- Detection - Measurement >
- Flow, Pressure and Level Measurements >
- High-temperature flow meter
High-temperature flow meters
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
{{#each product.specData:i}}
{{name}}: {{value}}
{{#i!=(product.specData.length-1)}}
{{/end}}
{{/each}}
{{{product.idpText}}}
Process temperature: 0 °C - 232 °C
... . It can operate at high temperatures up to +230 °C (+450 °F). The flow meters increases efficiency of finalized products and can provide high amount ...
Process temperature: 140 °C
... applications in the food sector. The high-end flowmeter is particularly suitable for blending, dosing or filling applications where a high accuracy (±0.2% of measured value) is priority ...
KROHNE Messtechnik GmbH
Process temperature: -200 °C - 400 °C
Process pressure: 200 bar
... 100%. In this way, the Coriolis device enables continuous and uninterrupted measurement of mass and volume flow, density and temperature – even at difficult process conditions with 2-phase ...
KROHNE Messtechnik GmbH
Process temperature: -200 °C - 250 °C
Process pressure: 6 bar - 100 bar
... on the transit time method, the 3 parallel acoustic paths of the flowmeter allow bi-directional measurement independent of flow profile for high accuracy even under less favourable flow ...
KROHNE Messtechnik GmbH
Process temperature: -15 °C - 80 °C
Precision: 0.25 %
Repeatibility: 0.1 %
... portable area velocity meter that measures flow using a submersible ultrasonic sensor. The unit is designed for flow surveys in open channels, partially-full sewer pipes, and surcharged ...
Process temperature: -40 °C - 140 °C
Process pressure: 0 bar - 5 bar
Precision: 0.5 %
The OPTIFLUX 6000 is an electromagnetic flowmeter (EMF) for hygienic applications in the food sector. The 3A and EHEDG certified flowmeter has industry-specific insertion lengths to meet the stringent ...
Volumetric flow rate: 0 m³/h - 33,629 m³/h
Process temperature: -200 °C - 350 °C
... U-shaped dual sensors maximize accuracy Flow rate turndown up to 200:1 Suitable for liquids and gases Sensor sizes from <1mm through 10” Ability to measure rates from 0-0.032 GPH to 0-423,000 BPD Flow ...
As a result of extending the range of functional applications of the MultiCon product line, the CMC-N16 wall mounted model has been designed. The new IP 65 enclosure allows using the device in harsh environments, where safe installation ...
Process temperature: -55 °C - 75 °C
Process pressure: 1 bar - 187 bar
... gas flow meter that offers a rugged transducer, weatherproofing, and is approved for use in hazardous environments. The XGM868i is accurate over a wide range of flows and compositions ...
Process temperature: -40 °C - 400 °C
Process pressure: 0 bar - 175 bar
... vortex flow meter that saves you time and costs by measuring flow, temperature, pressure, density, energy and mass in a single meter, with no need to ...
Process temperature: 0 °C - 150 °C
Process pressure: 0 psi - 90 psi
Precision: 1, 0.35 %
Improve high temperature flow control accuracy and efficiency. Engineered for the challenging conditions associated with high temperature ...
Volumetric flow rate: 0 l/h - 100 l/h
Process temperature: -50 °C - 204 °C
Process pressure: 0 bar - 276 bar
... tube flow meters. Certified explosion proof, our low flow liquid flow meters also offer optional transmitters or inductive alarms for more advanced flow ...
Volumetric flow rate: 1 l/h - 100,000 l/h
Process temperature: -198 °C - 420 °C
Process pressure: 6,000 psi - 20,000 psi
Widest temperature, pressure and process range. One proven flow meter. Engineered to work where you need it: Choose the MT3809 variable area (VA) max flow meter ...
Process temperature: 0 °C - 120 °C
Process pressure: 10 bar
... maintenance free measurement of high mass flow rates of dry bulk solids independent of pipe run Electromagnetic flowmeter, designed to measure bulk material flows ...
Volumetric flow rate: 0.5 l/h - 130,000 l/h
Process temperature: 0 °C - 350 °C
Process pressure: 0 bar - 16 bar
The fluid flows from bottom to top through the meter tube of the flowmeter. The float is lifted until an annular gap between the meter ring and the cone-shaped float is produced which ...
Volumetric flow rate: 3 l/min - 280 l/min
Process temperature: -60 °C - 180 °C
Process pressure: 20 bar
The HM-P series of turbine flow meters is a reliable and versatile solution for measuring continuous and discontinuous flows. These instruments are ideal for a wide range ...
Volumetric flow rate: 2.5 m³/h - 650 m³/h
Process temperature: -10 °C - 60 °C
Process pressure: 6 bar
... for easy integration with existing systems. With its ability to operate at temperatures up to 60°C, the device can provide reliable measurements even in high-temperature environments. ...
Volumetric flow rate: 3 m³/h - 650 m³/h
Process temperature: -10 °C - 60 °C
Process pressure: 6 bar
... connection enables easy integration with existing systems. The device can operate at temperatures up to 60°C, ensuring reliable measurement even in high-temperature environments. The ...
Volumetric flow rate: 15 m³/h - 100 m³/h
Process temperature: -20 °C - 200 °C
Process pressure: 1.6 bar - 6.3 bar
Oval gear flowmeter is a volumetric meter for continuos or intermittent measurement and control of liquid flow in a pipeline. It has many advantages, such as large range, ...
Volumetric flow rate: 34 m³/h - 190 m³/h
Process temperature: -20 °C - 200 °C
Process pressure: 1.6 bar - 6.3 bar
Oval gear flowmeter is a volumetric meter for continuos or intermittent measurement and control of liquid flow in a pipeline. It has many advantages, such as large range, ...
Mass flow rate: 2.2 kg/h - 243,954.2 kg/h
Volumetric flow rate: 1.2 m³/h - 30,000 m³/h
Process temperature: -40 °C - 450 °C
Vortex flowmeters are considered for high temperature and also can be used for all fluids up to a maximum temperature of 450°C. The immersion model can even be connected ...
Vortex flow meters are the ideal choice for steam measurements due to their robust design, no moving parts, and high- temperature/pressure resistance. S435 measures mass ...
Volumetric flow rate: 0 l/min - 525 l/min
Process temperature: -40 °C - 210 °C
Process pressure: 0 bar - 450 bar
... Process technology Automobile industry Plastics technology Advantages of the VS gear flow meters Maximum precision and linearity Short response times Large range ...
VSE Volumentechnik GmbH
Volumetric flow rate: 0 l/min - 3,000 l/min
Process temperature: -40 °C - 210 °C
Process pressure: 0 bar - 450 bar
... can also be used in extreme temperature zones. Applications Process technology Hydraulics High viscosity, paste-like, abrasive adhesive and sealing substances Advantages of the VSE helical screw ...
VSE Volumentechnik GmbH
Volumetric flow rate: 0.1 l/min - 150 l/min
Process temperature: 0 °C - 80 °C
Process pressure: 0 bar - 200 bar
... volumetric flow. The pulse evaluation is carried out using VSE evaluation electronics or any other evaluation device. The flow meters are ideal for low pressure hydraulics, lubrication ...
VSE Volumentechnik GmbH
Process temperature: -20 °C - 150 °C
Process pressure: 10 bar - 200 bar
Precision: 0.1 %
The IFR 6000-40000 (Injection Flow and Rate) flowmeter is dedicated to instantaneous flow measurement of large and very large injection volumes and injection ...
Volumetric flow rate: 0.3 m³/h - 71 m³/h
Process temperature: -15 °C - 100 °C
Process pressure: 0 bar - 10 bar
EPR Paddle Wheel Flow Meter mainly by using the principle of rotating blades to measure flow. Mainly by the middle of the leaf blade and the leaf blade capacity calculated. In the structural ...
Process temperature: -40 °C - 150 °C
Process pressure: 0 bar - 16 bar
Precision: 2 %
... with this 4-in-1 sensor: measure (bi-directional) flow, pressure, temperature, and total flow simultaneously. The patented VPFlowScope® DP is the ultimate measurement tool for saturated ...
Process temperature: -190 °C - 650 °C
Precision: 1.6, 1.2, 0.5 %
... non-invasive flow meter includes the entire measuring system -the measuring transmitters and transducers. It also includes the patented WaveInjector mounting fixture for extreme temperatures, ...
FLEXIM Flexible Industriemesstechnik GmbH
Process temperature: 212 °F - 1,166 °F
Process pressure: 14.5 psi - 3,176 psi
Precision: 3 %
... is our smart solution for high-temperature steam flow measurement in hazardous areas. Non-invasive and efficient FLUXUS G831 ST-HT measures steam flow non-invasively ...
FLEXIM Flexible Industriemesstechnik GmbH
Process temperature: 212 °C - 1,166 °C
Process pressure: 0 psi - 1,580 psi
Precision: 3 %
... proud to present, FLUXUS ST-HT, the latest high-temperature model in our growing family of unique non-invasive steam flow metering products. The FLUXUS ST-HT is complementary to our existing ...
FLEXIM Flexible Industriemesstechnik GmbH
Process temperature: -10 °C - 80 °C
Precision: 1 %
... Main Features •Precise bi-directional and highly dynamic flow measurement with the non-Intrusive clamp-on technology. •High precision at fast and slow flow ...
Mass flow rate: 0.15 kg/min - 20 kg/min
Process temperature: -196 °C - 400 °C
Process pressure: 0 bar - 1,043 bar
... request The RHM06 is a low risk, low maintenance solution for critical flow applications everywhere. High pressure and temperature options comined with a selection ...
Mass flow rate: 5 kg/min - 750 kg/min
Process temperature: -196 °C - 400 °C
Process pressure: 0 bar - 798 bar
... Tantalum more on request The RHM30 is available with a wide choice of material options to suit benign and aggresive applications. Heavy duty variants meet high pressure ...
Mass flow rate: 130 kg/min - 8,000 kg/min
Process temperature: -196 °C - 350 °C
Process pressure: 0 bar - 341 bar
... request The RHM80 excels in tough applications where high temperatures, pressures and corrosive fluids are present. Its heavy duty construction withstands extreme applications without ...
Volumetric flow rate: 0 l/min - 3,000 l/min
Process temperature: -40 °C - 200 °C
Process pressure: 0 bar - 450 bar
Volumetric flow rate: 0 l/min - 70 l/min
Process temperature: -40 °C - 180 °C
Process pressure: 1,035 bar
Gear Flow Meters for High Pressure Applications with Autoclave connections Thanks to their robust design, gearwheel flowmeters are particularly well ...
Process temperature: -10 °C - 120 °C
Process pressure: 0.6 MPa - 4 MPa
Precision: 0.5 %
SUP-LDG Electromagnetic meters are a leading choice to deliver the performance and precision your applications require. These meters are applicable for all conductive liquids, such as ...
Supmea Automation
Process temperature: -40 °C - 160 °C
Precision: 1, 1.5, 0.5 %
Repeatibility: 0.2 %
... liquid processes. This user friendly microprocessor based, field programmable flowmeter ensures that the flow of existing processes can be performed without interrupting the flow and ...
ALIA GROUP INC
Your suggestions for improvement:
Receive updates on this section every two weeks.
Please refer to our Privacy Policy for details on how DirectIndustry processes your personal data.
- Brand list
- Manufacturer account
- Buyer account
- Our services
- Newsletter subscription
- About VirtualExpo Group
Please specify:
Help us improve:
remaining