|
|
HADEF Ratchet Lever Hoist Type 53/07
Long product lifetime, minimum maintenance necessary by precise fitting of hoist components
Reinforced hook safety catch
For lifting, pulling and fastening
Non-skid hand wheel
Encapsulated, automatic load pressure brake
|
|
Tugit Series 653 Lever hoist
Capacities 3/4 to 6 Ton
- Impact resistant, stamped steel frame, gear case & cover
- Light weight design
- Double-pawl arrangement for assured load control
- Weston-type braking system
- Shipyard hook option available
Tugit Series 602 & 603
Capacities 550 to 1100 lbs.
- Small compact design. Use in confined conditions
- Weston-type load brake
- Impact resistant, all steel frame
- Free wheeling feature
- Metric rated
|
|
Low headroom version
• designed specially for low ceilings
• block adapted to the load
|
|
|
|
|
|
Manual Chain and Lever Hoists up to 20 ton
For nearly 50 years, Ingersoll Rand has been serving the material handling needs of the following industries worldwide: automotive, appliance, aerospace, electronics, food, furniture, glass packaging, printing, pharmaceutical, sheet metal, textile, and warehousing.
The many years of manufacturing experience, ISO 9001 certification, and a 24 hour service network has created a unique ability to respond to your needs with the highest quality material handling solutions, technology, and services available in the world.
Ingersoll Rand has pioneered the development of pneumatic powered lifting, balancing, and handling equipment making us the world leader in the manufacturing of ergonomic, in process, manual assist, pick and place solutions.
With a solid commitment to research and development we have applied our expertise to introduce new products and technology which can also integrate the latest electronics and controls, such as the InteLIFT system: an electronically controlled, air powered intelligent handling solution.
By using Ingersoll Rand solutions created for your material handling needs, you can expect improved productivity mandated by a global economy. At the same time, you can expect ergonomic solutions which improve operator performance and avoid labor downtime due to health or safety issues in using automation.
|
|
|
The HCH hand chain hoist model is designed using the latest technology and manufactured with quality materials. This chain hoist is compact with low headroom and light weight for easy installation. This hand chain hoist is made with heat treated reduction gears, top hook pivots and swivels for easy rigging. Sealed, pre-lubricated ball bearings provide long service life with low maintenance. This hand chain hoist can be suspended either by push trolley or geared trolley, or simply by its top hook. Hand chain hoists provide a convenient means for hoisting heavy objects. When a chain hoist is used, the load can remain stationary without requiring attention. The slow lifting travel of a chain hoist is also advantageous in that it permits small movements, accurate adjustments of height, and cautious handling of loads. All capacity ratings are metric (1 ton = 2,200 lbs).
|
|
Bravo
Range of lever hoists lightweight, compact, powerful and easy to operate. Quality products guaranteed by the TRACTEL Group, the range of BRAVO lever hoists is manufactured from high quality materials giving a strong and robust unit for operating even in the most difficult conditions.
Tralift manual chain hoist
lightweight chain hoists Tralift chain hoists are lightweight and compact portable lifting machines for a wide variety of applications
|
|
HADEF Manual Chain Hoists manual chain hoists without trolley
- compact steel housing
- two pawls ensure high safety factor
- zinc plated high quality RUD load chain acc. to EN 818-7-T
- zinc plated hand chain acc. to DIN 766
- German Certificate of Origin
HADEF Manual Chain Hoists
manual chain hoists without trolley
8/98 - Stirnradflaschenzug - economy line
|
|
Manual hand chain blocks offer safety with reduced weight for easy manual usage. Designed with a safety coefficient of 5, this manual hand chain block built by Konecranes is a competitive, quality product.
- From 250 kg up to 3000 kg
- Safety factor 5
- Reduced weight: 4 kg for 250 kg chain hoist
- Minimum maintenance
- Sold with a 12 month guarantee
- Lifting chain conforms to the NFE 26011 standard supplied in anti-corrosion version
- Heavy duty powder paint
|
|
USA Hand Chain Hoists
Series USA Hand Chain Capacities 1/4 to 6 tons
- Standard lift 8' (other lifts available)
- Portable - light weight housing
- Overload device - standard
- One-piece steel load sprocket and sprocket gear
- Hook latches on all models
- Spark & corrosion resistant models
- A real "made in america" competitor
|
|
This endurable "colleague" makes your purchasing decision easy:
Using our SILVERLINE hand chain block the lifting and lowering of loads is achieved by pulling the hand chain %u2013 whilst the load pressure holds the load securely. As standard our SILVERLINE lifts loads from 500 kg up to 10000 kg and offers the option of larger lifting heights (standard 3 m) and the mounting of a chain container.
|
|
Synchronized hoist low headroom 2 falls
• for absolutely synchronised raising and lowering
• for long and bulky loads
• assures precise positioning of the loads
Synchronized hoist normal headroom 2 falls
• specially for high rooms
• for absolutely synchronised raising and lowering
• for long and bulky loads
• assures precise positioning of the loads
Synchronized hoist 4 falls
• for absolutely synchronised raising and lowering
• for long and bulky loads
• assures precise positioning of the loads
• prevent rotating or pivoting of the load
|
|
Demag introduces Model DC, a new generation of chain hoists. Precision quality with innovative features for added safety and serviceability.
- Plug in electrical connections
- Diagnostic service data
- Integrated 3 axis motion controls
- CSA approved
- 24 volt pendant control voltage
- Cycle and load spectrum monitoring
- Upper and Lower limit switches
- Slip clutch to prevent overloads
- High safety factor for load chain
- Gearbox lubricated for 10 years
- State of the art controls
- Long life low amp switching
- Easily adjustable pendant height
- Pendant or available with remote control
|
|
AccoLift
Standard Features:
Dual Brake System :
Disc type motor brake working with a mechanical load
brake provides load lowering control. Electric brake
designed for easy access and simple adjustment.
Upper and Lower Limit Switch :
Prevents overwinding by stopping operation in the case of
overlifting or overlowering.
Overload Alert :
Installed as load detecting safety device to prevent
overload for greater hoist longevity.
Push Button Control :
Compact design to enable one-handed operation. Rated
NEMA 4 protection. Emergency stop button included.
Push button cable has strain relief to prevent cable
damage.¬«
|
|
- Hoists from 1 to 50 Tonne
Foot mounted,
Low headroom Monorail, Birail
- Overhead travelling crane kits
from 1 to 50 Tonne
Single girder, Double girder
- Crane end-carriagesfrom
1 to 50 Tonne
|
|
Hand Operated Hoists Features and Spécifications
Covers:
Impact résistant Lexan resin covers are utilized to protect the gearing and load brake. The covers are designed for protection only and do not support bearings. They can be removed easily for inspection and/or maintenance.
Load Chain:
The zinc plated load chain is close link coil type,
electric welded alloy steel and is heat treated for
wear and impact résistance. Ail links are of uniform size and shape to permit proper seating in the load sheave pockets. The dead end of the chain is securely attached to the hoist in a manner which will permit ease of replacement.
|
|
Safety is our primary concern - The new DR wire rope hoist has the standard features you need, for safe operation you can trust.
- Brake & Load Spectrum Monitor
- Wire Rope Pinch Protection
- Bottom Block Grip Handle
- Trolley Drop Stops
- Audible Warning Device
Reliability you can expect - Designed for long life and backed with a long 2 year "no catch" warranty.
The DH hoist is the Performance Standard for your high capacity lifting requirements.
- Modular design - Many configurations, speeds, rope lead off positions and reeving arrangements are possible. Base mounted and a variety of standard trolley designs are available.
- Heavy Duty - High duty, high cycle rated hoists with single, 2 speed, or VFC, lug or trolley mounted, to 100 Ton Capacity
- Many features & options - Demag DH wire rope hoists incorporate advanced electrical and mechanical engineering features and options - standard rope guides, optional "Load Halt" and overload protection.
|
|
Electric winches of lifting in conformity with the standards, regulations and texts in force defining the elevating lifting devices. For small handling in mobile workshops, on cranes and brackets, for commercial vehicles or heavy trucks.
WARN H 3000 GF: 880 daN. Available in 12 or 24 V
WARN H 500: 400 daN. Available in 12 or 24 V
WARN H 350: 245 daN. Available in 12 or 24 V
|
|
The New Century Séries® Wîrc Rope Hoists -1 to 25 Ton Capacîty
The Design Results From Years of Material Handling Engineering and Manufacturing Knowledge and Experience-Utilizing Space-Age Techniques and Materials While Retaîning the Superior Design Features and Quality of Current Hoists.
Standard Features: OVERLOAD CUTOFF
Protects load, hoist and operator by înterrupting raîsing circuit when hoist sensés a damaging overload. When lifting circuit is interrupted, the lowering circuit remains intact to allow the load to be lowered and removed. After the overload is removed the lifting circuit is automatically restored. Overload Cutoff is accessible for fïeld adjustments.
|
|
Air Hoist
These air hoist products work reliably in demanding environments such as foundries. Our air hoists feature an unlimited duty cycle, making them suitable for continuous operation. A spring-loaded multi-vane motor design permits smooth operation and controlled travel.
Variable speed operation permits fine positioning control without electronics. Our air hoist products offer:
Higher Strength Cast Iron Housing
Internal Disc Brake
Drop Stops and Rubber Bumpers
Side Guide Rollers
|
|
|
|
|
|
Lift loads safely in hazardous environments
Minimize sparking, static and electrical hazards with this air-powered hoist
- Eliminate electric motor dangers by using air motors for both hoist and trolley
- Lift with confidence in dusty and volatile environments by using spark resistant components:
_Stainless Steel wire rope
_Bronze bottom block and hook
_Copper-Beryllium or Micarta trolley wheels
_Rubber bumpers
- Operate hoist in remote locations without electrical service
Increase clearance under hoist without increasing crane height
Air hoist requires just 16" of beam-to-hook clearance (headroom)
- Raise molds and tooling further from production machinery during changeovers
- Maximize overhead clearance as products are positioned in paint and spray booths
- Extend clearance under baskets when lifting over dip tanks side walls
- Minimize motor and pump service crane heights
Raise and lower loads with precision
Variable speed operation is affordable with pneumatic controls
- Slowly lower assemblies and mold sections into place with variable speed rope controls
- Position loads from a distance and gradually start trolleys with variable speed lever pendants
- Adjust the lift speed as required without being limited to one or two preset speeds
Standard Features
- Moderate service (H3) hoist
- Accessible in-line gear train
- Mechanical load brake
- Rotary vane air motor
- Emergency upper limit switch
- Single-reeved
- Variable speed rope control on lug mounted and push trolley models
- 4-button single-speed air push-button pendant on motorized trolley units
- Lug mounted
|
|
Electric chain hoist model CPE with suspension hook or with integrated trolley
Capacity 1600-10000 kg
The standard, oil bath lubricated planetary gearbox is particularly smooth running and enables a low overall height. This robust unit for heavy duty applications with thermal overload protection (in connection with low voltage control). The units are supplied with direct control as standard.
Features
- 400 or 230 V, 3-phase, 50 Hz- Euro-voltage, resp. 460 or 230 V, 3-phase 60 Hz. VTEF version (2-speed) 400 V, 50 Hz or 460 V, 60 Hz.
- Motors protected to IP 54, insulation class F.
|
|
Electric Chain Hoist - Electric Hoist
These electric chain hoist products are designed using the latest technology, resulting in high quality, low headroom, and full-featured hoists. They provide reliable daily performance in both routine and severe workplace environments. Electric hoist products have:
Capacities from 1/8 to 5 ton
Reconnectible voltage 208-200/460-3-60 for both single and dual speed hoists.
Control voltage 110V (optional 24V and 48V)
Duty cycle: Single speed - 60 min.
Dual speed - 30/10 min.
Classification: ASME H4
ISO M5 or M4
FEM 2M or 1Am
Ratings: Hoist IP 55
Pendant IP65
|
|
The model CPS is the smallest and lightest within the family of Yale electric chain hoists. Reliability and compact design make it ideal for numerous applications in the construction industry, service companies and many industrial areas for moving small and medium loads.
Features
- Standard lift height 3 m, control cable 2 m (direct control)
- The 10-pocket load sheave ensures a smooth running of the chain and minimizes chain wear.
- Distance between hooks only 276 mm (up to 250 kg capacity)
|
|
|
|
|
|
Electric Wire Rope Hoist
Space-saving wire rope hoist products expand overhead work space.
Requiring as little as 16" of beam-to-hook clearance (headroom), these wire rope hoists create additional overhead lifting space.
Maximize usable workspace under bridge, jib and gantry cranes.
Increase load clearance over obstacles.
Position loads accurately and efficiently.
Single and two-speed lifts available from 12 to 50 feet per minute.
Carefully position molds and tooling on production equipment.
Accurately load rolls, coils and bulk bags onto processing machinery.
Quickly raise replacement pumps and motors to service platforms.
Lift loads to bench level or high overhead.
Standard lift heights from 20 to 100 feet.
Service and install hard-to-reach equipment from elevated platforms and roof tops.
Incorporate shorter lift hoists for repetitive work station lifting applications.
Raise raw materials, products and equipment from pits and access shafts.
Configure the M55 for specific applications.
Standard and custom options are available.
Equip the M55 for outdoor use and for operation in hazardous environments.
Meet critical application requirements with custom engineered solutions.
|
|
|
|
|
|
Explosion Proof Hoist
Ideal for hazardous environments, these explosion proof hoist products are specifically designed to meet electrical standards required in hazardous or classified manufacturing and processing areas.
Explosion-Proof/Dust Ignition-Proof
Featuring NEMA 7 or NEMA 9 enclosures, pendants and fittings as well as explosion-proof rated motors as required, EPC-Series electric explosion proof chain hoist products are intended for H-4 operation in Class I environments with flammable gasses and vapors and Class II locations where combustible dust is present. Units are further configured for use in eihter Division I or II rated facilties.
Spark-Resistant Hoist Features
To further reduce the likelihood of inadvertent sparking during normal lifting operations, all EPC Series hoists include spark-resistant features. Each EPC-Series hoist is supplied with rubber bumpers in addition to stainless Steel trolley wheels, load chain, bottom block and hook.
Standard Features
Spark-resistant components
Stainless Steel trolley wheels
Stainless Steel load chain
Stainless Steel bottom block
Stainless Steel safety hook
Rubber bumpers
Universal trolley wheels for flat/tapered flange beams
Sealed gearing with oil bath lubrication
Upper/lower hook position limit switch
Reversing single speed controls for hoist and trolley
Automatic electric hoist brake
Stainless Steel chain container
Lug mounted
230/460 Volts - 60 Hz - 3 Phase
|
|
Ratchet lever hoist with roller chain model C 85
Capacity 750-10000 kg
Ratchet lever hoist with link chain model D 85
Capacity 750-10000 kg
A hoist with an exceptionally long life expectancy. The enclosed housing and housing cover are made of high tensile white malleable cast iron for overall rugged construction. Easy maintenance and repair with virtually unlimited applications.
Features
- The graphite cast iron load sheave forthe link chain has precision machined chain pockets for accurate fit and durability of the load chain.
- The roller chain sprocket is made from heattreated chromium-molybdenum steel with precision machined teeth to ensure smooth chain movement.
|
|
Stainless Steel Chain Hoist | Manual
Featuring sealed gearing and oil bath lubrication, our manual stainless Steel chain hoist products perform critical lifts even after long periods of inactivity in corrosive environments. Wastewater treatment plants, oil refineries and both food and pharmaceutical processors rely on our manual clean room hoist products that set a new standard for corrosion-resistant overhead lifting equipment.
Ideal for periodic use
304/316 Series stainless Steel construction
Stainless Steel gearbox casing and shafts
Food-grade chain and gearbox lubrication
304 series stainless Steel chain
Stainless Steel forged safety swivel hook
Stainless Steel chain container (optional)
|
|
Hand chain hoist model Yalelift 360
Capacity 500 - 20000 kg
Areas of operation as well as operator conditions have been improved in trail-blazing fashion, which goes far beyond the classical hand chain hoist.
Optional
- Overload prevention device
- Chain container
- Stainless steel load and hand chains
- Corrosion resistant versions
|
|
|
The new Yale hand chain hoist VSplus is through further technical development the successor of our proven VS model. We set new standards with the extremely robust all-steel construction and high quality bearings for drive pinion, load chain sheave and gearbox. A maximum of corrosion prevention and maintenance friendliness are special features of this model.
|
|
|
|
|
|
Variable Speed Chain Hoist | Die Setter
Set Dies and Molds Precisely with Ultra Low Speed Hoist Positioning
Specifically designed to improve mold placement accuracy, the two-speed die setter low speed chain hoist features ultra low speed hook movement for exact die positioning as well as the standard speed for normal use. To reduce die impact damage and shock loading conditions, the low speed setting may be set to 1.5 feet per minute without sacrificing the normal lift speed of the hoist.
The variable speed hoist feature permits fine mold positioning without continuous hoist jogging. Low speed hook travel on David Round's die setter hoist is available in both the up and down directions unlike other creep or step-controlled hoists that may only lower at the low speed setting.
With these electric hoists, both the standard and low speed settings may be adjusted in the field to meet specific application requirements. A variery of pendant configurations are available as well as low-speed trolleys, jib cranes and monorail systems.
Position and handle dies at ultra low speeds as low as 1.5 FPM
Various models available from 1/2 to 5 ton load capacities
Position loads precisely with continuously jogging hoist
True vertical lifting path eliminates side-to-side hook travel
Benefits of the Die Setter Hoist
Accurately align mating equipment and mold sections with precise load control Increase hoist motor life by eliminating the need for continuous hoist jogging
Eliminate re-calibration time by gently loading sensitive testing and measuring equipment
Replace expensive air-powered hoists with this economical electric chain hoist
|
|
... see all the products in the category
Hoists
|
|
|
