|
|
Verlinde has always been among the first companies to introduce new ideas for the innovation of hoisting units with a hook (more than 70 patents taken out in France and around the world).
The new Eurobloc VT electric wire rope hoist has been created within this avant-garde spirit, as it accounts for a total of 13 patents on its own.
|
|
|
ABUS Wire Rope Hoists lift up to 100 t SWL and provide modern technology with the highest possible reliability levels. They offer very compact design, very easy maintenance and come with precision travel and precision lifting speeds as standard.
|
|
Donati wire rope guarantees maximum safety in hoisting up to 40.000 kgs. The competence and experience in design and production, the quality of componetns used, the high tecnology employed in the production of mechanical parts, in the finish and in surface treatments as well as the certified quality system UNI EN ISO 9001:1994 which regulates all the company's activity, allow Donati Sollevamenti to offer a product in line with the most modern international regularity standards.
The DRH electric rope hoist ensures use in a wide range of situations, reliability over time and safety in all operative phases.
The special hydro-repellent finish, obtained by an electrostatic process, guarantees long life and consistency in performance even in particularly hostile environments.
The company offers a 3-year guarantee starting from the date of delivery, all at a reasonable price.
|
|
The SpeedHoist electric rope winch is specially designed for fast load handling applications with loads weighing up to 160 kg.
It is used when it is not necessary to balance the load or no compressed air is available.
|
|
----SH series steel rope electric hoist have newest designing with quadrate outline, modularize construction, good unitized capability. The fundamental mode combine is very convenient and multiform.
-----The special drive composition method is very stationary which save the usual long transmission shaft.
----The reducer use planet speed @down drive which have high effective , low yawp , long using life.
----Unique column rotor, taper breaking wheel motor with low yawp , disk reliable.
-----With the advanced technology from overseas, the guide rope unit is very reliable and safety.
----High precision and super mechanical spin limiter.
High quality control electric component with low malfunction.
----The products from 400kg to 50t with fully series , which are complied with the up to date international and domestic speciality standard.
|
|
There are two main types of electric hoists:
Chain hoists...
- lift by pulling the chain through sprockets and depositing the chain into a chain container
- are more common for applications below 7.5 tons
- require less maintenance
- are less expensive
- provide true vertical lift at no extra cost
Wire rope hoists...
- lift by wrapping cable around a grooved drum
- dominate the market at 10 tons and above
- offer very fast lifting speeds
- offer a wide array of options
- can be rated H-5 (severe duty)
Both chain and wire rope hoists are rated H-4 (heavy duty) or H-3 (moderate duty). Duty ratings are a better indicator of hoist durability than hoist type (chain or wire rope). Both types use similar motors, brakes and controls. The main difference between electric chain hoists and wire rope hoists is in the design of the lifting mechanism.
Be sure to request an H-4 rating on either your chain or wire rope hoist to ensure long life and low maintenance.
|
|
|
|
|
|
Our Electric Wire Rope Hoist range provides versatile solutions for crane, monorail and replacement applications. The new innovative CXT hoists with superior performance, safety and space saving design for loads up to 80 ton.
- Low headroom trolley
Most common solution employed for single girder cranes and monorails. Most compact design for maximal space utilisation.
- Double girder trolley
Ideal solution for heavier loads used in double girder cranes.
- Normal headroom trolley
Mainly used in monorails when side clearances are restricted or for applications with curved runways.
The CXT wire rope hoists break the traditional mold of design and represent a totally new approach within the lifting equipment industry. The CXT hoists offer:
- Revolutionary Compact Design
The innovative design concept of the CXT makes the high performance hoists smaller in size and lighter in weight. The XT offers exceptional hook approaches and lifting heights. The available space can be utilized better, the floor area and height of the building also. Replacement of old hoist is made easy.
- Easy and Effective Load handling
The CXT hoists offer exceptionally smooth movements and fast load positioning. Inverter control in trolley traveling is standard, which maintains minimal load swing. The innovative design with a large rope drum diameter means that the horizontal travel of the hook during lowering is minimal. Obviously accurate load positioning is faster.
- Exceptional Performance
Konecranes developed for the CXT new high performance hoisting motors, which combines extra power with superior cooling characteristics. These hoisting motors with 60 % ED not only increase performance required even in temporary peak usage situations, but also improve reliability. Two speed hoisting and inverter controlled smooth travelling motion makes the material handling times shorter and boost the productivity.
|
|
NOVA L - Single-girder trolley, compact design
The compact NOVA L single-girder trolley offers optimal installation and approach dimensions and easily accessible electrical and wearing parts.
The electric wire rope hoist has a modular design without any welded parts. Amongst other advantages, it ensures optimal motor cooling even at extremely high power.
|
|
- Hoists from 1 to 50 Tonne
Foot mounted,
Low headroom Monorail, Birail
- Overhead travelling crane kits
from 1 to 50 Tonne
Single girder, Double girder
- Crane end-carriagesfrom
1 to 50 Tonne
|
|
|
|
|
|
Electric Wire Rope Hoist
Space-saving wire rope hoist products expand overhead work space.
Requiring as little as 16" of beam-to-hook clearance (headroom), these wire rope hoists create additional overhead lifting space.
Maximize usable workspace under bridge, jib and gantry cranes.
Increase load clearance over obstacles.
Position loads accurately and efficiently.
Single and two-speed lifts available from 12 to 50 feet per minute.
Carefully position molds and tooling on production equipment.
Accurately load rolls, coils and bulk bags onto processing machinery.
Quickly raise replacement pumps and motors to service platforms.
Lift loads to bench level or high overhead.
Standard lift heights from 20 to 100 feet.
Service and install hard-to-reach equipment from elevated platforms and roof tops.
Incorporate shorter lift hoists for repetitive work station lifting applications.
Raise raw materials, products and equipment from pits and access shafts.
Configure the M55 for specific applications.
Standard and custom options are available.
Equip the M55 for outdoor use and for operation in hazardous environments.
Meet critical application requirements with custom engineered solutions.
|
|
| ... products without technical information |
| |
... see all the products in the category
Hoists
|
CERTI-CRIMP Hand Tools are top-of-the-line, premium, hand-operated tools for
crimping a broad array of terminals, contacts and special wiring devices available
from Tyco Electronics. They are designed to exacting specifications to produce
consistent, high-quality terminations. A potential service life of over 50,000
cycles is possible, depending on operator care.
|
|
The CHAMPOMATOR 2.5
Terminating Machine is a
compact, semiautomatic
bench machine for terminating
multiconductor, jacketed
cable with a variety of
AMP connectors having
insulation displacement
contacts. It is microprocessor
controlled, and programmed
using a membrane-
switch keyboard.
Pertinent information for
operation, including diagnostics
and error conditions,
is displayed on the
control module.
|
|
Product Facts
n Low applied costs
n Terminates most jacketed
cable
n Straight (180) or rightangle
(90) wire dress
n Microprocessor controlled
n Stored program capability
n Selective termination of
connector positions
n Rapid tooling changeover
for different connector types
n Manufactured under an
ISO 9001 Certified Quality
System
|
|
|
|
|
|
Applicators and tooling from Tyco Electronics can be your key to productive, profitable wire harness manufacturing.
These applicators come from a long tradition of quality, reliability, and precision. Manufactured from high grade tool steels, and processed through state-of-the-art CNC equipment for tightest tolerances, our applicators are made for high repeatability and fast throughput.
These standard applicators accommodate most requirements for crimping AMP and non-AMP terminals to produce consistent, high quality terminations. The applicators are available with fine adjust and pneumatic feed and can be designed for nearly any manufacturer's terminal.
Manufactured from high grade tool steels, and processed through state-of the-art CNC equipment for tightest tolerances, Tyco Electronics applicators are made for high repeatability and fast throughput.
Every piece goes through an exhaustive test and calibration process, with each one shipped with test samples verifying operation and full documentation for operation, adjustment, and maintenance.
Tyco Electronics offers an unmatched selection of applicator styles and terminal types, with configurations for both Tyco Electronics and other manufacturers terminals. Styles are available for non-Tyco Electronics terminating machines from both domestic and foreign sources.
At Tyco Electronics we do more than supply the worlds leading applicators. We provide service, technical support, and maintenance and repair, both on site and at our service centers. We know how critical reliable production is, and our products and services are committed to keeping your production running.
|
|
|
|
|
|
AMPOMATOR System III
As your workload changes, the best change for you to make is to the AMPOMATOR System III Leadmaker. It takes maximum advantage of the automation possibilities available with the System III Applicator and AMP-O-LECTRIC ST III Terminator. There's a seamless flow of information, so setup, terminating, and quality control happen virtually without operator intervention. Based on the familiar Alpha 433, with easy-to-use TopWin software.
The Control Center...
The AMP-O-LECTRIC ST III Terminator gives you faster changeover and higher uptime. Featuring automatic adjustment of initial crimp height with stepper motor drive, wire line adjust and control software that makes fine adjustment of crimp height automatically once a connection is established with the iButton module.
Full electronic control for full automation.
It Starts with the Applicator...
The System III Applicator features a better aligned, round ram, an iButton data module for built-in intelligence and a separate feed - independent of the ram stroke.
The System III Applicator combines the best of the past with the thinking of today.
Your choice...
Choose your Seal Loading Unit.
The PAWOMAT SLU is integrated into the leadmaker with an I/O interface. It features improved processing speed and cycle time.
The Komax mci 761 seal applicator is integrated by the MCI interface for seamless operation. The OMI device controls the unit with just two keys and a digital potentiometer.
|
|
Intermediate to high volume rates, up to
600 assemblies per hour
l Flexible platform accommodates one or
two insertion modules as well as
secondary application modules
l Version to handle in-line, radial, and
linear/angularly opposed cavities
l Programmable linear slide and rotary table
l Easy programming through keypad
display
l Palletized fixture system for greater
efficiency and production rates
l Microprocessor controlled
|
|
Product Facts
n No need to strip magnet wire
n Connects up to 3 wires in 1 splice
n Crimp Quality Monitor (CQM)
auto adjusts crimp height and enables 6-sigma process quality
n Height adjusts in .0005 [0.013] increments over .064 range
n Change tooling quickly without major adjustments
|
|
|
|
see the results for the following category : 
