|
|
|
|
|
|
DICTATOR furnishes a large range of doorclosers and related products. It offers also solutions for a lot of special and demanding applications.
Special door closer solutions
DICTATOR provides two special doorclosers especially for gates in fencings of industry plants, kindergardes, play grounds etc. The RTS tube doorcloser is virtually invisible due to the fact that it is built into the door or the gate. The DIRECT doorcloser is installed on the door / gate.
Floor springs: the DICTATOR WAB floor spring is the ideal solution for large, heavy and highly frequented hinged doors up to 600 kg. The fact that the complete interior is filled with oil assures a troublefree damping and closing and a extremely long life.
Back check
The DICTATOR back check with hydraulic damping for hinged doors, slows down the opening movement of the door before it reaches the open position and limits the opening angle of the door. It prevents damage to the door by providing a cushioning effectat the required angle and reduces the danger of injuries and accidents to persons. The back checks are available with and without adjustment.
Closing springs
DICTATOR closing springs can be either built into the doors or installed on the door, recommended to be used n combination with a DICTATOR door damper.
Swing door hinges: the Hawgood swing door hinges are available for different door thickness. Their special feature: due to their construction they swing the door leaf out of the passage thus leaving the largest possible passage way.
|
|
| ... products without technical information |
| |
SLIM-IN Line
Door/Wall mounting System description
Specifically developed for door or wall mounting, the air conditioners of the series SLIM-IN cover a cooling capacity range from 850W to 2500W.
They are available in 230V (and some items in 400V).
Common to most of the SLIM-IN models is the Maintenance Free concept.
All models are equipped with an electronic board (not for EVE08).
::Reciprocating hermetic compressor with thermal amperometric protection ::Ecological R134a refrigerant, CFC free ::Condensing and evaporating heat exchange coils in copper pipe with aluminium fins ::Internal and external fans on ball bearings with internal thermal protection ::Electronic board EBB (For EVE08 Internal mechanical thermostat set at 35°C, dead band 4°C) ::Power supply wire 3m long ::Steel sheet front cover powder painted RAL 7032 orange peel ::Zync plated frame
Optionals
::Stainless steel frame and front cover ::Not standard colour (RAL) ::Electronic board EBB (not available for EVE03)
|
|
|
|
|
|
The thermal management program is a computer-aided calculation system for switch cabinet air-conditioning.
It takes care of all the worries associated with production standstill caused by overheated switchgear systems.
The program contains databases of the Eldon enclosures, their dimensions, the conditioning devices (filter/fans, cooling units, heat-exchangers) and a selection of the most used electrical components with their heat dissipation. Additional databases can be created within the program.
After having chosen the enclosure type and size, given all the environment conditions (enclosure situation, required equipment temperature, ambient temperature and heat dissipation), the program will propose the most appropriate conditioning solution. A calculation report can then be printed.
To allow the installation study of the cooling devices on the enclosures in the early stage of a project, dimensional drawings of all the devices will be provided in CAD system DXF and AutoCAD file formats soon. You can find the different dimensions in our datasheets.
|
|
Air condensation can operate at temperatures up to 71 °C.
Air condensation technology can be used to air condition a cabinet when there is no industrial water supply.
Apex Technologies is the first to market a range of very high temperature air condensation air conditioners, specifically suited to extremely difficult industrial environments (foundries, forges, iron and stell market, thermal treatement, ovens, cranes...)
This technology is fully compatible with the features of other vertical air condensation air conditioners in our range: cutout, wiring, components, operation without air filters thanks to very wide blades, separation of air flow...
|
|
All APEX air-conditioning units are HOMOLOGOUS for the motor industry and are recognised as being among the best performing, above all in harsh environment, such as workshops, factories, forges, foundries, blacksmith's and paint shops.
APEX condensers are specially designed and installed to operate WITHOUT FILTERING ambiant air. Their surfaces and installation are one of the key points in the overall performance of the entire APEX range.
We have developed a specific range of air-conditioning units for outdoor and marine applications. They are portable and/or suitable for operating in all weathers.
|
|
+ filterless maintenance-free
+ cooling performances 600...2000 W (L35/L35)
+ space-saving ex./internal mounting
+ flat design-sheet steel housings
+ customer specific painting
+ stainless steel models
+ Microprocessor controls
+ R134a refrigerant
|
|
Mini size Maxi cooling for small enclosures
+ filterless maintenance-free
+ cooling performance 200...500 W (L35/L35)
+ for external, internal & top mounting
+ flat design sheet steel housings
+ customer specific powder coat painting
+ stainless steel models
+ Micro-processor controls
+ R134a refrigerant
|
|
| ... products without technical information |
| |
|
|
|
|
This is an air curtain designed for use in industrial areas and to curtain more exacting areas. It can be mounted horizontally or vertically. The design and output of the curtain was adapted to the usage in question. All this is reflected in long lifespan and reliability of the device, which thanks to this fact is maintenance-free and easy to operate. The air curtain is particularly used to curtain large openings such as doorways in production and storage halls, hangars, garages, machine plants and transport depots etc.
SPECIFICATION
- Individual modules are manufactured in lengths of 0.55 m, 1.5 m and 2 m
- Range of use for doors at a height/width of up to 7 m with an air volume
of up to 10 200 m3/h
- Can be installed vertically or horizontally with easy connection of
individual modules
- Electric heater up to 18 kW, water heater (2 output versions) up to
36 kW, or air only version
- 5-level fan speed with the possibility to use external switches
- Control of several units at once using one control panel
- Possibility to supply sophisticated solution for regulation of water heating
|
|
|
|
|
|
TMI, LLC (Trading & Manufacturing Industries) headquartered in Pittsburgh, Pennsylvania has air curtains for any need; temperature control, insect control, environmental controls. TMI has the right air curtain for the job.
Commercial door units are designed to be aesthetically pleasing, quiet, and efficient. Light Industrial units are best suited for applications inside a plant or warehouse. These popular units are ideal for controlling unwanted airborne contaminates, such as dust or fumes. Medium Industrial are the most widely used of all industrial air door units. These air door units have the same size cabinet as our light industrial units, but have more powerful motors and fans for increased performance. Medium industrial air doors are often used on loading dock doors to control heating and air conditioning loss. Heavy Duty and Extra Heavy Duty air curtains are for the larger industrial doors.
All Save-T Air Doors/Air Curtains are easy to install, quiet, and efficient. Most doors can be ordered with either electric or hot water/steam heaters. Heaters are mounted to the intake side of the air door unit and can raise the temperature of the exiting air stream by as much as 30°F. Indirect Gas fired heaters are recommended for larger industrial doors.
|
|
| ... products without technical information |
| |
CABINETS SERIES F AA 1300 (1023x400x2000 mm h)
- Technical features
- Layout examples for cabinets series F AA 1300 (polycarbonate doors)
- Layout examples for cabinets series F AA 1300 (perforated doors)
- Empty cabinets series F AA 1300 (perforated and polycarbonate doors)
- Container hooking rails
- Adjustable shelf - perforated back panel
- Spare doors - spare parts for cabinets
- Distances between shelves
|
|
NC cabinets protect your NC tools and fixtures against dirt and damage and make way for a good overview, orderliness, and free space.
The cabinet housing can be fitted individually using tool cradles, pull-out shelves and adjustable shelves and provide access to NC tools in an optimal fashion. Sliding doors, hinged doors, and plastic roller shutters protect the tools against unauthorised removal and help to keep your tools available and ready for use at all times.
|
|
| ... products without technical information |
| |
|
|
|
|
DOUBLE-DOOR, PASS-THROUGH LABORATORY AUTOCLAVES – CIRCULAR SECTION (380/415V, 10.5kW)
Where a clean room or containment suite is being installed it is often an advantage to install a through-wall autoclave to ensure containment. Priorclave manufacture Pass-through autoclaves with circular chambers in 150L and 200L capacities. Double Door Priorclaves have interlocks to prevent both doors being open at the same time as this would breach the integrity of the site. They also have an interlock to prevent the door at the unloading end from being opened until the sterilisation cycle has been successfully completed and the load is safe to pass into the unloading end.
Pass-through Priorclaves include all the features of the Front Loading Range.
Priorclave are pleased to offer our uniquely comprehensive design and advisory service to help you to correctly specify and design and autoclave to suit your particular requirements.
Each site is different with the requirement for doors to be hinged to swing in different directions and with the location of the required services. Final manufacture therefore requires full details of the proposed location and operation routines. This can be achieved by a site survey by one of our representatives or by the supply of detailed drawings.
|
|
|
|
|
|
RECTANGULAR SECTION VERTICAL POWER DOOR PRIORCLAVE LABORATORY AUTOCLAVES
Perfect for high volume throughput as well as large bulky items, these autoclaves combine a huge internal capacity with a small floor area.
The Priorclave Hydraulic Power Door mechanism enables the door to be opened and closed at the touch of a button.
A fixed door seal is used for reliable, trouble free operation.
- 230, 285, 350, 450 & 700 litre capacities (Intermediate and larger capacities also available)
- 3 Year Guarantee on door seal
- Powerful heaters for shortened cycle times
- 21, 31.5 or 42kW (380/415V) electric or direct steam heating
- Steam Jacketed versions available (steam heated models only)
- Fully settable up to 138oC–2.4 Bar. 1-999 minutes
- TACTROL microprocessor control system with optional 5 or 10 program memory
- BioCote anti-microbial surface coating – unique to Priorclave
- Two non-tipping shelves
- 12 months parts and labour warranty (parts only outside UK)
- 10 year or 10,000 cycle pressure vessel warranty
- Thermal interlock for safety with liquids in glass containers
- Pressure interlock
- Media Warming & Delayed Start
- Fan cooling
- Timed Freesteaming
- Thermocouple port and test port
- Stainless steel baskets, waste containers and loading trolleys available
- Full range of options and accessories
- Vacuum models available (liquid ring vacuum pump)
|
|
|
|
|
|
DOUBLE-DOOR, PASS-THROUGH LABORATORY AUTOCLAVES – RECTANGULAR SECTION (380/415V, 21, 31.5 or 42kW)
Where a clean room or containment suite is being installed it is often an advantage to install a through-wall autoclave to ensure containment. Priorclave manufacture Pass-through autoclaves with rectangular section chambers in 400 to 100 litre capacities. Double Door Priorclaves have interlocks to prevent both doors being open at the same time as this would breach the integrity of the site. They also have an interlock to prevent the door at the unloading end from being opened until the sterilisation cycle has been successfully completed and the load is safe to pass into the unloading end.
Pass-through Priorclaves include all the features of the Rectangular Section Range.
Priorclave are pleased to offer our uniquely comprehensive design and advisory service to help you to correctly specify and design and autoclave to suit your particular requirements.
Each site is different with the requirement for doors to be hinged to swing in different directions and with the location of the required services. Final manufacture therefore requires full details of the proposed location and operation routines. This can be achieved by a site survey by one of our representatives or by the supply of detailed drawings.
|
|
The Sesam 800 has various usage areas like remote control of doors, gates, barriers, fans, floodlights, and more. The system
can also be used for winches and other non-safety relevant automotive applications. It is robust, flexible, straightforward, and uses modern digital technology.
Sesam 800
• Flexible, simple and robust
• Several transmitters and receivers
• Utilizes the 869 MHz (or 926.5) frequency band
• Feedback function indicates active relay
• Based on 16,7 million unique codes
• Protection class IP65
• Checksums ensure error-free message transmission
• Encrypted authentication for extra high security
• Receiver with LCD character display and detachable memory card as an option
• Big range of carrying devices
|
|
|
If security and convenience are two of the major attributes your customers demand for the electronics in their vehicle doors. TriMark has the answer. Full functionality and state-of-the-art design and manufacturing means you can depend on TriMark electronics to be working many years down the road.
|
|
Doorholder magnets, explosion proof
Doorholder magnets with 650 N, 1300 N and 2000 N force, explosionproof, in acc. with ATEX 94/9/EC, II2G EEx m II T6, II2D IP66 T85, for use in hazardous areas zone 1, 2, 21 and 22 for all kind of gas, mixtures, vapours and dust (in acc. to type). Protection class IP65.
|
|
|
|
|
|
DICTATOR provides complete hold open systems for hazardous areas
They comprise explosion-proof smoke and heat detectors, door operators and the electromagnets. They comply with the requirements for group II products and can be installed in all zone 1 and 2 areas (according to VDE 0165). The explosion proof magnets are encapsulated (EEX m). Two series are available: with ex-proof connection box or with connection cable. The standard length of the cable is 2 m, but it can be delivered in the length required on site. The holding force of the magnets is either 550 N or 145N. The integrated release pin eliminates any remanence after switching off the power supply of the magnets, ensuring that the magnets always releases the door. All ex-proof magnets are equipped with diodes and polarity protection.
The DICTATOR ex-proof magnets have been tested both according to EN 1155:2005 for hold-open systems and the ATEX directive by the Physikalisch-Technische Bundesanstalt Braunschweig (certificates PTB 03 ATEX 2174 X and PTB 03 ATEX N060).
In addition to the ex-proof magnets DICTATOR also provides a large range of electromagnets for hold-open systems, that comply with the EN 1155:2005 and are approved for the use in hold-open systems.
|
|
The structure consists of a machine bed with a beam that slides across the top of it. Both parts are made of steel and are duly stabilised after each work phase to ensure that there is no interior tension; they are of sufficient size to guarantee stability and precision during machining operations.
|
|
Designer and manufacturer of digital control machining centres for over 20 years, dubus has gathered in door machining a knowledge which makes it a market leader in this industry. FLEXDOOR 6000 machining centres make it possible to machine large daily amounts, even if manufacturing batches are reduced and customised. They allow machining or installing hardware on flat or joined doors, with a single machine or a line of several specialised machines The FLEXDOOR 6000 digital piloting enables high flexibility to be reached while maintaining a very high productivity. These machines also allow installing on line any pins, hinges or locks.
The FLEXDOOR 6000 can be connected to your CAM using a dubus software enabling file recovery and machining programmes automatic generation.
|
|
Grey cast iron flange wheels
LINE GSPG GSPK
Wheel: made of special grey cast iron, flange and running surface stripped dean. Running surface with 3° gradient, with plain bearing or groove ball bearing. Low rolling resistance, high abrasion resistance. The wheels with plain bearings are temperature resistant up to 600°C
|
|
|
|
see the results for the following category : 
