|
|
VIP-Mini-hook VMH-4
A robust improved version. The safety latch engages in the tip of the hook and is thus protected against lateral bending.
With a triple coiled corrosion protected double leg spring. Connecting bolt and tensioning sleeve are pre-assembled.
|
|
Container Hook VCH 20 with Safety Locking Device
Suitable for ISO container edges. With a patented safety locking mechanism. A clevis connection for the 22 mm VIP chain. Using a VRG - 16 connector, the chain diameter can be reduced and thus a 16mm VIP - chain can be used .
Attention: RUD-VCH 22-Hooks are not suitable for vertical lifting. Given a minimum inclination angle of 30° during the lifting process, the hook cannot automatically open.
Connecting bolt and tensioning sleeve are pre-assembled.
|
|
|
We supply a full range of grade 80 alloy fittings, our products include connecting link, eye self locking hook, clevis self locking hook, swivel self locking hooks, cradle clevis grab hook, eye hooks, master link, master link assembly, shortening clutch, shackle, etc.
|
|
The DSH double swivel hook combines swivel lifting ring and hook in a single element. The DSH swivel hook's self-locking safety latch provides maximum security. The DSH security hook is universally compatible with all fastening systems: fabric slings, chains, ropes, eyes, ...
Double swivel hook DSH characteristics:
Lifting capacity in all directions
Double articulation allows it to line up perfectly with the sling
Fast and universal hooking with any kind of connection (without additional appliances)
High tensile steel (Class >8)
Safety factor 5
Two ways of tightening: either by open-ended spanner or by Allen key
WLL indication engraved
From M8 to M20 as standard; for loads from 0,3 To to 2,5 To
From UNC 3/8'' to UNC 3/4'' as standard; for loads from 1,200 LBS to 5,500 LBS
Each double swivel hook is tested and delivered with a certificate of conformity
Other variants of fitting bolts on request
|
|
Container Hook VCH 10t
Suitable for ISO container edges. A permanent connection using a VVS1/2 or a loose component for hook mounting.
Attention:
RUD-VCH hooks are not suitable for vertical lifting. Given a minimum inclination angle of 30° during the lifting process, the hook cannot automatically open.
Containers 1D, 1E and 1F can be lifted from the top edges using a 4 -leg assembly and a max. inclination angle of 30°
|
|
| ... products without technical information |
| |
- REVOLVING HOOK TO BE LIFTED WITH A FORKLIFT FOR GENERAL CARGO
- SPECIALLY DESIGNED TO HANDLE REELS.
- ALSO AVAILABLE WITH A SUPPORT TO BE STORED WHEN NOT USED.
- SWL = 30Tn IN THE STANDARD VERSION
- TARE = 2.85 Tn
|
|
- HOOK TO TRANSFORM STANDAR FORKLIFTS INTO GENERAL CARGO CRANES.
- AVAILABLE IN A WIDE RANGE OF WORKING LOADS.
- THE STANDAR VERSION IS VALID FOR SWL UP TO 32T
- TARE = 1T
|
|
- THIS IS A BEAM, INCLUDING THE 100 T HOOK, IS DESIGNED FOR HANDLING GENERAL CARGO, SPECIALLY FOR COMPONENTS OF WIND TOWERS.
- IT IS FULLY EQUIPPED WITH WIRE ROPES THAT WORK THROUGH SHEAVE BLOCKS.
- VALID FOR SINGLE AND TWINS CRANES.
|
|
- 20' PLATFORM WITH ROTATORY HOOK.
- WITH THIS TEC DEVICE IT IS POSSIBLE TO CONVERT CONTAINER CRANES TO MULTIPURPOSE CRANES.
- THIS MODEL IS AN ESSENTIAL TOOL IN MULTIPURPOSE TERMINALS.
TARE :: 2700 Kg
SWL :: 80 Ton
|
|
| ... products without technical information |
| |
|
This machine is able to treat both workpieces hanging on a workfixture and workpieces positioned onto a rotating table type unit. Eventually as option, a satellite table assembly is available in order to guarantee a complete and homogeneous finishing also to pieces with complicated shapes.
|
|
Shotblasting installations are provided with hooks or motoriseed hoist for pieces hanging and transporting to be cleaned.
The surface treatment degree is obtained by the translation and rotation combined movement of hanged material in front of turbines.
All our models can be equipped with some optionals to improve the machine performance like inverter regulators on the turbine motors.
Our standard models are devided in two categorie: mod. DELTA (version with manual hooks) and mod. BETA (version with motorised hoist)
|
|
|
The monorail shotblasting machine may have different shapes (straight, Y-shaped or ring-shaped) with manual and automatic piece feed to the cabin. Particularly suitable for treatment of medium-large articles, also of complex shape, hung individually or in clusters on special hooks.
|
|
| ... products without technical information |
| |
|
|
|
|
The double-staggered grip pattern gives Clipper® Wire Hooks exceptional holding power without degrading the integrity of the belt carcass. Today%u2019s splices also have a very low profile, making them increasingly more compatible with conveyor components and compliant with the need to reduced operating noise. Choose from a wide selection of wire diameters, leg and point lengths, strip lengths, and styles.
Unibar® Fasteners: Clipper hooks are welded to a common bar and feature our patented Safety Strip which covers hook point to protect user%u2019s fingers. The welded bar holds hook legs parallel to ease the "meshing" of belt ends and simplify hinge pin insertion. Plus, the welded bar creates a flat, finished splice so belt "wave" is eliminated.
ClipMark™ Series Fasteners: Designed for mono/multifilament conveyor belting and filter media up to 5/32" (4mm) thick, and for pulleys as small as 15/16" (24mm). High width-to-height ratio gives ClipMark™ superior mass and strength for increased reliability.
|
|
Fastener for light duty belts with self locking hooks:
- Clamping effect through the lashes
- Locking of the hooks in the lashes
- Smooth surface
- Maxi. belt thickness 4.5 mm
- Maxi. belt tension 35 N/mm
Material:
Non magnetic Stainless steel AISI 316 or galvanized steel.
Installation: By using a hammer tool.
Packaging:
In standard boxes each containing 4 splices from 300 mm to 3,000 mm belt width in one piece.
|
|
For light duty belts:
Fasteners for the lacing for transmission and conveyor belts.
Material:
Steel wire or stainless steel wire, mounted on a rigid card.
Special Version N° 4 ½ for Round balers with rectangular wire made of high resistance carbon steel (HLE).
Installation:
By using a vise installation tool.
Packaging:
In standard boxes each containing 6 splices 300 mm long (12 strips + 1 nylon wire 1.8 m long).
N° 4 ½ include 6 hinge pins.
Accessories:
Vise installation tool.
|
|
Pneumatic rope balancers with rotating hook for barrels.
Max capacity 100 kg
Max work radius 7 m
On customer request the following can be supplied:
· Fork liftable self bearing base
· Jib cranes or light crane bridge or monorails systems, complete with metal supporting frame, delivered as a turn key project
|
|
FAMATEC STANDARD gives you the reliability of the solution tested and tuned in many other solutions supplied on similar requests. FAMATEC Standard is characterized by short delivery terms and a precise definition of the technical points since the first steps of the offer.
All the solutions from our brands have as common factors the highest care in details and the will to be recognized as product-leader for the quality of the service offered.
|
|
Gore is the leading innovator in developing high performance hook-up wire for the electronics industry. We introduced many of today's PTFE-insulated wire products, improving the speed and quality of signal transmissions in computing, avionics, telecommunications, and applications in harsh environments.
In general, Gore insulated wire products share the following characteristics:
Low capacitance, low loss, fast signal speeds and light weight
Small diameter compared to other products with similar electrical characteristics
Chemically inert
Wide range of operating temperatures
Gore offers the following capabilities in insulated wire products:
Corona-resistant, high voltage cable
Polyester laminate and polyimide film jacketing for high cut-through resistance
High tensile strength, cut-resistant cable
Miniaturized, high signal speed cable
|
|
|
|
