|
|
Applications:
heating or het-loss free transport of: oil, grease, wax, resin, tar, paint, water, carbon dioxide, plastics, sealants, etc...
Emplyable pressurised hoses of PTFE from DN 4 to 50 mm; pressure train depending on nominal width up to 600bar.
|
|
Heater Hose
Characteristics of Flexfab's silicone heater hose...
Continuous operating temperature -65°F (-54°C) to +300°F (+150°C). Nylon fiber reinforced. Resistant to coolant additives. Flexfab silicone heater hose is shipped on wooden reels or handy dispenser cartons containing 25' or 50' of hose. For high temperature applications, Nomex® reinforcement is available.
|
|
HEATED HOSES - for gas and liquid transfer.
During Gas Analyzer Sampling, Hot Melt Transfer, Petroleum or Chemical Transfers, or Food Processing, it is needed to maintain critical temperatures, to avoid condensation of gas or drop in fluid temperature. Thermo Heated Hoses aptly cater to this need, by ensuring that the fluid in the process tube (part of the heated hose), looses no heat.
These flexible and lightweight tubes can withstand aggressive high pressure fluids and high temperatures involved in transfer of fluids.
Construction
Heated Hose comprises of a process tube bundled with insulated electrical heating element and wrapped with a heat reflecting foil. Temperature sensor is provided at about 300 mm from power connection end. This bundle is insulated and provided with an outer jacket. Ends are sealed suitably and electrical connections for both power and control are brought out.
|
|
STEREO-HEAT® Impedance Heat Tracing is a direct current electric traced system across the ends of a steel or alloy pipeline section that provides even heat distribution on short to medium runs of preinsulated pipe.
STEREO-HEAT® Impedance Heat Tracing is based on the application of AC voltage across the ends of an insulated pipeline section on short and medium runs of pipe causing a current flow in the pipe walls that generates heat. This is an engineered custom designed system within ANSI/IEEE 844, NEC 426,427 and your specification requirements. This system can be retrofitted onto an existing pipe system or as part of a preinsulated PERMA-PIPE® system. Applications such as liquid food products, oil, asphalt, resins, napthalene, Urea, food oils are just a few systems that utilize STEREO-HEAT® tracing.
|
|
|
|
|
|
At ECAS, we manufacture heating cables and flexible electric elements, for temperature control systems in networks of pipes.
The main purpose of pipe tracing is to avoid and compensate for the loss of heat certain fluids undergo during particular production processes.
Of utmost importance is that the fluid or product flowing in the pipes does not freeze, change viscosity, or harm the piping network.
For sanitary hot water systems, our pipe tracing system avoids the cooling of the water, especially when it is not moving, avoiding the spread of Legionnaire disease.
Heating cable:
For pipe tracing projects we recommend constant power parallel heating cable, model CTCS.
The parallel heating cable has a constant lineal wattage even when it is cut to required length.
Control and regulating :
We have different types of control and temperature regulating solutions, which are adaptable to all kinds of projects, and/or the needs of our customers.
Below are some of the control systems:
DPA: Control and regulation box to connect between 1 and 4 circuits, from 8A to 63A at 230V.
EWDR 902 - T: Digital Thermometer/Thermostat.
ETV - 1991- P: DIN/Omega rail electronic modular analogue thermostat.
ETN - 2P - 1441: DIN/Omega rail electronic modular analogue thermostat with mini-switchboard.
|
|
Application Pontencial:
Submersible heaters, containers, valves, pumps, form, process and plate heaters.
This mineral-insulated heating cable with a braiding of high grade stell 14541 is applicable within extreme corrosive and damp surroundings. The HIL heating cable is extremely robust and easy to bend. The stainless stell brainding is waterlight, oiltight and gastight. An utilisation temperature of up to 800°C enables a variety of applications. The cold end of the heating cable can be fed into a terminal box and connected by means of a MX20X1.5 screwed connection.
|
|
|
The heating sleeve is a special physical form that can be adapted to the specifications of tubes and cartridge. Conventional dimensions as well as special shapes for one or more casks can be realised. The finished heater consist of a heated inside tube, thermal insulation and an outer jacket. Theses are available in a diverse array of high- quality materials that can be selected to match the application. The compact design with self-regulating PTC heating elements or standard heaters with integrated regulation guarantee optimal functionality and the highest level of safety.
|
|
CH-Constant Watt High Temperature Maintenance Electric Trace Bundles
Maintain Temperatures up to 400˚F (204˚C)
Process Tubes 1/4” to 1/2” O.D. (6mm to 12mm) - Single or Dual Tube Designs
Applications:
Analyzer, impulse and instrument lines; small diameter process lines, stack gas sampling lines; and utility lines.
|
|
| ... products without technical information |
| |
|
|
|
|
Viking, Saracen & Saxon layflat hoses
Viking fire hoses are chosen by fire fighting professionals throughout the world for their quality, performance and reliability. It is constructed with an all synthetic woven textile reinforcement encased in a blend of high tensile PVC/Nitrile rubber which forms a unified lining and cover. The outer ribbing provides excellent abrasion resistance. Viking fire hose is independently tested to BS 6391 :Type 3 1983 by RAPA Technologies.
Saracen fire hoses are for use where fire fighting is less frequent or intensive. Saracen offers an affordable alternative to Viking without any performance penalty. It is constructed in the same layered way to the Viking though without the heavy protective ribbing, nitrile-PVC is used which makes the hose lighter.
Saxon fire hoses are built to the highest quality, lightweight but with exceptional strength. They are used by fire brigades and industrial users worldwide. Available with a polyeurethane outer coating for extra abrasion resistance or uncoated for lightness, they are ideal as washdown hose.
|
|
Tube: Synthetic rubber blended, black and smooth
Reinforcement: textile braided high tensile synthetic yarn
Cover: special synthetic rubber blended, black or red, weather and ozone resistant
Application: for fire fighting vehicles or use on hose reels for fixed installations.
Temperature: -30℃～+80℃
Length: as request
Packing: P.V.C. film, reel packing available
|
|
APPLICATIONS: For use on hose reels in buildings and factories for first aid fire fighting purposes.
TUBE: Synthetic rubber.
REINFORCEMENT: High tensile synthetic textile filament yarn.
COVER: Red.
COLOR: Ozone and weather resistant synthetic rubber.
SURFACE: Smooth.
OPERATING TEMPERATURE:-20°C - +80°C
|
|
The Variacor® system, internationally patented, makes all rigid hosing flexible and multi-directional, whatever may be the pressure.
-Increases pliability of fire hose, less effort due to hose rigidity,
-Makes easier using fire hose in hard to access area,
-Reduces step backwards when handling fire hose.
|
|
Macron produce a comprehensive range of hose fittings in aluminium, gunmetal and other alloys to British, American and other international standards. They can be produced to a customers' specifications in a variety of materials and finishes including polishing, anodising and chrome plating.
-Delivery hose couplings
- Branchpipes and nozzles
- Blank caps and plugs
- Adaptors
- Collection heads and manifolds
- Breechings
- Suction hose couplings and wrenches
- Suction strainers
- Standpipes and hydrant keys
|
|
|
|
|
|
General description : 55 Series
Macron's range of hose reels combine high performance and a rugged space saving design. Manufactured without compromise the 55 Series is renowned for its quality and long-term reliability derived from cutting edge technology and world-class production
55 Series hose reels are available in manual or automatic versions. Manual versions are fitted with a ball or a gate valve. The automatic format actuates as the reel is rotated removing the need for the user to turn on the water supply - an important safety consideration. All models are available with 19mm or 25mm bore hoses.
The range includes fixed and swinging variants. Swinging hose reels are available in right and left hand formats suitable for surface or recess mounting.
55 Series hose reels are manufactured to BS EN 671-1:2001 and carry the CE mark through BSI notified body number 0086.
Features
- Wide range of sizes and capacities
- Easy 'hose-on' installation and maintenance
- Automatic or manual versions
- Bronze axles and nylon bearings for long life and dependability
- Supplied fully assembled
- Fixed reels available with flexible inlet piping
- Optional floor pedestals
- Offshore manual versions
- CE marked
|
|
Macron hosereel cabinets have a space saving design with hose reel and cabinet doors that open a full 180 degrees for ease of access and use. They can be surface mounted or recessed with architrave and are finished in red epoxy powder coat as standard. The cabinets are universal with left or right hand opening and four knock out water entry points per cabinet.
Macron hosereel cabinets are constructed from 16swg zinetec steel with a red recessed latch type handle for an attractive flush finish.
Features
- Door & hose reel swing out a full 180 degrees
- Red expoxy poswer coated standard finish, other colours available
- Solid or glass fronted door
- Stainless steel door option
- Surface or recessed mounting
- Top or bottom water entry
- Right or left hand swinging
- Supplied fully assembled and tested
|
|
New from Tyco Fire Suppression & Building Products, Grinnell's G-Press(TM) Piping System is a complete piping system for a sprinkler fire protection installation, offering lower system costs, shorter installation times, reduced installation waste/clean up and is approved to international fire standards.
G-Press systems have been developed to meet the growing need for quicker, more precise sprinkler pipe installations together with the expectation of increased safety and security.
The range includes G-Press Fittings (using the G-Press Fitting Connection Method), the G-Press Passive Leak Monitoring (PLM) Sealing Ring and the G-Press Tube.
|
|
Fire Protection Sleeves
Designed to avoid the expenses of fireproof ducting, the sleeves are efficient and cost effective.
Two semi-circular metal shells are lined with intumescent material that when heated expands making a fire barrier.
|
|
| ... products without technical information |
| |
Suction and blower hoses for temperatures from -20 °C up to +280 °C, DN 40 up to DN 900
Applications:
extraction af gaseous media: air conditioning and ventilation industry, suction plants, ventilation and suction, welding fume extraction (with increased spark concentration), tent heating, in areas with raised safety requirements, low pressure applications
Properties:
- highly flexible
- compressible
- small bend radius
- external steel helix protects against abrasion
Connecting elements:
- hose clamps
- hose connectors
- hose reducers
|
|
Gokser Machine Co Ltd founded in 1987 ,primarily manufactures air ducts which are capable of being bended ,folded to be reduced to be lengthened.Ducts are manufactured with different sizes and materials interms of their suitability with its ease of use,convenience and efficiency for air and other gas fluids transfer at industrial systems,with the heating rande of -40 ºC to +1100 ºC .
Please ask for our compatible prices of our high quality products
|
|
|
Polyurethane and TPV Hoses; abrasion resistant, hot-air, semi-flexible, hardly inflammable, microbe and hydrolysis resistant, food and pharmaceuticals, antistatik and electrically conductive hoses, fully flexible ducts.
|
|
Oil Vent is a single wall vent connector and is designed to make connections between appliance and common vent such as masonary chimney, or z-flex liner products both easy and economical.
|
|
|
|
|
|
DOSPEL Professional is the only Polish manufacturer of integrated duct ventilation systems RSystem type.
In the ducts manufactured by DOSPEL the ending is turned inside out and formed with the shape of a frame profile. All elements are 100% repeatable, fit ideally one to each other and therefore there is no necessity of using any sealing substance. The connection is non-invasive, so the zinc layer on the metal sheet doesn’t get damaged. The ducts manufactured with the RSystem technology are very durable.
The ducts are manufactured out of zinc metal sheets or, on the customer’s wish, out of acid-resistant, aluminium or black metal sheets.
Thank to the most modern technology and wide range of used metal sheet tightness, we manufacture the installation elements in following pressure classes: 1, 2, 4 and 5 (standard: class 1 and 4)
Thank to the special sealing of frame connections, the DOSPEL standard is tightness class A, B.
All moulders are dimensioned according to DIN 18379 norm, which ensures the uniformity and repeatibility of elements.
Wanting to fit to Customers needs, the company has diversified the range of normalized elements for moulders with not occurring norms, but often met in the projected ventilation currents.
Depending from the Customers demands, all elements can be protected with an additional warming up layer (mineral wool or mineral wool with additional metal or aluminium casing) already on the prefabrication stage, which significantly improves protections quality and accelerates the subsequent mounting of elements on the place of construction.
|
|
| ... products without technical information |
| |
|
|
see the results for the following category : 
