sturdy
* Environmental protection and space saving
Application:
* Point-of-sale terminals
* Information kiosks;
* Food service and preparation;
* Medical Instrumentation;
* Process control systems and transportation tracking;
* Vending and ticket sales;
* Electronic catalogs;
* Gaming; lottery, and amusement;
* Public pay phones;
* Multimedia marketing;
* Banking/financial transactions;
* Industrial control rooms;
* Computer-based training.
|
|
* Panel size: 10.4"-19"
* Multi-language OSD Control Menu
* Touch technology: R5W, SAW or CAP
* Touch interface: USB or RS-232
* Video interface: D-SUB (VGA)
* Optional built-in multimedia speaker
* VESA wall mounting
* Hardware customization available
* Different stands or wall mounts rack options
* Super-thin design
* Stable & sturdy
* Environmental protection and space saving
Application:
* Point-of-sale terminals
* Information kiosks;
* Food service and preparation;
* Medical Instrumentation;
* Process control systems and transportation tracking;
* Vending and ticket sales;
* Electronic catalogs;
* Gaming; lottery, and amusement;
* Public pay phones;
* Multimedia marketing;
* Banking/financial transactions;
* Industrial control rooms;
* Computer-based training.
|
|
RKVM-1708
17" TFT LCD 1U Rackmount KVM Switch 8 Ports
Features:
17" TFT LCD 1280 x 1024
Built-in A/D Board
Support 8 Ports KVM Switch
Membrane keyboard in 104 keys, with touch pad
Auto scan mode for monitoring PCs
Built-in rail self-locking device
RoHS ComplianceR=
|
|
Feature :
- 17” TFT LCD 1280 x 1024
- Built-in A/D Board
- Built-in OSD Button
- Support D-SUB and DVI-I Input
- The depth of chassis would be 515mm
- RoHS ComplianceT
|
|
| ... products without technical information |
| |
MODEL SERIES - DC30
PMDC GEARED MOTOR
Design - Motor DC30 is a carbon brush DC motor which is used in combination with many MechTex gearheads. The standard gearheads used in conjunction with this motor are GB2,GB5P, GB5H, GB38OCP, GB3, GB4, GB7,GB8 & GBW. Depending on the application, output speed, load applied, etc. the type of gearhead can be selected. Various types of gears i.e. poly acetal, sintered iron, brass or
steel gears can be used based on the requirement. Poly acetal or sintered gears damp the noise. Case hardened steel gears are always on the output for load considerations. Complete poly acetal gears are used when the output torque
required is low. Linear drive is possible with gearhead GB4, GB7, GBW with M6 x 1 mm pitch screw. The linear guide & screw arrangement can be done only on special request.
|
|
MODEL SERIES - DC33
PMDC GEARED MOTOR
Design - Motor DC33 is a carbon brush DC motor which is used in combination
with many Mech Tex gearheads. The standard gearheads used in conjunction with this motor are GB2, GB5P, GB5H, GB38OCP, GB3, GB4, GB7, GB8 & GBW. Depending on the application, output speed, load applied, etc. the type of gearhead can
be selected. Various types of gears i.e. poly acetal, sintered iron, brass or steel gears can be used based on the requirement. Poly acetal or sintered
gears damp the noise. Case hardened steel gears are always on the output
for load considerations. Complete poly acetal gears are used when the output
torque required is low. Linear drive is possible with gearhead GB4,GB7,GBW
with M6 x 1 mm pitch screw. The linear guide & screw arrangement can be
done only on special request.
|
|
MODEL SERIES - DC28
PMDC GEARED MOTOR
Design - Motor DC28 is a carbon brush DC motor which is used in combination with many Mech Tex gearheads. The standard gearheads used in combination with this motor are GB2, GB5P, GB5H, GB38OCP, GB3, GB4, GB7, GB8 & GBW. Depending on the application, output speed, load applied, etc. the type of gearhead
can be selected. Various types of gears i.e. poly acetal, sintered iron, brass or steel gears can be used based on the requirement. Poly acetal or sintered gears damp the noise. Case hardened steel gears are always on the output for load considerations. Complete poly acetal gears are used when the output
torque required is low in an economical model (GB7P). Linear drive is possible with gearhead GB4, GB7, GBW with M6 x 1 mm pitch screw. The linear guide & screw arrangement can be done on special request.
|
|
MODEL SERIES - DC32
PMDC GEARED MOTOR
Design - Motor DC32 is a carbon brush DC motor which is used in combination with many Mech Tex gearheads. The standard gearheads used in conjunction with this motor are GB2, GB5P, GB5H, GB38OCP, GB3, GB4, GB7,GB8 & GBW. Depending on the application, output speed, load applied, etc. the type of gearhead can be selected. Various types of gears i.e. poly acetal, sintered iron, brass or
steel gears can be used based on the requirement. Poly acetal or sintered gears damp the noise. Case hardened steel gears are always on the output for load considerations. Complete poly acetal gears are used when the output torque
required is low. Linear drive is possible with gearhead GB4,GB7,GBW with M6 x 1
mm pitch screw. The linear guide & screw arrangement can be done only on special request.
|
|
MODEL SERIES - DC25
PMDC GEARED MOTOR
Design - Motor DC25 is a precious metal brush DC motor which is used in combination with many Mech Tex gearheads. Conjunction with this motor are GB2, GB5P, GB5H, GB38OCP, GB3, GB4, GB7, GB8. Depending on the application, o/p speed, load applied, etc., the standard gearheads used in the type of gearhead can be selected. Various types of gears i.e. poly acetal, sintered iron, brass or steel gears can be used based on the requirement. Poly acetal gears damp the noise. Case hardened steel gears are always on the output for load considerations. Complete poly acetal gears are used when the output torque
required is low. Linear drive is possible with gearhead GB4, GB7 with M6 x 1 mm pitch screw. The linear guide & screw arrangement can be done only on special request.
|
|
MODEL SERIES - DC42/ DC52
PMDC GEARED MOTOR
Design - Motor DC42/DC52 is a heavy duty carbon brush DC motor which is used in combination with GBW gearhead only. Gearhead GBW contains heavily loaded steel gear wheels. The spur gears are fixed on steel spindles which are hardened and polished to a mirror finish & rotate in sintered bushings. The thick output shaft rotates in robust sintered bushings. All the gears are housed in between metal plates & closed by plastic dust cover. All bearings are permanently lubricated and therefore require no maintenance. Linear drive also possible on request.
|
|
MODEL SERIES - GEARED MOTORISED POTENTIOMETERS
DC MOTORS WITH POT ASSEMBLY
Design -
Mech-Tex offer various assemblies in which a potentiometer with different gear ratios can be mounted in series of the gear train. Thus the geared DC motor operation can be convert in to a close loop one. Suitable mounting arrangement to mount the potentiometer on the gearhead is provided. Use of suitable reduction gear ratios can make the potentiometer rotate more or less (as per requirement) number of rotations with respect to the output shaft. Thus the reading provided by the potentiometer can be more accurate.
|
|
5inch BZD Serial Pump DC Motor
Voltage : 12-48 V
Power : 2300 - 3000 W
Direction : CW, CCW
Rated Current : 2800 - 3450 rpm
O.D. : 125 mm
BZD-3.3 Serial Pump DC Motor
Voltage : 24 V
Power : 3300 W
Direction : CW, CCW
Rated Current : 3350 rpm
O.D. : 126 mm
4.5inchBZD Serial Pump DC Motor
Voltage : 12-48 V
Power : 1500 - 2500 W
Direction : CW
Rated Current : 2300 - 2600 rpm
O.D. : 114 mm
Small Serial Pump DC Motor
Voltage : 12-24 V
Power : 300 - 1200 W
Direction : CW, CCW
Rated Torque : 1.5 - 3.5 Nm
Rated Speed : > 1430 - 4000 rpm
O.D. : 84 mm
|
|
|
|