Hexagonal nuts

... adjustment screws, car seats, screw, shaft buggies/round nails, step screws, stainless steel screws, non-standard screws, lock nut four shackles, furniture, furniture wood screws, carriage screws, electronic screws, ...

Nominal diameter: 2 mm - 64 mm

NUTS HEXAGONAL NUTS DIN 934 ZN (similar ISO 4032) ZINC PLATED HEXAGON NUT

Nominal diameter: 6 mm - 150 mm

GI Fittings Pipe Back Nut Maximum Pressure: - 25 BAR (363PSI) (2.5MPA) CLASS 150 Maximum Temperature: - 200°C (392°F) Tensile Strength: - 350MPA Suitable Applications: - Water, Oil, Gas, Petro-Chemical Product ...

Available in case hardened carbon steel or stainless steel Precision machining assures threads are square with base If the size you require is not listed...give us the specifications… we will make it for you.

Nominal diameter: 1 mm
Height: 0.8 mm
Width: 2.5 mm

M1 Hexagon Full Nut to DIN Finish Zinc & Clear Cr3 Old Web Reference W/M1/-/HFG8- Standard DIN 934 ~ISO 4032 Material Grade 8 Steel Availability Preferred

... cold working procedure. The tapered end of the fitting is secured with the tapered end of the tubing with the help of a flare nut producing a pressure-resistant, leak-tight seal. These flare fittings are very durable ...

Nominal diameter: 6 mm - 50 mm
Height: 15.5 mm - 44.2 mm

For 37°-Flare Couplings To SAE J 514 and ISO 8434 Part 2

Nominal diameter: 4 mm - 12 mm
Height: 11 mm - 27 mm

The FTTEC-ERC is a hexagonal threaded closed-end insert, manufactured by FAR. This product is used with the contact to liquid to avoid the passage. In addition, for the screw length calculation to use for the closed ...

Width: 7 mm - 27 mm

... Description Counter nut for turnbuckle A4 M4 left Counter nut for turnbuckle A4 M5 left Counter nut for turnbuckle A4 M6 left Counter nut for turnbuckle A4 ...

1)Flange Nut DIN6923 (Hexagon nuts with serrated flange ISO metric coarse pitch thread; ) 2)Available Size: M2 to M20 3)Class: 6,8(6S), 8, 10 4)Material: low carbon steel or mild carbon steel, according ...

Hex Nut Hex Nuts, Hexagonal nuts, Hexgon nuts Hex Nuts 1) Standard: DIN934/439, ANSI/ASME, BS, GB, JIS, ISO4032. 2) Material: ...

Nominal diameter: 0.5 in - 1.25 in
Height: 1.5 in - 1.75 in
Width: 0.75 in - 1.13 in

BAN: Bung Adjuster Nut Material: 5135 Chrome steel (not chrome moly) Special Feature: Allows for adjustment with thread bung.

Nominal diameter: 8 mm
Width: 13 mm

Techn. Data / Items supplied • - Steel, galvanized • - Thread (d) : M 8 • - Weight = 0.009 kg/piece

The WGN-6 is a spare nut for the WGF-6, WGF-461 and WGF-4 while the WGN-12 is a spare nut for the WGF-12. The WCN-6 is a brass coupling nut for use with a WEB brass Waveguide Extension ...

Nominal diameter: 3 mm - 10 mm
Height: 3 mm - 6.5 mm

Self clinching nuts with anchoring flutes, threaded studs and threaded spacers for thin metal sheets. Advantages : Considerable clamping strength, higher than that of a class 8.8 steel screw. Dimensions : From M3 ...

P-F Flush Self-Clinching Nuts have been designed to provide a thread within the sheet thickness to provide a flush finish to both sides. A simple squeezing action embeds the hexagonal head into the sheet, ...

Nominal diameter: 36 mm
Height: 3 mm

Bolt / nutNut Forged / Turned Turned Quality TiAl6V4 Surface protection

Nominal diameter: 3, 5, 6, 8, 10 mm
Height: 5.5, 8, 10, 13, 17 mm
Width: 4, 6.5, 7.5, 10, 12.5 mm

Material: PA 6.6 25% C.V. UL Flammability: HB (UL 94) Colour: See table All dimensions are in mm.

The choice of qualified suppliers makes our products a real guarantee for our clients. We offer fastener and bolt items previously subjected to a careful manual selection by our co-workers and which are then processed to obtain a high-quality ...

Nominal diameter: 6 mm - 30 mm
Height: 14 mm - 58 mm
Width: 9 mm - 45 mm

Collar Nut Key Features The Collar Nut is Turned & Milled Heat Treated Nut to Strength Class 10 Nut to DIN 6331 Collar Nut DIN 6331 Also known ...

Height: 0.875 in - 2.5 in

Used for set up work on machine tools. Made from cold finished steel, case hardened with a black oxide finish.

Nominal diameter: 4, 5, 6, 8, 10 mm
Height: 12, 13, 16, 17.5, 21 mm

Nominal diameter: 6 mm - 30 mm
Height: 9 mm - 45 mm
Width: 10 mm - 46 mm

Nominal diameter: 3 mm - 10 mm
Height: 8.5 mm - 22 mm
Width: 5.5 mm - 16.3 mm

Available in Steel and Stainless Steel. Dome and countersunk head. High torque to-turn resistance in all materials.