|
|
3a drum heater is a flexible panel with two coated fabrics : an heating side and an insulated side.
3a drum-heater is supplied with eyelets which, laced with an elastic rubber, lets the barrel heater lie flat on the barrel, essential condition for a good heat exchange.
In comparison with heating belts which need several main supplies and do not wrap totally the barrel, 3a barrel heater totally wraps the cylindric part of the barrel, allows smooth and homogeneous warming and, thanks to the insulated face, is maintaining temperature in the barrel for hours after you switched it off.
A utility is accessible to determine the time of heating necessary for the application.
|
|
2000W: 1 heating flexible cover protected by two impregnated fabrics (a heating face and an insulated face) + 1 integrated lid
The Heater of IBC 3A allows a good application on the IBC, essential condition with a good heat exchange.
Advantages:
- One only feeding circuit
it quality of the heat insulator limits the losses and guarantees an effective and homogeneous heating,
it lid integrated into the cover, allows the filling without disassembling.
- Flaps make it possible to limit the losses under the ibc, they allow also the passage of the forks for handling.
Technical description:
Nominal nominal output: 2000 W
Standard tension: 230 V
Electric cable 3x1,5 ²: L 2m
External dimensions: 1000x4400
Color heating face: red
Color insulated face: blue
Index of protection: IP54
max. t° of maintenance (under tension): +60°C
max. t° of exposure (not under tension): +80°C
Integrated thermal protection: +80°C
|
|
3a IBC warmer is available with 2 different outputs:
- 3000W : a set of 4 heating flexible watertight pannels (1 heating red side and 1 insulated blue side) + 1 insulated top cover
- 1500W :a set of 2 heating flexible pannels (1 heating red side and 1 insulated blue side) and 2 insulated pflexible pannels + 1 insulated top cover.
3a IBC warmer is made of flexible pannels which you can fit together with gripping belts ; this way of gathering is good to lay heating pannels on containers, requirement necessary to get efficient heat exchange.
Avantages :
• Every of the heating parts is independant.
• Heat losses are restricted by efficiency of insulation.
• Thanks to the top cover opening, there is no need to put away the IBC warmer to fill in the container..
• A utility is available to determine the time of heating necessary for the application.
|
|
Holroyd Silicone Side Drum Heaters (HSSD Belts)
• Silicone Rubber insulated
• Double insulated construction
• High temperature tolerance
• Simple spring catch Assembly
• 20c to 120c Thermostat
• 2 Metre Power cable
• Standard Sizes 25L, 50L, 105L, 200L
• Bespoke Sizes to order
• Ex-Stock
Holroyd Insulated Side Drum Heaters (HISD Jackets)
• Teflon coated polyester Jacket
• Water resistant
• Glass Filament Blanket Insulation
• Adjustable Quick release Buckles
• -5c to +40c or 0c to 90c Thermostat
• 3 Metre Power Cable
• Standard sizes 25L, 50L, 105L and 200L
• Bespoke Sizes to Order
• Double Insulation IP40
• Ex-Stock
Holroyd Base Drum Heaters (HBD)
• Robust steel construction
• Even heat over platen area
• 0-150c Thermostat
• 110 or 230 Volt Options
• 2 Metre armoured power cable
• Ex-Stock
|
|
Mica Drum Heater (GDH)
Heats low-melting-point solids in standard metal 55 gallon drums. Constructed of corrosion resistant nickel plated steel throughout. Features pilot light, infinite control switch, and 6 foot heavy duty rubber insulated cable.
|
|
|
|
|
|
HIBC/B Heater Jacket:
• Teflon/Polyester Jacket
• Dual power circuits
• Thermally insulated
• Adjustable quick release buckles
• 0-40c or 0-90c Thermostat
• Bespoke sizes to order
• 3 Metre power cable
• Double insulation IP40
• Ex-Stock
Size: 1000mm x 4400mm (3900mm Heated Length)
Rating: 110 or 230 Volts 2 circuits each 1000 watts.
Temperature Control: 0c to 40c or 0c to 90c
HIBC/A Heater Mat:
Rating: 2700 Watts 230 Volts AC
Temperature control: 20c - 90c Electronic controller (Digital readout)
The HIBC/A silicone heater mat comprises of a high temperature resistance wire element laminated between silicone/ glass sheets.
A PTC temperature sensor is also embedded between the sheets. This connects to an electronic temperature controller via the heater power cable and provides accurate measurement and fast response to temperature changes at the bottom of the IBC liner. This makes the heater suitable for both high-energy absorbing products and highly viscous, temperature sensitive materials.
|
|
In ECAS we manufacture heating blankets and heating bands, for the control and maintenance of the temperature of drums and containers.
Models BFVFV and BFVIBC: Consists on an electric flexible resistance placed in a blanket or band, manufactured with fabric of glass fiber.
All our heating blankets and bands, controls and regulates the temperature with a thermostat recommended due the requirements of each project.
We manufacture blankets and bands for drums from 25 to 200 litres, and containers IBC of 1000 litres, but we also fabricate custom blankets.
Drums: of 200,100, 50 and 25 Litres
IBC container: 1.000 Litres
Power (W):
Drums 200 L: 750 W, 1.000 W, 1.500 W
Drums 100 L: 750 W
Drums 50 L: 300 W
Drums 25 L: 200 W
IBC Container of 1.000 L: 2.000 W
Range temperature: 0 - 80 ºC
Types of fasteners: Velcro. Plastic buckles or clasps, Grommets
Application
Heating of drums, storage tanks, Instrumental of laboratory, etc.
|
|
|
Heating sleeves to heat segments of 200 litre barrels per DIN. both the inner and the outer sheath of the barrel heating sleeve are made of aluminium sheet, which ensures maximum protection of the electrical components against mechanical damage. A hinge with campling closure that divides the heating surface into two semi shells permits convenient assembly, without the heating element needing to be bent. The barrel can be heated complete by using 3 sleeves.
|
|
|
|
|
|
The THERMOSAFE Induction Drum Heater has been proven world wide over more than 20 years as the fastest, most reliable and safest method of melting solids from steel drums, and for the speedy heating of viscous liquids.
It is certified to the ATEX and IECEx standards for use in potentially explosive atmospheres, and is IP66 rated, so can be used in wet areas (even hosed down whilst operational!) and other harsh environments.
The external surfaces are high grade glass reinforced resins able to resist chemicals and acids, so the heater can withstand accidental splashes of hot liquids. There are no moving parts and it is completely maintenance free, so its lifetime operating costs are incredibly low.
No contact with the steel drum is required, as heat is generated by the drum wall itself, so it is exceptionally energy efficient, saving over 50% compared to conventional radiant heaters, and even more compared to steam ovens.
These units can be used individually, for example in research labs or small batch blending plants, or in groups at point of use, as highly cost effective replacements for large drum ovens.
|
|
Insulated Flexible Heating jackets for containers and drums from 20 litres up to 1200 litres in size.
High grade insulation combined with a range of custom coated fabrics allow us to offer a performance specification from "winter warming" anti-freeze applications through to melting of solids from 200 litre drums.
Power ratings are suitable for both plastic and steel containers.
The jackets are easily fitted and removed using click-in buckles and straps, and can be handled safely even after use due to the outer insulation layers.
Standard adjustable dial thermostat ranges are upto 40 degrees C or upto 90 degrees C, with options upto 160 C and digital display of temperature.
Custom sizes can also be manufactured upon request.
Standard designs available for IBC's (Intermediate Bulk Containers) from most major manufacturers.
|
|
DRUM HEATERS - for 200 litre barrels.
Drum Heaters facilitate the handling of solidified or viscous materials like adhesives, waxes, tar, chemicals, oils etc. They eliminate cumbersome methods and high investments, associated with steam and oil or fire wood heating.
Construction
Drum Heaters consist of a cylindrical metal cover carrying the flexible heating elements. A 2" thick thermal lagging of glass wool provides insulation and the metal casing makes for a rugged unit that can be wrapped snugly around the drum. The Drum Heater is hinged, and is mounted on castors for convenience. A base heater, also encapsulated in metal provides bottom heating. Control Panel incorporating thermostatic control is provided with the heaters.
|
|
Rectangular steel container for temporary storage of fluorescent light tubes and light bulbd. Flap lid.
Forkliftable.
Removable inner Big Bag included.
Exterior corrosion-proof treatment by oil- and acid- proof polyurethane resins, painted in safe visible colours . Safety labelling according in force regulations.
|
|
CONTAINERS FOR EXHAUSTED BATTERIES
84/P:
HDPE Container with steel cradle for temporary storage of different waste, assembled and labelled for specific usage. Made of anti-oil and antacid polyethylene, UV treated to permanent exposition to the atmospheric agents, compliant with OSHNER, DIN and AFNOR regulations.
Single mould, reinforced carbon steel cradle allowing the container stacking, lifting, forklifting and tilting.
84/L:
HDPE container for temporary storage of different waste, exhausted batteries, assembled and labelled for specific usage. Protection cradle entirely made of WATERTIGHT steel.
Personal safety and antipollution labelling in compliance with national and community laws.
|
|
Bunded Waste Oil Tanks
Tuffa 1400VBWOS
Capacity: 1400 litres / 300 gallons
Dimensions: 1576mm (DIA) x 1800mm (H)
Product Description - Complete with:
* Tundish
* Filter
* Vent
* Easy access yellow flip lid
A Tuffa Waste Oil Tank would benefit businesses in the motoring industry such as Garages, Bus Depots, Haulage companies etc. It will ensure that the waste oil is stored safely and securely at a reasonable price.
The Tuffa bunded waste oil tanks are designed with pollution control in mind and are manufactured to all appropriate current legislations with in the oil industry, pending correct installation. bunded waste oil tanks come in a range of sizes
|
|
Stock batteries SB 60 is a steel receptacle which makes it possible to integrate a polyethylene case of 600 liters for the storage of the worn batteries (60 to 70 batteries). Tubular steel structure; Metal lid rise on 2 compass-gases with handle of opening, lock 2 points and keys. Pastes of fixing on the ground
OPTION: case polyethylene.
SB 60 protects the batteries from the bad weather thanks to its metal lid rise on 2 compass-gases and avoids especially the flight of the batteries since it is equipped with a lock 2 points. it has moreover of the pastes of fixing to avoid any inopportune displacement. Its anti-corrosion completion and painting polyurethane protect it perfectly from the bad weather and rays UV.
|
|
|
|
|
|
These containers of recovery of waste oils of the SEMI type industrial Modhuile are equipped with a double tank of retention out of polyethylene, in conformity with standard XP-H-96618 and the decree of April 7th, 1997. Capacities: 600,1350 or 2500 liters. Broad funnel with boltable lid to pour waste oils. When the collector is full it is enough with the oil pick-up to remove the grid of filtration of the funnel and, to plunge its nozzle of aspiration to carry out draining. Finally it are equipped out of standard with a gauge with level and, of an electronic system of detection of escapes between the 2 tanks.
IN OPTION: Connection fireman DNN 50 if you do not want us that the oil pick-up uses the funnel of discharge to carry out draining collector as it is full.
This polyethylene collector answers perfectly a use in saline medium or corosifs. Simple of use, Their respective capacities of 600,1350, and 2500 liters meet the needs for each one. The gauge of level will enable you to know when the collector is full and will avoid any inopportune overflow. Its double tank of retention, in conformity with the regulations in force avoids any accidental pollution Enfin its system of detection ant-escape between the 2 walls will inform you in the event of escape of the receiving tank. Modhuile indistrielle of SEMI type fulfills the environmental requirements thus perfectly
|
|
|
|
|
|
Container of worn engine oil recovery standard M 1200 cd. This container is équipéd' a double tank of retention in conformity with standard XP-H-96618 and with the decree of the 4/7/1997, Its low part out of steel or stainless with an oil storage capacity of 1200 liters and its high part out of polyethylene has a receptacle for the storage of the empty cans of 750 liters. These other characteristics: measure level, counter of discharge of great capacity, connection of pumping DNN 50 standardized for the draining of the collector, ring of levage.FABRICATION FRENCH
This worn oil collector offers an excellent report/ratio QUALITE/PRIX. Its gauge of level will enable you to see when the collector is full and, that will avoid any inopportune overflow thus. Its under anti-corrosion layer and its completion in partly low painting polyurethane protects it from the bad weather and UV; Its high part out of polyethylene is appropriate perfectly for a use in saline medium. Finally its double tank of retention in conformity with standard XP-H-96618 and the decree of the 4/7/1997 avoids any inopportune pollution in the case or the receiving tank would be bored. He fulfills the environmental requirements thus perfectly
|
|
|
|
|
|
Container of worn engine oil recovery standard R1000 or R 1500. These containers entirely metal are equipped with a double tank of retention in conformity with standard XP-H-96618 and with the decree of the 4/7/1997, they have a respective oil storage capacity of 1250 or 1700 liters and 800 and 1250 liters for the storage of the empty cans. Another characteristics: measure level, counter of discharge of great capacity with shutter of protection and automatic system of locking per float when the collector is full, connection of pumping DNN 50 standardized for the draining of the collector. FRENCH MANUFACTURE
This worn oil collector, entirely metal, is robust and, an increased protection against the fire and vandalism offers. Its broad counter of discharge is equipped with a rain-proof shutter and an automatic system of locking when the collector is full: that avoids any inopportune overflow thus. Its under anti-corrosion layer and its completion in painting polyurethane protects it from the bad weather and of UV and, thus guarantees to him an optimal lifespan. Finally its double tank of retention in conformity with standard XP-H-96618 and the decree of the 4/7/1997 avoids any inopportune pollution in the case or the receiving tank would be bored. He fulfills the environmental requirements thus perfectly
|
|
|
|
|
|
This container of recovery of waste oils or the effluents (gray water or black water) with double tank of retention, out of polyethylene, is in conformity with standard XP-H-96118 and the decree of the 4/7/1997. With capacity 2500 and 5000 liters, it is equipped with an electric or manual pump and a nozzle of aspiration.
Other characteristics: trap door of access to the boltable pump, measures level, electronic system of detection of the escapes between the two walls, indicator digital of level with remote sensing, Raccord FIREMAN DNN 50.
It at summer especially conceived for the marinas.
it makes it possible to directly aspire waste oils or effluents to the source. Its great capacity makes it possible to space the draining of the collector. Its system of sensing remote when the collector is full allows to the person in charge of management waste not to systematically on the spot check the level of filling of the collector.
Its polyethilene structure protects it perfectly from the saline air and corrosion.
|
|
| ... products without technical information |
| |
World Class/Just-In-Time Packaging System minimizes inventory, lead time and labor costs. Fills and caps from 90 oz to 300 oz containers at speeds of up to 20+ cases per minute and a smooth conversion from a trailer with empty cased containers to a trailer load of filled, cased containers in as little as two hours.
Machine Type: In-Case filler
Metering Systems: Piston, Lobe, Gear, Flow Meter, Positive Displacement, Rolling Diaphragms
Container/Closure: Glass, Plastic, Stoppers, Overcaps
Application: High Volume Production, Contract Packaging, Quick Changeover, Pilot Plant, OEM Applications, Cost Reduction, Spare Parts/ Service
Industry: Pharmaceutical, Biotechnology, Cosmetic, Food/Beverage, Healthcare, Personal Care, Chemical Specialty, Diagnostics, Veterinary
Product: Viscous, Semi-Viscous, Water Thin, Lotion, Cream, Gel, Thixatropic, Particulate Laden Material, Shampoo, Adhesives, Laundry Detergent, Stick Deodorant
|
|
|
Effortlessly fills molten liquids such as stick deodorant, anti-perspirant, lipstick, candle wax, petrolatum base product with ease and precision. Controlled environment filler provides simple, trouble-free filling up to 200 degrees Fahrenheit.
|
|
|
|
|
|
Accommodates a wide variety of liquid filling applications and fluid types. Easy to read touch screen with electronic volume adjustment controls for speed and ease of set-up. Piston pumps fill low, medium and high viscous product of 1 liter or less. The DFS trolley system allows for changeover in as little as five minutes!
Machine Type: DFS Dockable Piston Filling Machine
Metering Systems: Piston, Lobe, Gear, Flow Meter
Container/Closure: Glass, Plastic, Stoppers, Overcaps, Child Resistant, Tamper Evident, Dropper Tip, Nalgene, Pen
Application: High Volume Production, Samples, High Accuracy, Contract Packaging, Research & Development, Quick Changeover, Test lab, Pilot Plant, Clean Room, OEM Applications, Hotel Amenities, Cost Reduction, Pen Filling
Industry: Pharmaceutical, Biotechnology, Cosmetic, Food/Beverage, Healthcare, Personal Care, Chemical Specialty, Diagnostics, Veterinary
Product: Viscous, Semi-viscous, Water Thin, Lotion, Cream, Gel, Particulate Laden Material, Shampoo, Laundry Detergent
|
|
2-HEAD NET-WEIGHT LIQUID FILLING MACHINE
Shown as designed for quart through 5-gallon open top containers.
Additional filling carts enable line operators to perform changeover in as little as 5 minutes. Because the carts are permanently connected to the filler, these systems eliminate the clumsy disconnecting process to switch carts between batches. These systems have pre-programmed, adjustable cleaning controls menus for automatically cleaning while filling with multiple carts.
- Fill head spacing can be customized to fit your containers.
- Fill head quantity can be varied to meet your fill rates.
- Clean-top design makes cleaning easy...no more mess, no more messy drip pans.
- Quick change scale decks for fast container changeover.
- Servo-driven design for faster, accurate fill cylcles.
|
|
The automatic FRICKE filling systems are designed to fill all standard size single containers in any desired way.
Advantages:
- Automatic weight settings
- Time consuming settings by the operating personnel at the weighing terminal have become almost fully unnecessary as the system automatically suggests the various setpoint and tare weights, frequencies
|
|
ZB linear gravity fillers are suitable to fill liquid products into empty or already pre-filled containers.
CONTAINERS
The machines can handle rigid round metal and glass containers having a filling capacity up to 5 Kg..
CAPACITY
From 10 to 1000 c.p.m. according to the product and container size..
PRODUCTS
- brine
- gravy
- syrup
- vinegar
|
|
|
|
see the results for the following category : 
