Flow: 32 m³/h - 91 m³/h
Pressure: 150 psi - 700 psi
Head: 99 m - 102 m
Specifically designed for re-circulating service in reverse osmosis and other membrane systems. Equipped with balanced double shaft seal with buffer fluid ports on top and bottom for complete removal of air/vapor from seal chamber. ...
Flow: 0 m³/h - 68 m³/h
Pressure: 0 psi - 1,250 psi
... other membrane systems, the 200MS Series multistage pumps offer lower start-up and run costs due to the high efficiency, two impeller design. Features These pumps produce a smooth, ...
Flow: 0 l/s - 1,500 l/s
Pressure: 45, 100 bar
Head: 0 m - 150 m
... reactor pump developed for high temperature and high pressure applications in the chemical and petrochemical industries. Since many years a reference ...
Flow: 0 l/s - 8,300 l/s
Pressure: 6, 4 bar
Head: 0 m - 10 m
The typical pump for large capacity at low discharge heads (circulation pump with axial impeller). Available in welded or cast construction with reinforcing ribs. Applications Crystallisation ...
Flow: 0.5 m³/h - 8 m³/h
Pressure: 0 bar - 100 bar
Head: 0 m - 45 m
... realised with a reactor pump. For this reason, Egger has developed a pilot pump S that meets all requirements for commercial process pumps. This series has been designed for boundary ...
Flow: 0 m³/h - 5.5 m³/h
Pressure: 0 bar - 900 bar
Power: 13.2 kW
Mouvex reciprocating triplex plunger pumps cover most applications in the oil and gas industry, both offshore and onshore, and in the petrochemical field, especially when high pressures ...
Flow: 0 m³/h - 10 m³/h
Pressure: 0 bar - 900 bar
Power: 36.7 kW
Mouvex reciprocating triplex plunger pumps cover most applications in the oil and gas industry, both offshore and onshore, and in the petrochemical field, especially when high pressures ...
Flow: 4 m³/h - 17 m³/h
Pressure: 5 bar - 15 bar
Power: 7 kW - 11 kW
HIGH PRESSURE (ALH) PERISTALTIC HOSE PUMP - ALBIN PUMP - Volumetric flow between 8 to 17 m3/h (35-75 gpm) - No mechanical seal or stuffing box - Robust, ...
Albin Pump
Flow: 21 m³/h - 54 m³/h
Pressure: 1 bar - 15 bar
Power: 15 kW - 22 kW
HIGH PRESSURE (ALH) PERISTALTIC PUMP - ALBIN PUMP - Volumetric flow up to 54 m3/h (238 gpm) - No mechanical seal or stuffing box - Robust, entirely ...
Albin Pump
Flow: 2 l/h - 20.4 l/h
Pressure: 1 bar - 8 bar
Head: 9.8 m
HIGH PRESSURE (ALH) PERISTALTIC PUMP - ALBIN PUMP - Volumetric flow up to 20,4 l/h (5 gph) - No mechanical seal or stuffing box - Robust, entirely ...
Albin Pump
Flow: 50 l/min
Pressure: 70 bar - 5,000 bar
... tensioning, and other high pressure applications. Benefits & Features Minimize maintenance time by replacing check valves in a few minutes It is simple to convert a single acting pump ...
Flow: 36.5 l/min - 53.9 l/min
Pressure: 30, 40, 20 bar
Power: 0.3 kW - 5.2 kW
... Viton available on request). Parts in contact with spray liquid: anodized aluminium. Standard: safety valve. On request: pressure accumulator and PTO protection. Cataphoresis treatment on motorpump versions.
COMET Spa
Flow: 24.3 l/min
Pressure: 560 bar
Height: 1,357 mm
... operated piston pumps. High flow double acting pumps with high pressure delivery for use in lubrication systems that require a combination ...
SAMOA Industrial, S.A.
Flow: 16.5 l/min
Pressure: 490 bar
Fluid temperature: 20 °C
... piston pumps. High pressure double acting pump for use in applications that require extra pressure output or when cold temperatures a low air pressure ...
SAMOA Industrial, S.A.
Flow: 1.2 l/min
Pressure: 550, 10 bar
Height: 710 mm - 1,120 mm
air operated piston pumps. Light weight and effective high pressure delivery air operated pumps specially designed for use in mobile and portable greasing units. Pumps ...
SAMOA Industrial, S.A.
Flow: 74 us gal/min
Pressure: 17, 17.2 bar
Length: 655 mm
... CSA standards, the GH2 pump is used extensively in upstream and midstream applications. This 2:1 high-pressure pump, with a unique air distribution system, is capable ...
WARREN RUPP
Flow: 0 us gal/min - 990 us gal/min
Pressure: 0 psi - 350 psi
Fluid temperature: 14 °F - 212 °F
... stainless steel, with a choice of rotor and stator materials • High pressure / long haul pumping, eliminating the need for a series of pumps when pumping over long distances or with ...
NOV Inc.
Flow: 0 us gal/min - 200 us gal/min
Pressure: 0 psi - 225 psi
Fluid temperature: 14 °F - 350 °F
... shear, accurate, repeatable flow • Viscosities to 1,000,000 cps • Handles solids to 1" in diameter • Pressures to 2,100 psi; capacities from .02 to 450 gpm Typical Applications • moyno l frame ...
NOV Inc.
Flow: 0 us gal/min - 1,850 us gal/min
Pressure: 0 psi - 350 psi
Fluid temperature: 14 °F - 212 °F
... for difficult applications, i.e. super duplex stainless steel • High pressure/long haul pumping eliminates the need for a series of pumps when pumping over long distances or with high ...
NOV Inc.
Flow: 20 l/min
Head: 15 m - 220 m
Power: 0.48 kW - 2.2 kW
... can be used as boosting pumps if provided with positive inlet pressure. This inlet pressure can be provided by the central coolant supply or a feed pump. ...
Brinkmann Pumpen
Flow: 16.2 l/min - 47.4 l/min
Pressure: 10 bar - 200 bar
Power: 0.7 kW - 12.5 kW
Screw spindle pumps with their silicon carbide spindle housing and highly wear resistant spindles are capable of achieving extremely high pressures. Brinkmann high pressure ...
Brinkmann Pumpen
Flow: 91 l/min - 194 l/min
Pressure: 10 bar - 120 bar
Power: 2.2 kW - 45 kW
Screw spindle pumps with their silicon carbide spindle housing and highly wear resistant spindles are capable of achieving extremely high pressures. Brinkmann high pressure ...
Brinkmann Pumpen
Flow: 1.73 l/min - 11.75 l/min
Pressure: 0 bar - 280 bar
Fluid temperature: max 85.0 °C
... to its design, the Kracht KP 0 external gear pump belongs to the type of so-called gland type pumps. The essential functional elements, gearing and bearing glands are located in an aluminium housing of ...
KRACHT GmbH
Flow: 2.4 l/min - 31.6 l/min
Pressure: 0 bar - 300 bar
Fluid temperature: max 100.0 °C
... serve for the pressure field sealing to compensate the axial clearance. If required the pumps can be supplied with a Pressure Relief Valve-Type DBD... – directly attached to the pump ...
KRACHT GmbH
Flow: 16.9 l/min - 175.8 l/min
Pressure: 0 bar - 300 bar
Fluid temperature: max 150.0 °C
... for the pumps, or for complete systems and machines. The function of the axial play compensation that is essential for high pressure pumps is carried out by the ...
KRACHT GmbH
Flow: 0 l/h - 23 l/h
Pressure: 8, 5 bar
... suitable for lower flow dosing applications for abrasive slurry, corrosive fluids or those of high viscosity Dura 5 peristaltic pump for high pressure ...
Verder Liquids
Flow: 0 l/h - 39 l/h
Pressure: 5, 8 bar
... suitable for lower flow dosing applications for abrasive slurry, corrosive fluids or those of high viscosity Dura 7 peristaltic pump for dosing and low flow applications Verderflex ...
Verder Liquids
Flow: 0 m³/h - 12 m³/h
Pressure: 0 bar - 16 bar
... suitable for lower flow dosing applications for abrasive slurry, corrosive fluids or those of high viscosity Dura 45 peristaltic pump for dosing and low flow applications Verderflex ...
Verder Liquids
Flow: 0.0002 l/min - 0.26 l/min
Weight: 1,440 kg
High pressure transmission, quick tube change High-pressure peristaltic pump driven by stepper motor and quick tube change.
Flow: 7.6 l/min
Pressure: 420 MPa
Power: 100 ch
1 PUMP DRIVE 5 CUTTER HEADS INTENSIFIE PUMPS CAN OPERATE A LOW TEMPERATURES IN HIGH-TEMPERATURE ENVIRONMENTS 10 YEARS, TECHNICAL BREAKTHROUGH Motor Rating：75kW/100HP Pressure ...
Flow: 3.8 l/min
Pressure: 3,500 bar
Power: 40, 30 ch
40HP pump/420MPA pressure Motor Rating：30kW/40HP Pressure Range (Deadhead) ：60,000psi Flow Rate at Max. Pressure：3.8L/min Attenuator Volume：1L Length：66.93in Width：43.31in Height：55.12in
Flow: 3.8 l/min
Pressure: 60,000 psi
Power: 30 kW
60,000psi operating pressure A low-cost, high-efficiency new choice Motor Rating：30kW/40HP Pressure Range (Deadhead) ：60,000psi Flow Rate at Max. Pressure：3.8L/min Attenuator ...
Flow: 3,000 l/min - 4,000 l/min
Head: 27.5 m - 58.8 m
Power: 11 kW - 37 kW
Centrifugal, monoblock and single-impeller electrical pumps with pump body, with connection to the motor by means of a support unit. With flanged inlet and delivery openings (PN 10 ) and threaded counter-flanges. ...
Flow: 0.006 l/min
Pressure: 8 bar
Power: 150 kW
High Pressure Magnetic Drive Gear Pump TMG317XK/DC24DM Motor:BLDC Motor Max flow:6L/min Max Pressure:8bar Application:EV Fast Charging,Servers & Data Center Cooling,Medical Normal ...
Flow: 0 l/min - 4.5 l/min
Pressure: 70 Pa - 120,000 Pa
Input diameter: 2.6 mm
Brushless Micro Diaphragm Vacuum Pump / Air Pump TM30A-C Features: 1.Highest Performance/Size Ratio Innovative and efficent engineering designs enable the TM30A ...
Flow: 35 l/min
Head: 21 m
Power: 86.5 kW
... management liquid cooling system Server cooling / CDU cooling Fuel cell system http://www.topsflo.com/special-pumps/high-pressure-water-cooling-pump.html
The KDS 410 is an innovative pump which gives increased linear force for demanding operations. Its high pressure performance gives more than double the linear force provided by the KDS ...
Pressure: 0 bar - 150 bar
... volumetric pumps GP are high precision dispensing pumps, in fact, thanks to the extreme precision of the internal components, it is possible to guarantee accuracy and ...
Pressure: 0 bar - 150 bar
... volumetric pumps GP are high precision dispensing pumps, in fact, thanks to the extreme precision of the internal components, it is possible to guarantee accuracy and ...
Pressure: 0 bar - 150 bar
... volumetric pumps GP are high precision dispensing pumps, in fact, thanks to the extreme precision of the internal components, it is possible to guarantee accuracy and ...
Flow: 0.26 l/min - 8.5 l/min
Pressure: 50 bar - 700 bar
Length: 526 mm
The UPMD725 RC pump is a double-acting air-hydraulic pump with double pneumatic motor, pneumatic RC drive and 4/3 lever distributor hand valve Equipped with a pressure ...
Flow: 366.5 m³/h
Pressure: 1,100 bar
Fluid temperature: -40 °C - 200 °C
... RDP range is a series of Reciprocating Plunger Pumps in a variety of sizes in Triplex and Quintuplex formats and designed in accordance with the latest edition of API 674 and ISO 13710 for high pressure ...
RUHRPUMPEN
Flow: 50 m³/h - 3,000 m³/h
Pressure: 420 bar
Head: 200 m - 3,000 m
The SM pump model is a heavy-duty, horizontal, axial split casing, volute type, multi stage, centrifugal pump according to the API 610 latest edition (BB3 type). Designed to be robust and reliable with ...
RUHRPUMPEN
Flow: 900 m³/h
Pressure: 416 bar
Head: 4,000 m
... demanding high-pressure and high-temperature applications across industries. Overview Ruhrpumpen's GP pump has been engineered to be the most reliable and efficient ...
RUHRPUMPEN
Flow: 14 l/min
Pressure: 7, 161 bar
Fluid temperature: 90 °C
High-Pressure air-operated hydro cleaner. Stainless steel high pressure wash pumps for use with pure water, solvent, degreasers or washing solutions. ...
LARIUS SRL
Flow: 12 l/min
Pressure: 70, 7 bar
Fluid temperature: 90 °C
High-Pressure air-operated hydro cleaner. Stainless steel high pressure wash pumps for use with pure water, solvent, degreasers or washing solutions. ...
LARIUS SRL
Flow: 32 l/min
Pressure: 70, 7 bar
Fluid temperature: 90 °C
High-Pressure air-operated hydro cleaner. Stainless steel high pressure wash pumps for use with pure water, solvent, degreasers or washing solutions. ...
LARIUS SRL
Flow: 0.7, 1.1, 14, 1.6, 2.41 l/min
Pressure: 1,750, 2,800, 805, 1,260, 140 bar
High Pressure hydropneumatic pumps have to make effort tests on components for high pressure. For having a pumping system able to make ...
Flow: 0.0015 l/min - 0.009 l/min
Pressure: 0 bar - 30 bar
Power: 44 W
... inks and paints as well as other high viscosity liquids. Advantages ■ High dosage precision ■ precision CV < 1 % at low volumes ■ High differential ...
HNP Mikrosysteme GmbH
Flow: 0.003 l/min - 0.018 l/min
Pressure: 0 bar - 30 bar
Power: 44 W
... adhesives, inks and paints as well as other high viscosity liquids. Advantages High dosage precision precision CV < 1 % at low volumes High ...
HNP Mikrosysteme GmbH
Flow: 0.012 l/min - 0.072 l/min
Pressure: 0 bar - 50 bar
Power: 44 W
... adhesives, inks and paints as well as other high viscosity liquids. Advantages High dosage precision precision CV < 1 % at low volumes High ...
HNP Mikrosysteme GmbH
Flow: 0.7 l/h - 1,128 l/h
Pressure: 4 bar - 370 bar
Power: 0.19 kW - 0.75 kW
... smooth and safe operation. The TEKDOS series are heavy duty pumps for continuous operation in extreme temperature conditions, high pressure, high viscosity ...
Flow: 0.1 l/min - 3.2 l/min
Pressure: 0 bar - 250 bar
Precision metering high pressure gear pump. Made in stainless steel. For products with medium to high viscosity. Suited for resins, glues, greases, ...
Please specify:
Help us improve:
remaining