|
|
Electric chain hoist particularly designed for theatre and staging applications for loads of 125 to 2500 kg.
STAGEMAKER COMPACT is specifically designed for mechanical handling of theatre and stage equipment. It enables sound, lighting and decorative fittings to be positioned and supported safely.
The technical characteristics and upgrade ability of STAGEMAKER have established its essential role in numerous international events whether they could be cultural, sport or commercial.
|
|
Basis on the Eurochain VL the EX version offer explosion protection according to EEx de IIB T4 degree (EN/DIN)as standard :
1 or 2 speeds hoisting motor (according to EExd IIB or IIC).
Pendant push button box with emergency stop button type EExd IIB or IIC.
Electric cubicle and cable plug according to EExd IIB or IIC.
Motor protection IP55 according to EN 60 529.
|
|
The Red Rooster range of hoists is widely used both on- and off-shore, throughout the world; typically in marine, shipbuilding, chemical and petrochemical, food, paint and papermaking industries, wherever reliability of performance and safety in use are paramount. Red Rooster air chain hoists are compact in design and low in headroom. The hoists have infinitely variable speed, and are rated for continuous use.
Another advantage of the air hoists is the soft start and stop. Air hoists do not impose shock loading during acceleration and deceleration. The Red Rooster air hoists are of compact construction with cast iron bodies for durability and safety.
|
|
Eurochain VL is the solution for all your lower and medium load hoisting applications. One of a new range of high-tech hoisting units, Eurochain VL is perfectly adapted to your industrial requirements.
Furthermore, in order to meet your hoisting and mechanical handling needs in the possible way, Eurochain VL can be fitted to manually-driven and electric trolleys mounted into monorails, jib cranes, overhead handling systems or EOT cranes.
|
|
|
The DC-Pro chain hoist for loads up to 5,000 kg is a fully featured, highly versatile chain hoist, which can be installed and put into service in a minimum of time. It is extremely user- and maintenance-friendly and features an ergonomic design with a high standard of safety and reliability. The particularly long service life (FEM 2m+) provides even greater operating efficiency.
|
|
Housing
- Cast aluminium housing with maximum solidity (no plastic material)
- For extreme working conditions: casted cooling gills
Motor
- Design for tough working conditions
- Normal, fast and super fast speed models available
Transmission
- Helical-toothed first and second gear step for quiet running
- Permanent lubrication for wear resistant operation
Brake
- Maximum safety (construction: brake after slipping clutch)
- New advanced brake design
Slipping clutch
- Simple and precise adjustment
- Maintenance free and highly resistant to wear
Chain guidance
- 2-part construction to optimize maintenance
- Reinforced plastic material highly wear resistant
Chain wheel
- Made of hardened steel
- With additional chain pockets (4 mm): hence quiet running
Hoisting chain
- Zinc plated
- Surface-hardened
Geared limit switch (standard)
- Simple adjustment
- Exact positioning
Contactor control system
- Simple technology (no electronics susceptible to interference)
- 42 V control system allowing highest safety of operation
Control switch
- With built-in support wire as a standard
- 2-buttons: design especially ergonomic
|
|
Low headroom version
• designed specially for low ceilings
• block adapted to the load
|
|
Demag DCM-Pro Manulift:
The DCM-Pro Manulift was developed for handling loads quickly and safely with only one hand. The new DCM-Pro is based on the lifting unit of the DC-Pro chain hoist and the DSM-C control unit which is connected to it by a helical cable. Thanks to the control unit which is rigidly connected to the load handling attachment for right and left-handed operation, the operator only needs one hand to operate the chain hoist and guide the load.
|
|
Synchronized hoist low headroom 2 falls
• for absolutely synchronised raising and lowering
• for long and bulky loads
• assures precise positioning of the loads
Synchronized hoist normal headroom 2 falls
• specially for high rooms
• for absolutely synchronised raising and lowering
• for long and bulky loads
• assures precise positioning of the loads
Synchronized hoist 4 falls
• for absolutely synchronised raising and lowering
• for long and bulky loads
• assures precise positioning of the loads
• prevent rotating or pivoting of the load
|
|
~ Hoistaloy load chain for heavy duty or stainless steel chain for spark resistant, medium duty loads
~ Positive action, heavy-duty shoe type brake that holds the load
~ Multi-vane rotary air motor for high torque, smooth operation
~ Accurately machined heat treated alloy steel spur gears
~ Spark resistant models available for hazardous environments
~ Pull cord or pendant throttle control available
~ Pull cord control hoists provide a lightweight, economical hoist for accurate control of loads
~ Made in U.S.A.
|
|
~ Can be used as a work station hoist or as a production line hoist
~ Lightweight, rugged and compact design
~ Capacities 250 - 1,000 lbs
~ Speeds up to 31 ft./min
~ Normal operating pressure is 90 PSI (capacities based on 80 PSI)
~ Standard Protector overload device
~ Variable flow, two lever pendant for precise load spotting
~ Threaded external exhaust for piping away exhaust in clean room or painting applications
~ Small, compact design for commercial & industrial applications
~ Gear train is lifetime - lubricated with non-oxidizing grease
~ Lifetime warranty against defects in materials and workmanship
|
|
Air Chain Hoist capacity up to 100 ton
For nearly 50 years, Ingersoll Rand has been serving the material handling needs of the following industries worldwide: automotive, appliance, aerospace, electronics, food, furniture, glass packaging, printing, pharmaceutical, sheet metal, textile, and warehousing.
The many years of manufacturing experience, ISO 9001 certification, and a 24 hour service network has created a unique ability to respond to your needs with the highest quality material handling solutions, technology, and services available in the world.
Ingersoll Rand has pioneered the development of pneumatic powered lifting, balancing, and handling equipment making us the world leader in the manufacturing of ergonomic, in process, manual assist, pick and place solutions.
With a solid commitment to research and development we have applied our expertise to introduce new products and technology which can also integrate the latest electronics and controls, such as the InteLIFT system: an electronically controlled, air powered intelligent handling solution.
By using Ingersoll Rand solutions created for your material handling needs, you can expect improved productivity mandated by a global economy. At the same time, you can expect ergonomic solutions which improve operator performance and avoid labor downtime due to health or safety issues in using automation
|
|
~ Up to 3 ton capacities for heavy-duty industrial applications
~ Gear train lifetime lubricated with non-oxidizing grease
~ Precision machined and hardened liftwheel with hardened chain guides for precise chain liftwheel fit
~ Gearing designed for exceptionally long life and quiet operation
~ H4 duty standard
~ Rugged control station (NEMA 4)
~ Hoist duty motor, standard Protector overload device and standard screw type limit switches
~ Made in U.S.A.
|
|
STAHL CraneSystems's ST chain hoist programme is one of the most striking and wide-ranging on offer in the world. In use in thousands of applications for decades, modernised and optimised over and over again, the STAHL CraneSystems chain hoist is a classic. The ST series is available in 12 S.W.L. ranges from 125 kg to 5,000 kg.
It can be used as a stationary hoist with a suspension hook, with rigid mounting, with push or electric trolley, and is particularly suitable for rugged industrial applications.
The innovative and pioneering chain hoist design offers considerable economic advantages. The extremely short headroom available as an alternative to every type of chain hoist optimises the effective hook height and reduces wear on the chain. STAHL CraneSystems's ST chain hoist programme is also available in explosion-protected design for Zone 1 and Zone 2 and Zone 21 und Zone 22. STAHL CraneSystems was the first hoist manufacturer to implement the ATEX regulations in the whole chain hoist programme.
|
|
For nearly 50 years, Ingersoll Rand has been serving the material handling needs of the following industries worldwide: automotive, appliance, aerospace, electronics, food, furniture, glass packaging, printing, pharmaceutical, sheet metal, textile, and warehousing.
The many years of manufacturing experience, ISO 9001 certification, and a 24 hour service network has created a unique ability to respond to your needs with the highest quality material handling solutions, technology, and services available in the world.
Ingersoll Rand has pioneered the development of pneumatic powered lifting, balancing, and handling equipment making us the world leader in the manufacturing of ergonomic, in process, manual assist, pick and place solutions.
With a solid commitment to research and development we have applied our expertise to introduce new products and technology which can also integrate the latest electronics and controls, such as the InteLIFT system: an electronically controlled, air powered intelligent handling solution.
By using Ingersoll Rand solutions created for your material handling needs, you can expect improved productivity mandated by a global economy. At the same time, you can expect ergonomic solutions which improve operator performance and avoid labor downtime due to health or safety issues in using automation.
|
|
TÜV-proofed TM-CHAIN BLOCKS and TM-LEVER BLOCKS with carrying capacity of 500 kg to 6 tonnes complete our hoist program. Both designs are delivered with an individual test certificate and a detailed instruction manual. They also have the following advantages:
- minimum effort to raise maximum load
- stocked with high grade chains in grade 80, protected against corrosion through galvanization and yellow chromating
- compact design
- pollution protected closed pinion gear
- weather protected automatic Weston brake
- durable baked enamel paint protection
|
|
STAHL CraneSystems's ST chain hoist programme is one of the most striking and wide-ranging on offer in the world. In use in thousands of applications for decades, modernised and optimised over and over again, the STAHL CraneSystems chain hoist is a classic. The ST series is available in 12 S.W.L. ranges from 125 kg to 5,000 kg.
It can be used as a stationary hoist with a suspension hook, with rigid mounting, with push or electric trolley, and is particularly suitable for rugged industrial applications.
The innovative and pioneering chain hoist design offers considerable economic advantages. The extremely short headroom available as an alternative to every type of chain hoist optimises the effective hook height and reduces wear on the chain. STAHL CraneSystems's ST chain hoist programme is also available in explosion-protected design for Zone 1 and Zone 2 and Zone 21 und Zone 22. STAHL CraneSystems was the first hoist manufacturer to implement the ATEX regulations in the whole chain hoist programme.
|
|
STAHL CraneSystems's ST chain hoist programme is one of the most striking and wide-ranging on offer in the world. In use in thousands of applications for decades, modernised and optimised over and over again, the STAHL CraneSystems chain hoist is a classic. The ST series is available in 12 S.W.L. ranges from 125 kg to 5,000 kg.
It can be used as a stationary hoist with a suspension hook, with rigid mounting, with push or electric trolley, and is particularly suitable for rugged industrial applications.
The innovative and pioneering chain hoist design offers considerable economic advantages. The extremely short headroom available as an alternative to every type of chain hoist optimises the effective hook height and reduces wear on the chain. STAHL CraneSystems's ST chain hoist programme is also available in explosion-protected design for Zone 1 and Zone 2 and Zone 21 und Zone 22. STAHL CraneSystems was the first hoist manufacturer to implement the ATEX regulations in the whole chain hoist programme.
|
|
ABUS Electric Chain Hoists are available for a safe working load up to 4 tonnes and feature user friendly advantages such as:
Extreme low headroom, dual speed lifting as standard, brake linings with exceptionally long lasting wear characteristics as well as a large variety of additional features.
|
|
~ high H4 duty cycle, up to 1,000 pounds and 300 motor starts per hour
~ 10 pocket oblique lay liftwheel provides longer chain wear
~ NEMA 4 industrial rated control station
~ Gear train lifetime lubricated with non-oxidizing grease
~ CM Hoist Alloy Load Chain
~ Dual braking system - D.C. plus regenerative
|
|
The DMK electric chain hoists respond to the needs of the international markets which require products of guaranteed quality with a wide range of uses, long-term reliability, safety guarantees in all phases of operation, and excellent value for money. The DMK hoists stand out for their careful and modern design putting them a the top of their category. The quality of the components, the high technology used in the production of the mechanical parts, in the finishes and in the surface treatments, the constant and checked quality system UNI EN ISO 9001 which covers the company's entire production, allow Donati Sollevamenti to offer a product in line with the latest international standards.
The special water-repellent paintwork is applied with an electrostatic process in complete isolation which guarantees its durability and a constant high performance, also in particularly hostile environments.
The DMK electric chain hoists are part of the lifting products range manufactured by Donati Sollevamenti, a leading company in its filed in Italy, and one of the leading companies in the world in the lifting equipment sector. The warranty lasts 3 years from the delivery date.
|
|
|
ACI's single-phase electric chain hoists are among the most dependable on the market. The MH series was designed for heavy duty applications, which greatly reduces down time and operational costs. Ideal for mechanics and other shop applications, where lightweight hoists and portability count. Operates on standard 110-120V AC, which means you can plug it in just about anywhere! The long fifteen foot power cord plugs into any standard outlet. No three-phase hook-up necessary! ACI chain hoists tolerate large loads with ease and require little maintenance. May be purchased on its own or bundled with a heavy-duty push trolley.
|
|
Shophoist
Easy installation and maintenance
Standard protector overload device
10-pocket,oblique lay liftwheel for smooth chain operation, constant chain speed and reduced chain wear
NEMA 4, industrial-rated control station
Gear train lifetime lubricated with non-oxidizing grease
Alloy load chain for smooth operation and maximum chain life
Thermally-protected hoist duty motor
Dual brake system - D.C. plus regenerative
Rugged cast aluminum alloy hoist frame
Small, compact design for commercial applications
Totally enclosed, non-ventilated hoist frame protects the motor from environmental contamination
Optional impact-resistant chain container is available
Rigid latch style upper hook prevents tangling of power cord
Precision bearings used throughout the hoist
Hardened forged steel latch-style lower hook rotates 360:
True vertical lift
Lifetime Warranty
|
|
STAHL CraneSystems's ST chain hoist programme is one of the most striking and wide-ranging on offer in the world. In use in thousands of applications for decades, modernised and optimised over and over again, the STAHL CraneSystems chain hoist is a classic. The ST series is available in 12 S.W.L. ranges from 125 kg to 5,000 kg.
It can be used as a stationary hoist with a suspension hook, with rigid mounting, with push or electric trolley, and is particularly suitable for rugged industrial applications.
The innovative and pioneering chain hoist design offers considerable economic advantages. The extremely short headroom available as an alternative to every type of chain hoist optimises the effective hook height and reduces wear on the chain. STAHL CraneSystems's ST chain hoist programme is also available in explosion-protected design for Zone 1 and Zone 2 and Zone 21 und Zone 22. STAHL CraneSystems was the first hoist manufacturer to implement the ATEX regulations in the whole chain hoist programme.
|
|
|
The ST chain hoist programme from STAHL CraneSystems ranks among the most distinctive and comprehensive on offer. In use in thousands of applications for many decades, modernised and optimised over and over again, the STAHL chain hoist is a classic. Powerful, reliable and undemanding as regards maintenance and power consumption. The ST series is available in 13 S.W.L. ranges, from 125 kg to 6,300 kg. It can be used as a stationary hoist with suspension hook or eye, with rigid mounting, or with a push or electric trolley, and is particularly suitable for rugged applications in industry. The extremely short headroom available as an alternative for every type optimises the effective hook height while keeping wear on the chain to a minimum. In addition to the standard designs, off-standard versions and individual solutions for customers are available. The STAHL ST chain hoist programme is also available in EX-protected design for Zone 1, Zone 21 and Zone 22. STAHL CraneSystems was the first manufacturer to convert the whole chain hoist programme to ATEX.
|
|
~ Unique Handwheel Cover - Handwheel cover rotates 360 degrees for hoist operation in any direction
~ Ideal for special rigging applications
~ Unique Brake Design - Single disc brake does not incorporate ratchet, pawls,or pawl springs as on other hand chain hoists
~ Fewer parts mean less wear and low maintenance
~ Minimal Maintenance - Easily disassembled, requiring no special tools
~ 5-Year Warranty - Against defects in materials and workmanship
|
|
Manual Chain and Lever Hoists up to 20 ton
For nearly 50 years, Ingersoll Rand has been serving the material handling needs of the following industries worldwide: automotive, appliance, aerospace, electronics, food, furniture, glass packaging, printing, pharmaceutical, sheet metal, textile, and warehousing.
The many years of manufacturing experience, ISO 9001 certification, and a 24 hour service network has created a unique ability to respond to your needs with the highest quality material handling solutions, technology, and services available in the world.
Ingersoll Rand has pioneered the development of pneumatic powered lifting, balancing, and handling equipment making us the world leader in the manufacturing of ergonomic, in process, manual assist, pick and place solutions.
With a solid commitment to research and development we have applied our expertise to introduce new products and technology which can also integrate the latest electronics and controls, such as the InteLIFT system: an electronically controlled, air powered intelligent handling solution.
By using Ingersoll Rand solutions created for your material handling needs, you can expect improved productivity mandated by a global economy. At the same time, you can expect ergonomic solutions which improve operator performance and avoid labor downtime due to health or safety issues in using automation.
|
|
|
The ST chain hoist programme from STAHL CraneSystems ranks among the most distinctive and comprehensive on offer. In use in thousands of applications for many decades, modernised and optimised over and over again, the STAHL chain hoist is a classic. Powerful, reliable and undemanding as regards maintenance and power consumption. The ST series is available in 13 S.W.L. ranges, from 125 kg to 6,300 kg. It can be used as a stationary hoist with suspension hook or eye, with rigid mounting, or with a push or electric trolley, and is particularly suitable for rugged applications in industry. The extremely short headroom available as an alternative for every type optimises the effective hook height while keeping wear on the chain to a minimum. In addition to the standard designs, off-standard versions and individual solutions for customers are available. The STAHL ST chain hoist programme is also available in EX-protected design for Zone 1, Zone 21 and Zone 22. STAHL CraneSystems was the first manufacturer to convert the whole chain hoist programme to ATEX.
|
|
|
The HCH hand chain hoist model is designed using the latest technology and manufactured with quality materials. This chain hoist is compact with low headroom and light weight for easy installation. This hand chain hoist is made with heat treated reduction gears, top hook pivots and swivels for easy rigging. Sealed, pre-lubricated ball bearings provide long service life with low maintenance. This hand chain hoist can be suspended either by push trolley or geared trolley, or simply by its top hook. Hand chain hoists provide a convenient means for hoisting heavy objects. When a chain hoist is used, the load can remain stationary without requiring attention. The slow lifting travel of a chain hoist is also advantageous in that it permits small movements, accurate adjustments of height, and cautious handling of loads. All capacity ratings are metric (1 ton = 2,200 lbs).
|
|
|
