|
|
The DRS wheel block system is a versatile wheel block system with optimum performance ratios for a maximum load capacity – from 2.75 t to 40 t – with compact dimensions. Finely graded sizes (DRS 112 to DRS 500) ensure that the right DRS unit is selected for the corresponding application.
A wide variety of travel wheel designs are available from the standard range to meet customer requirements. The housing, which is machined on all sides, can be connected to virtually any customer design.
Offset and angular geared motors from the Demag modular system are available for the driven variant as individual or central drive units.
|
|
The Demag Travel Wheel System is designed to move loads over a wide range of speeds and applications.
The Travel Wheel System incorporates Demag wheelblocks, which are available in 8 sizes with a wheel load range up to 40 tons per wheel. Our range of travel gearmotors offers smooth acceleration and deceleration. These wheels can be used for transfer cars, cranes or any type of moveable machinery.
|
|
... see all the products in the category
Hoists
|
The radial piston design ensures very high starting torque efficiencies, especially at high pressures where they are most required in mobile applications. Efficiency is typically > 94% at 400 bar.
The maximum torque requirement for wheel motor applications generally occurs with the vehicle al standstill or at low speeds, for example, during acceleration from stand-still or when overcoming an obstacle or slope.
High starting torque in the hydraulic motors therefore means better vehicle performance, less energy wastage and heat generation, especially with frequent stop-start work cycles.
|
|
| ... products without technical information |
| |
HEINZMANN offers compact drives integrated into the wheel hub and complete drive systems for use in light electric vehicles.
The RN Series comprises a brush-type disk motor integrated into the wheel hub and a transmission, with or without integrated freewheel. The motors feature axle ends on both sides, and are designed to be mounted on a fork bracket. They are characterized by their extremely low weight and are used for bicycles, scooters, three-wheelers, rickshaws and various goods transportation vehicles.
|
|
The RN-EC Series are direct drive, multipole, brushless DC motors with a single-sided wheel hub mounting. As well as the drive components, the motors include integrated drive and control electronics, and an integrated mechanical holding brake if required.
When arranged in pairs, the motors can communicate with each other and with a control device (e.g. joystick) using a CAN bus, providing a means for executing steering movements for the vehicle. Applications include: goods transport systems, flat bed carts, cargo trolleys, etc. The drive systems are also available with either handgrip or remote control options.
Single motors are also used as battery-powered, independent actuators for providing rotational and pivoting motion.
|
|
Socony Oven Conveyer Lubricant is a high performance product designed specifically for the lubrication of oven conveyor chains at temperatures up to 200 degrees celsius. It is formulated from a low viscosity oil and colloidal graphite. The oil acts as a carrier for the graphite and can penetrate between the moving parts. The oil is sufficiently volatile at the working temperature to evaporate without leaving residues that might cause sticking.
Socony Oven Conveyor Lubricant is best applied at a low temperature point to allow the fluid to penetrate between the links and pins. As the conveyor moves into a hot zone the carrier evaporates, leaving a lubricating film of graphite. The lubricant may be applied manually by brush or some form of centralised mechanical system.
|
|
| ... products without technical information |
| |
|
Indicated for the grit-blasting to passage of outlines and sheets to you without length limits. Pieces come deal to you on 360° in a single passage.
|
|
Free-flowing machine with rollers is used for continued shotblasting of the corroded layer and filing from sheet metal, sections, simple constructions and small shafts. Treated objects move through the machine on a roller conveyor.
One type of shotblasting machine with roller conveyor is free-flowing machine for blasting cylindrical elements. This machine is used for continued shotblasting of the corroded layer and filings from tubes' surface, round sections, gas steel bottles and other cylindrical elements. Treated objects move throug the machine on a conical cylindrical conveyor or on conveyor with askew wheels.
These machines may be built into highly productive lines for basic colour application, including drying chamber, automatic colouring chamber and drying tunnel.
|
|
Conscious that all the machines are not used in 3x8, Wheelabrator Group designed a shot-blasting machine specifically adapted to the intermittent uses out of metal frame.
The conveyer shot-blasting machine with rollers RB 1500 SmartLine is equipped with 4 turbines high-output Roto-jet judiciously laid out, which allow a cover to perfect sections posed with the horizontal heart. Once granulated, the sections pass in a hopper of brushing-blowing controlled in height, which make it possible to evacuate all the shot of the sections. Those leave the machine clean and vacuum-cleaned.
When designing its machine, Wheelabrator Group stressed the robustness, reliability, and the maintainability of its machines.
|
|
Three series of shot blasting machines
For Pre fabrication shot blasting we offer our series Sprint and Marathon,
for Post fabrication the Triathlon is optimally suited.
In each case it is possible to extend the machine to a complete surface treatment line.
Sprint
The Sprint is our standard model and is ideally suited for shot blasting steel plating, profiles and pipes. The turbines are placed perpendicular to the direction of the conveyor to achieve the highest quality of cleaning.
The Sprint range is often used by steel trade and construction companies.
Marathon
Designed for more demanding work, the Marathon range is ideal for higher conveyor speeds and heavier loads. It is typically used by larger steel traders or steel constructors working multiple shifts and by rolling mills.
Thriathlon
The Triathlon is designed for shot blasting steel constructions. Its turbines are placed diagonal to the conveyor direction to ensure it reaches all angles and crevices of the construction.
These machines are used in many steel construction companies.
The Triathlon is universally applicable and can also be easily applied to plating, profiles and pipes.
Surface treatment line
The GIETART surface treatment lines are the extension of the well known solid and reliable GIETART shot blast machines to a complete surface treatment installation including pre heating, shot blasting, painting and drying. GIETART specialises in the design and supply of complete steel surface treatment systems and every layout engineered by GIETART is custom tailored to the specific operations and requirements of our customers.
|
|
|
Grit blasting machines for plates, sheet irons, beams and structures with roller conveyer for plates,sections and structures.
|
|
|
Laboratory roll mills are machines for testing the quality and processing characteristics of polymer material by means of discontinuous plastification, mixing or kneading. In both, plastics and rubber processing as well as processing of ceramics or special materials, roll mills by Dr. Collin are setting new standards in terms of precision and reliability.
|
|
Mineral Processing
Building material plant
Russia
1x roller mill WM1012
rotor diameter 1000 mm
rotor width 1200 mm
input 5-20 mm, 5-40 mm
output <8 mm
limestone
clay 60 m³/h
|
|
Plain and tooth rolls for intermediate size reduction.
Labtech Essa rolls crushers are designed for rapid, controlled size reduction of ore, mineral or rock prior to metallurgical testing or further milling or grinding. They are typically applied in laboratory or pilot plant applications after primary production of the infeed material in a jaw crusher or similar. The nipping action of two off same diameter individually powered contra-rotating rolls produces an ideal crushing environment for a wide variety of materials. Product sizing is controlled by an (adjustable) gap setting between the two rolls. One roll is heavy duty spring mounted as protection against uncrushable material attempting to pass between the rolls. Roll crushers operate with a minimum of dust generation and produce a material with a tight size envelope containing a minimum of fines.
|
|
| ... products without technical information |
| |
|
... see all the products in the category
Grinders
|
| ... products without technical information |
| |
Roller and Apron Covers
Arnold roller covers offer effective pro-tection even where space is limited. A rewind mechanism ensures that the plastic or steel band is fully retracted. Together with its casing, available as an option, Arnold roller covers can also be retrofitted with minimum time and expense. Combined with a roller cover, or fitted sepa-rately, our Alustar and Aluform apron covers offer a high level of protection against heavy contamination.
|
|
HEMA has been able to position itself on the worldwide market as one of the leading manufactures of flexible protective coverings. Apart from bellows, our core product, this success has been due primarily to our extensive range of high-quality ROLLER cover systems. We can implement and test the technical production requirements of most customer-oriented solutions and develop alternatives quickly in our recently modernized production facilities.
In very small spaces, ROLLER cover systems are an ideal substitute for bellows coverings and do not require a full seal. They can be installed vertically, horizontally or in any combination of these. Leading international manufacturers are already using more than 30,000 HEMA ROLLER systems. The ROLLER Series offers customers a very large selection of different combinations, enabling them to lay out the covering as efficiently as possible. Customers can choose between:
|
|
Its matter, fabric coats indeformable, allows a great flexibility and an effective protection of the slides counter the stains, the chips and the cutting fluid while offering a good esthetics even in high rates of travel.
Deliverable with or without case of protection.
Several tens of matters available according to the conditions of use.
Deliverable with aprons Aluminum or execution reinforced for protections of pit or dangerous passage (possibility of aprons piétonnables)
|
|
Synchronous Autocoupleur with rollers
F | | |
