|
|
3a drum heater is a flexible panel with two coated fabrics : an heating side and an insulated side.
3a drum-heater is supplied with eyelets which, laced with an elastic rubber, lets the barrel heater lie flat on the barrel, essential condition for a good heat exchange.
In comparison with heating belts which need several main supplies and do not wrap totally the barrel, 3a barrel heater totally wraps the cylindric part of the barrel, allows smooth and homogeneous warming and, thanks to the insulated face, is maintaining temperature in the barrel for hours after you switched it off.
A utility is accessible to determine the time of heating necessary for the application.
|
|
Holroyd Silicone Side Drum Heaters (HSSD Belts)
• Silicone Rubber insulated
• Double insulated construction
• High temperature tolerance
• Simple spring catch Assembly
• 20c to 120c Thermostat
• 2 Metre Power cable
• Standard Sizes 25L, 50L, 105L, 200L
• Bespoke Sizes to order
• Ex-Stock
Holroyd Insulated Side Drum Heaters (HISD Jackets)
• Teflon coated polyester Jacket
• Water resistant
• Glass Filament Blanket Insulation
• Adjustable Quick release Buckles
• -5c to +40c or 0c to 90c Thermostat
• 3 Metre Power Cable
• Standard sizes 25L, 50L, 105L and 200L
• Bespoke Sizes to Order
• Double Insulation IP40
• Ex-Stock
Holroyd Base Drum Heaters (HBD)
• Robust steel construction
• Even heat over platen area
• 0-150c Thermostat
• 110 or 230 Volt Options
• 2 Metre armoured power cable
• Ex-Stock
|
|
Mica Drum Heater (GDH)
Heats low-melting-point solids in standard metal 55 gallon drums. Constructed of corrosion resistant nickel plated steel throughout. Features pilot light, infinite control switch, and 6 foot heavy duty rubber insulated cable.
|
|
In ECAS we manufacture heating blankets and heating bands, for the control and maintenance of the temperature of drums and containers.
Models BFVFV and BFVIBC: Consists on an electric flexible resistance placed in a blanket or band, manufactured with fabric of glass fiber.
All our heating blankets and bands, controls and regulates the temperature with a thermostat recommended due the requirements of each project.
We manufacture blankets and bands for drums from 25 to 200 litres, and containers IBC of 1000 litres, but we also fabricate custom blankets.
Drums: of 200,100, 50 and 25 Litres
IBC container: 1.000 Litres
Power (W):
Drums 200 L: 750 W, 1.000 W, 1.500 W
Drums 100 L: 750 W
Drums 50 L: 300 W
Drums 25 L: 200 W
IBC Container of 1.000 L: 2.000 W
Range temperature: 0 - 80 ºC
Types of fasteners: Velcro. Plastic buckles or clasps, Grommets
Application
Heating of drums, storage tanks, Instrumental of laboratory, etc.
|
|
|
Heating sleeves to heat segments of 200 litre barrels per DIN. both the inner and the outer sheath of the barrel heating sleeve are made of aluminium sheet, which ensures maximum protection of the electrical components against mechanical damage. A hinge with campling closure that divides the heating surface into two semi shells permits convenient assembly, without the heating element needing to be bent. The barrel can be heated complete by using 3 sleeves.
|
|
|
|
|
|
The THERMOSAFE Induction Drum Heater has been proven world wide over more than 20 years as the fastest, most reliable and safest method of melting solids from steel drums, and for the speedy heating of viscous liquids.
It is certified to the ATEX and IECEx standards for use in potentially explosive atmospheres, and is IP66 rated, so can be used in wet areas (even hosed down whilst operational!) and other harsh environments.
The external surfaces are high grade glass reinforced resins able to resist chemicals and acids, so the heater can withstand accidental splashes of hot liquids. There are no moving parts and it is completely maintenance free, so its lifetime operating costs are incredibly low.
No contact with the steel drum is required, as heat is generated by the drum wall itself, so it is exceptionally energy efficient, saving over 50% compared to conventional radiant heaters, and even more compared to steam ovens.
These units can be used individually, for example in research labs or small batch blending plants, or in groups at point of use, as highly cost effective replacements for large drum ovens.
|
|
Insulated Flexible Heating jackets for containers and drums from 20 litres up to 1200 litres in size.
High grade insulation combined with a range of custom coated fabrics allow us to offer a performance specification from "winter warming" anti-freeze applications through to melting of solids from 200 litre drums.
Power ratings are suitable for both plastic and steel containers.
The jackets are easily fitted and removed using click-in buckles and straps, and can be handled safely even after use due to the outer insulation layers.
Standard adjustable dial thermostat ranges are upto 40 degrees C or upto 90 degrees C, with options upto 160 C and digital display of temperature.
Custom sizes can also be manufactured upon request.
Standard designs available for IBC's (Intermediate Bulk Containers) from most major manufacturers.
|
|
DRUM HEATERS - for 200 litre barrels.
Drum Heaters facilitate the handling of solidified or viscous materials like adhesives, waxes, tar, chemicals, oils etc. They eliminate cumbersome methods and high investments, associated with steam and oil or fire wood heating.
Construction
Drum Heaters consist of a cylindrical metal cover carrying the flexible heating elements. A 2" thick thermal lagging of glass wool provides insulation and the metal casing makes for a rugged unit that can be wrapped snugly around the drum. The Drum Heater is hinged, and is mounted on castors for convenience. A base heater, also encapsulated in metal provides bottom heating. Control Panel incorporating thermostatic control is provided with the heaters.
|
|
|
|
|
|
Drum washing plants are particularly suitable for the continuous and at random treatment of small and medium-sized pieces, such as screws, bolts and small metal pieces in general. The material is moved forward by the slow rotation (at variable speed) of a cylinder, which contains a spiral at preset pitch. During the advancement motion, parts undergo cycles of treatment. Spiral continuous and slow rotation allows the movement of the pieces and the consequent removal of grease or swarf and drying them perfectly. The loading operations can be either manual or automated through automatic loading devices.
Ceever realization of standard machines is put side by side with the production of special cochlea realized in base to the specific demands of the client, both as regards the cycles of treatment (phosphating, de-phosphating, phosphate-degreasing, etc.) and mechanical sizing and/or special applications for automation.
In order to optimize the treatment cycles, are available, on request, several OPTIONAL:
Metering device pump for detergent
Mud dredge and chip remover
Masks of spraying
Deoiling
Filtrations
Drying and/or blowing
Additional tank
Heating to low dissipation
Weekly clock
Safety vat
Jointed nozzles
PLC and Modem
Rinse water control
Remote controls
Automatic loaders
Bases with wheels
Fumes exhaust system
Automatic fill-up
Automatic topping
|
|
The Formula 950 rotary drum washer is designed for aqueous cleaning and drying of small parts either in batches or in-line with production conveyors.
Components are first carried through immersion and power jet washes at constant speed via an Archimedes screw. After draining, they are dried by hot turbo-blown air, emerging down the exit chute clean, dry and ready for use.
Typical components which can be processed include:
* Metal, plastic and rubber parts
* Pressings and stampings
* Screws, nuts and bolts
* Springs
* Seals
* Cold forged parts
* Machined parts
This machine can also be used as a coating machine for small components.
|
|
Rosink Multi Cleaner MT: Aqueous parts cleaning with combined flush/spray system!
The Multi Cleaner MT is an economic, forward-looking, environmentally friendly, effective and compact multi-stage drum washer.
|
|
Fives Cail's beet washing installations are among the best in terms of washing efficiency, reduction of sugar loss and are especially designed to save energy. The finishing drum was especially developed for an optimized washing of the beet groove.
Advantages of finishing drum
Contact of the beet with the rubber panels: Sugar losses reduced
All of the faces of the beet undergo cleaning
With effective washing there is a reduction of :
- Quantities of knives used
- Contamination of the diffuser
- Pressure losses in filtration
Maintenance reduced : due to abrasion
Fives Cail's equipment for beet washing:
Beet extractor
Pre-washing and washing drum
Stone catcher
Weed catcher
Finishing drum
|
|
Mixed washing machines with drum
The washing plant with drum is particularly suitable for degreasing small metal parts (screws, nuts and bolts etc.).
The components to be treated are generally placed on a hopper which chokes the load of the machine.
The transport system consists of a spiralled drum which by rotating on its axis drags the pieces through the different stages of treatment and then unloads them on a chute or directly into baskets.
This is an extremely reliable and versatile plant.
|
|
Rotary drum machines (or Archimedes's screw) work with water solutions and particularly suitable for the treatment of all those items of little-mid dimensions, not so delicate, which require degreasing, rinsing and drying. Pieces are bulked loaded into the hopper (manually or through opportune device) so to arrive to the rotary drum conveyor for the treatment phases whereas the warm cleaner is sprayed violently through spraying nozzles opportunely positioned.
After the degreasing phase and chips removal during which contaminating substances are removed items go through a neutral zone for draining before being rinsed and/or passivated and finally dried with hot recirculated air.
|
|
This machine receives the product from the dry earth remover (where necessary) and carries out a final washing in preparation for the machine which follows: the centrifugal destoner. The special longitudinal showers and remixing of the product, reduce the water consumption to a minimum.
Design features:
- hot galvanized steel structure
- washing drum in AISI 304 st. st.
- longitudinal washing showers
- drive with motoreducer
|
|
| ... products without technical information |
| |
A range of products is available that has particularly been designed to meet your requirements on gravimetric filling of containers from 1 kg to 3,000 kg. You can choose from a variety of semi-automatic and fully automatic filling machines. We can offer complete systems for fully automatic packaging processes through the combination of filling equipment with our conveyor and palletising system.
Vacuum palletiser for drums type FP-VH.
A gripper with vacuum pads lifts rows of filled drums from the roller conveyor, moves them over the pallet and places them down according to the pallet arrangement scheme.
|
|
The system PM 6 allows the automatic palletisation of filled cans at high level infeed with a magnetic pick-up head.
MACHINE MODEL PRODUCT DIMENSION MAX OUTPUT cpm
PM 6 Cans Min Ø45 mm 1500
PM 6 Cans Max Ø175 mm 450
|
|
The system PDM4 allows the palletisation and depalletisation of filled cans with a magnetic pick-up head and stationary pallet
MACHINE MODEL PRODUCT DIMENSION MAX OUTPUT cpm
PDM4 Cans Min Ø45 mm 900
PDM4 Cans Max Ø175 mm 250
|
|
The system APC50 HS allows the pusher palletisation of empty cans with movable pallet
MACHINE MODEL PRODUCT DIMENSION MAX OUTPUT cpm
APC 50 HS Cans Min Ø 65 mm 1700
APC 50 HS Cans Max Ø 155 mm 280
|
|
| ... products without technical information |
| |
All our spill pallets, racks and mounts are manufactured with rotomoulding in a single HDPE piece, UV treated, with ISO 9002 certificate for food industry and compatible to a large number of chemicals.
They are stackable when empty and are provided with removable plastic grid for easy cleaning.
Safe, resistant, efficient, long-life and user friendly.
Our nice shape spill pallets are yellow painted with following advantages: to call attention avoiding accidental bumps and easy identification of drum leakages.
|
|
Pallet made of a completely angled sheet blank.
Run-in from all 4 sides with fork-lift trucks and hand lift trucks.
Suitable for one 200-litre drum.
Can be stacked when empty.
Dimensions: 586 x 586 x 130 mm
Run-in height on all sides: 100 mm
Weight: 5.5 kg +/- 10%
Load-bearing capacity: 400 kg
|
|
Main features :
- 100% recyclable stackable pallet
- Reusable pallet with long service life
- Economic, environmental and efficient alternative to wood pallets or skids
- One-piece drum pallet features four molded-in rings to secure 55 gallon drums during transportation
- Now available in fire retardant material. Approved by Factory Mutual as meeting fire requirements equivalent to wood pallets. (FM)
- Underside rings for secure double stacking
- Pallets fit side by side in standard trailers
- Ideal for use in pharmacuetical and chemical applications
- Fork Truck Entry: 4-way
- Pallet Options: Hot stamp, molded-in logo, ID plates
|
|
Vat of retention in PEHD high density treated anti UV with galvanized steel grating which can be protected by the epoxy one.
Very resistant, this vat and these pallets make it possible to store to barrels of 200 liters.
Without maintenance, the PEHD resists the majority of the corrosive substances.
Manutentionnable by lifting truck or transpallet.
Possible storage of barrels of 200L without grating thanks to its interior forms.
|
|
Vat of retention in PEHD high density treated anti UV with galvanized steel grating which can be protected by the epoxy one.
Very resistant, this vat and these pallets make it possible to store to barrels of 200 liters.
Without maintenance, the PEHD resists the majority of the corrosive substances.
Manutentionnable by lifting truck or transpallet.
Possible storage of barrels of 200L without grating thanks to its interior forms.
|
|
The JOKER screening machine is an entry-level product in the world of professional screening technology. Ease of mobility (mounted on single-axle trailer) as well as compact and rugged construction are distinguishing features of the JOKER.
The drum screen is an excellent solution for gardening, landscaping and for smaller composting sites, and anywhere mobile screen technology is used.
Advantages at a glance
* sturdy frame, mounted on highly mobile single-axle trailer
* opposing discharge belts for fine and oversized particle reduce space requirement
* screen drum with fixed hole size, or flexible system (core trommel with quick-change screen segments)
|
|
With stationary drum screens, a screening machine is available for every system size. Screens for the mid-performance range boast high operational safety with long servicing intervals. A welded screw conveyor in the drum ensures reliable material transport. Drive is provided via the proven, patented DRUMGRIP system.
Advantages at a glance
* maintenance-free direct drive minimises energy costs, wear and noise
* variable configuration for perfect adaptation to deployment and locality
* options:
o screen segment drum with segment change without dismantling drum
o special drum with anti-dirt strips for screening of residual waste
o three-fraction screening by using different screen drum hole sizes
o special carrier drum with interchangable screening segments
|
|
Drum Sieve Type TS 1260
for the separation of coarse impurities from cereals, oil seeds, maize, pulses and all similar crops.
The machine consists of the following main components:
Exchangeable sieve drum with internal worm to increase the throughput capacity and to ensure the reliable
Discharge of the coarse impurities (e.g. straw, wood particles etc.)
Brush scrapers to keep the sieve perforations clear
Aspiration connection for almost dustfree operation
With slipon geared motor suitable for continuous operation
Intake chute with additional wearing protection
Aesthetic and sturdy design, profiled metal sheet construction
The impurities are discharged by means of a rotating drum sieve.
|
|
|
|
|
|
Drum screener are used for the continuous separation of streamers respectively bird nests from plastic pellets. With the use of drum screeners downstream handling systems, problems caused by streamers and bird nests can be avoided.
Function
The rotating drum screener is gravimetrically fed with the plastic pellets containing streamers respectively bird nests. Due to the mesh size of the screener, the plastic pellets pass through the screener whereas the streamer and bird nests are retained. The streamers are trans-ported to the streamer discharge by rotation of the drum and a directional gas flow.
Design features
- reliable separation of streamers and bird nests from plastic pellets
- suitable for continuous operation due to automatic cleaning of the screener
- screen may be buffed or electropolished
- use in different operation modes (pressure, suction and circulation mode)
- easy disassembly of the drum screener
- quick-release openings for inspection and cleaning
- individual design for product requirements and throughput
|
|
|
|
see the results for the following category : 
