|
|
Modular high-performance CNC-turn-mill-centers
The UniCen is a turning and milling center with integrated B-axis where all requirements for complete machining have already been implemented: turning, milling, drilling and thread-cutting all on one machine. The workpiece is loaded on one machine only and can then be finished completely. With up to five interpolating axes even complex free form faces can be machined.
|
|
|
|
|
|
The Unicom 6000 machining centre is ideally suited for vertical turning and multi-sided machining of complex components. This highly flexible and powerful machining centre for complete machining results from the continuous development of vertical machining centres over a period of more than 25 years.
The concept of Unicom 6000 is based on a moving table with integrated carousel turning station and an interface that can receive pallets of up to 2.500 mm in diameter. The table movement is designated as Y-axis and it runs underneath a traverse with cross slide and spindle carrier. The movements of cross slide and spindle carrier are designated as X-and Z-axis respectively.
Unicom 6000:
4-Axes complete machining centre with HSK100-A interface, carousel turning station and pallet changer. The machine can be equipped with a right angular head or a universal head, in combination with C-axis mode in the carousel turning station.
Unicom 6000-HV:
5-Axes complete machining centre with carousel turning station, pallet changer and HSK 63-A interface in the integrated Unisign Nutator NC machining head as 5th axis, in combination with C-axis mode in the carousel turning station. This configuration is capable of 5-axes machining of complex components.
|
|
Highly productive milling-turning centers with one (MT) or two (MT-TWIN) milling spindles and one or two turning spindle(s) for complete machining of semi-finished products and saw sections.
Maximum workpiece quality by complete machining on one machining center. Workpiece clamping is done by means of clamping chuck or device.
The MT-S is designed for highest flexibility and ideal for small batches. The MT and MT-TWIN series offer maximum productivity for medium and large batches.
Reduction of costs per part by up to 30 % thanks to TWIN technology and 5-axes complete machining.
|
|
|
|
|
|
The Leonard machines are a complete and modular range of Horizontal Lathes for the machining on medium to large work pieces with highest performances in terms of rigidity for rough operations and precision for finishing operations. The main feature of these machines is the technology of the preloaded Hydrostatic ways which are successfully used for both cross and longitudinal slides.
Other machining operations can be performed with the Leonard system, like Boring, Milling or Drilling operations. The different working units can be Combined on a column with rotating base ("B" Axis) or on different Pallets to be manually or automatically installed in the carriage.
The Leonard lathe can be supplied with different type of Steady rests according to the work piece and the required machining.On demand different accessories are available like the work piece probe, the tool probe and the Automatic tool changer.
Safop has developed some special system for the measuring of high sophisticated work pieces like the turbine rotors. The Run Out Measurement System and Blade Measurement System are used with success by the main producers of this type of work pieces.
|
|
Drilling
Machining with coolant supply through the tool, regardless if the tool is in radial, axial or in an inclined position. Accuracy-killing changes between various machines is avoided.
Thanks to very high feed forces and high power also at low speed drills with large diameter can be used with optimum performance. A single look into the speed-power-diagram or the speed-torque-diagram shows the difference...
|
|
| ... products without technical information |
| |
|
The PC 2200 is a state of the art flexible electronic/air column capable of operating with air gauging products and measuring probes. The advanced new column contains a multitude of measuring functions including static and dynamic gauging, classification grading, probe mixing, (A+B), (A-B), etc.
|
|
MEASURING PLUG FOR INSPECTING BORE DIAMETERS
M1 Star is a highly advanced line of measuring plugs developed by TESTAR, a MARPOSS division, for inspecting bore diameters.
The M1 Star MBG (Mechanical Bore Gauge) is the ideal manual instrument for precision measuring of inside diameter, ovality or taper.
|
|
The CMS non-contact capacitive based hole and countersink measurement system has been established as the benchmark in measuring critical holes for military and commercial aircraft manufacturers around the world. Based on its ease of use, speed (measurement accomplished in a few seconds) and extreme accuracy ( /- 5 microns),
It has gained in popularity at various Airbus locations throughout Europe. The CMS system is particularly well adapted to the measurement of tapered holes based on its multi-sensor (48-sensor) approach to inside diameter mapping.
The addition of the CMS product line is a natural extension for Capacitec as they are currently the market leader in the supply of capacitive non-contact gap and displacement measurement sensor systems to the Aerospace market.
For further information, please contact :
Capacitec Europe
16 Rue Sejourné- 94044 Creteil – France
(33) 1 43 39 48 68
eurosales@capacitec.com
|
|
General description
- Modular design, universal bore gauge system for larger bores (M5678 and M68-FB)
- Large measuring range (± 1.5 mm)
- Application range: Ø 26.3 mm to 330 mm/1.03" to 13" (Ø 38.5 mm to 348 mm/ 1.5" to 13.7" for blind bore FB)
- Calibration in setting master or micrometer
- Adaptability to most bore gauging applications
- Blind bore type (FB) in standard programme
- Tungsten carbide contact points
- Holders and depth extensions are manufactured from temperature stabilised material, ensuring minimal gauging errors.
|
|
| ... products without technical information |
| |
|
|
