|
|
| Umicore Tool Materials is a business line of Umicore, serving the markets of diamond tools and hard metal applications. We offer a wide range of Cobalt powders, Nickel powders and pre-alloyed alternatives (from our Cobalite range). |
|
| UltraSoft Diamond-Plate (15/16” thick) is designed for comfort and optimized worker productivity in heavy use production, packaging and lab areas. Exceedingly popular among standing workers, this anti-fatigue mat has a double-thick Nitricellª sponge base for exceptional comfort, rebound and long life. Its high-tech diamond-plate surface resists abrasion and most chemical spills. |
|
The Lynx LCC30 Concrete Chain Saw is used for fast cutting of concrete, reinforced concrete, conduit, brick and other masonry. Plunge cutting and square corner cutting is not a problem.
The LCC31 Concrete Chain Saw is used for heavy duty cutting applications involving concrete, reinforced concrete, brick and other masonry products, and stone. Plunge cutting and square cutting are not a problem. |
|
Scribers
As with the needle embossers, the ÖSTLING scribers are always used when the markings must be extremely long lasting.
ATTENTION!
All ÖSTLING scribers can also be used as particularly high-quality needle embossers if required by simply replacing the needle system (accessory).
Our own scriber brand, PinMark™, has represented reliability and highest precision for many years. Scribers are often used in rough industrial environments in the automotive and steel industry, by tool manufacturers and in mechanical engineering. This is why the robust construction and the innovative detail solutions prevailed in the development of the PinMark™ series.
What materials are marked with scribers?
Solid materials such as
Metal (aluminium, stainless steel)
Cast iron
Graphite
PVC
etc.
Whether as an installation device that can be integrated into your production line, as a benchtop device or as a flexible benchtop device on a trolley: we offer the ideal solution for your applications. |
|
The Vectura Automated Storage and Retrieval System, offered in partnership with Accalon of Sweden, is a state-of-the-art material handling crane designed to carry everything from pallets and containers to cylinders, reels and multiple tote bins.
This modular system is flexible and easily configured for almost any distribution, warehousing or manufacturing application:
- From the floor up to 130 feet
- Single, double, triple, or multi-deep storage
- One load or multiple loads at a time
- One crane per aisle, multiple cranes per aisle, or aisle transfer
- Input/output options
- Cold storage capabilities
The key to the Vectura’s flexibility is the auxiliary mast, which transforms the crane to a long and flexible load-carrying platform. Our modular design allows us to provide you with a standard product that is configured appropriately for your specific application. |
|
Our horizontal carousels are ideal for your high speed order picking, parts delivery and sortation applications. These automated storage and retrieval systems are designed and constructed for the utmost in reliable performance and flexible configuration, all backed by the strongest warranty in the industry.
At the heart of our system, our all-steel horizontal carousels position heavy duty bins to an operator automatically...saving space, reducing labor cost, speeding throughput, and improving order accuracy and inventory control using integrated DiamondWare™ software.
- Single frame size allowing multiple bin sizes and faster deliveries
- "Uniframe" carousels can be double tiered with no additional modification or cost.
- Commercially available AC controllers that are highly reliable and full featured.
- Highly efficient direct drives that provide the fastest retrieval speeds in the industry
- State-of-the-art bin design - heavy guage safety loops at bin front, efficient "fold out" installation
- The highest capacity standard shelves in the industry; 150# standard, with optional capacities available |
|
Our goal was to make a better vertical lift module…and we did. As the leading innovator in vertical storage technology, we developed the SMARTdepot™, the original multi-bay vertical lift module. Based on proven VLM technology, we re-engineered the system to achieve tremendous increases in flexibility, reliability and productivity.
Our patented Cross-bay Technology™ is what makes the SMARTdepot™ different from any other VLM on the market. Our dual-bay design literally doubles the storage capacity of typical single bay units. Then to maximize productivity, our SMART design lets one or more operators retrieve product from any storage bay to any access opening at the same time even on multiple floors. |
|
The Diamond POWERdepot™ Vertical Carousel is our leading edge vertical storage system that delivers maximized space utilization, efficiency and productivity in all types of applications, including small parts and tool storage. We've taken all of the benefits of vertical carousel technology and powered them up to the next level!
- Because walking and searching times are significantly reduced, your picking productivity can be increased up to 2.5 times.
- Our industry exclusive dual-chain guidance system provides for maximum cube utilization, multiple carrier depths, multiple carrier clear heights and widths, all in combination with a maximum carrier capacity of up to 2,200 lbs.
- 100% out-of-balance capabilities allow carrier profiling to be dictated by the user and not the restrictions of the carousel capacity.
- Vertical carousels provide significant space savings over traditional static storage solutions - the increase in storage density can result in floor space recovery of more than 75%!
- The POWERdepot has the largest shelf capacity in the industry - carrier widths of up to 19' increase your productivity and product accessibility by taking what would normally require two units and placing it into one larger unit.
- Dual-motor drive enables greater width capabilities and provides redundancy for continuous up-time
- Our automated storage and retrieval systems are easily interfaced with many warehouse management systems or other host architectures, including the DiamondWare™ suite of software. |
|
Diamond Chain offer a range of British Standard products.
The standard range will cover 05B to 32B sizes and are manufactured to meet all ISO606/DIN8187/BS228 standards.
These are available in simplex, duplex & triplex.
There is also a small range of Oval Contour side plate (08B to 16B) and Stainless Steel 300 series (06B to 16B) product available |
|
Though it's referred to as standard chain, it's anything but. Our Standard Series chains, built to ANSI B29.1 standards, are manufactured to very specific requirements. The only thing standard about our chains are their ability to fit many standard applications. From industry to agriculture, our Standard Series chains are designed to last longer than any other manufacturer's roller chain.
Heavy Series chains, also built in accordance with ANSI B29.1, are designed using link plate material from the next larger size chain. Heavy Series chains are not necessarily stronger than Standard Series chains, but the thicker link plate material provides an increase in fatigue resistance for those drives subjected to heavy shock loads, multiple stops/starts or reversing.
|
|
RING LEADER® O-ring Chain
Diamond%u2019s Ring Leader O-ring chain is specifically designed for applications that don%u2019t permit regular lubrication, requiring the chain to depend entirely upon initial factory lubrication throughout its service life. Depending upon the specific conditions, Ring Leader can provide up to ten times the wear life of standard chain. Industry can introduce contaminants that damage standard chain. Build up on the chain can clog the openings on standard roller chain where lubrication enters the pin/bushing area and these contaminants can even get inside the chain, actually damaging the surface of pins and bushings. Ring Leader O-ring chain is constructed with O-rings that seal a specially formulated lubricant into every joint.
|
|
Stainless Steel Chain
Diamond produces a wide range of Single-Pitch Drive and Double-Pitch Conveyor chains manufactured in four combinations of stainless steel depending upon the specific application. AP Stainless Chain: This chain is assembled using 300 Series (austenitic stainless) link plates, bushings and rollers along with a precipitation-hardened stainless steel pin. This combination increases the wear life of this chain over those constructed entirely of 300 Series components. AP Stainless chains are well suited for food processing, and are approved by the Food and Drug Administration. Stainless steel chain comes in 3 different forms known as the 300, 400 and 600 series; contact Diamond Chain for further information. |
|
Nickel-Plated Chain
Diamond Chain produces a full line of Nickel-Plated roller chains for a variety of uses in environments where the chains are exposed to moisture. Common uses include applications exposed to the weather, high humidity or those on machines that are frequently washed down with water. Diamond Nickel-Plated chain is different from many rust-resistant chains, because Diamond electroless nickel plates all of the components before assembly, virtually eliminating the possibility of stress-corrosion cracking. Pre-assembly plating also ensures all components are plated, which prevents internal rust from seeping out and causing contamination. |
|
These chains are built in accordance with ANSI B29.24 and are dimensionally identical to Standard Series Drive chains, but also incorporate pins produced from medium carbon alloy steel, through-hardened, to give the chains higher working load capacity and additional resistance to fatigue.
Additionally, these chains are produced with solid rollers for increased performance when loading is high, but speeds are slow. Users of these chains should be aware that wear life may be slightly reduced due to the material and heat treatment of the chain pins.
|
|
Standard Pin Oven Chain:
Our Standard Pin Oven chain begins its life as 3⁄4" pitch ANSI chain but that's where the "standard" part ends. We improve this chain?s ability to perform in the harshest of environments by providing the components with the same superior qualities as our industrial drive chains such as: raw material selection and closely controlled heat treatment. Then we incorporate some additional clearances to accommodate the high temperatures of the drying ovens and allow more access for lubricant to enter the critical pin/bushing joint |
|
| Accumulation conveyors are used to control the flow of unit-loads. They can be controlled mechanically or electrically, can be contacting or non-contacting, and can provide low-pressure or zero-pressure accumulation. Typical applications are to create/manage material buffers before downstream handling or prepare loads on multiple conveyors prior to metering or inducting into a sortation system. The application of the conveyor equipment best suited to the task ensures it is used to its peak capabilities. |
|
In partnership with Accalon of Sweden, we offer a full range of pallet conveyor systems. Conveyor systems are the highways of warehouses and distribution centers, allowing continuous material flow and a universal interface to all kinds of material handling equipment and manual operations. If designed to peak requirements, variations in the flow can be handled easily and efficienty.
Our range of pallet conveyor products is based on a modular design, securing the benefits of economy in manufacturing and simplicity in installation. We can fulfill all the conveying and handling requirements of your system - a full range of powered roller and chain conveyors is available, along with other conveyor products such as shuttle cars, pallet dispensers, turntables, profile guages and vertical conveyors.
Complete range of pallet conveyor:
Chain conveyors, straight linked duplex chains for minimal wear of load carrier
Chain conveyors with 2 strands or multiple strands to suit the load
Roller conveyors, pitch, width and rollers to suit load requirement and throughput
Gravity conveyors, including stop and separation units
Transfer units, chain/roller, roller/chain, or chain/chain
Turntables with roller or chain conveyor
Pallet/salve board dispenser
Vertical conveyors, single or multiple loads
Shuttle cars, single or multiple loads - high speed version
Roller conveyor, chain converyor or fork shuttle
Profile gauges - high throughput version
Intelligent pallet control - checks the pallet and, if unsatisfactory, automatically dispenses and places a slave pallet/board under the bad pallet |
|
Diamond Wire Drawing Die Blanks
¡ª¡ªSelf-Supported and Tungsten Carbide Supported Blanks for Wire Drawing Applications.
¡¡¡¡Diamond/PCD wire drawing die blanks from DMD Company have the advantages of longer service life. While drawing metal wires, they embody higher surface finish and brightness.
¡¡¡¡Our diamond wire drawing die blanks are polycrystalline diamond (PCD) products made under ultra-high temperature and ultra-high pressure, they are suitable for high-speed drawing of nonferrous wires such as bronze, aluminum, nickel, stainless steel and other alloy wires.
¡¡¡¡Our diamond wire drawing die blanks have three series: XYH Series,XYR and XYY Series. In each series, there are 4 grain sizes available to choose from based on the application of wire drawing: 3 micron, 5 micron, 10 micron, and 25 micron.
¡¡¡¡XYH and XYR Series diamond wire drawing die blanks contains self-supported PCD die blanks which include the Hexagonal type and the Round type in various sizes. These blanks are suitable for all types of wire drawing applications especially where cost-cutting is required.
¡¡¡¡XYY Series diamond wire drawing die blanks includes tungsten carbide supported PCD die blanks in round shape of various sizes. These products have a polycrystalline diamond core integrally bonded to a tungsten carbide support ring which in turn enhances the strength of the die blanks. These features allow the products stronger ability to withstand wire drawing with high intensity. |
|
Changing the traditional architecture of warehouse and distribution software, DiamondWare Warehouse Execution Software (WES)™ 3.0 optimizes labor and equipment to achieve higher productivity, reduced capital expense and improved return on investment.
WES™ synchronizes order fulfillment, material handling systems, and shipping systems, bringing many traditional execution level functions into one application. This simplifies overall software integration and reduces IT costs by requiring only one interface to interact with the entire system. In addition, because orders continuously flow through the system, overall equipment costs are significantly reduced and the traditional "waves" seen in most systems are eliminated.
The WES™ includes 5 optional modules: Work Planning, Order Processing, Material Flow, Shipping, and the Management Support Suite.
Work Planning
Work Planning verifies the availability of inventory and labor to fulfill orders and releases orders to fulfillment areas in a manner that ensures the highest possible productivity. This module includes several components, such as replenishment, slotting, waveless release, and manpower planning.
Order Processing
Order Processing is the host interface to which orders are downloaded. Orders are then directly executed by the various fulfillment modules or they proceed through the waveless release process. This module manages all types of paperless and automated picking technologies and includes order routing and cubing.
Material Flow
Material Flow handles sortation control, zone routing, and buffer management. |
|
Sortation systems are used when a fairly high flow of cases, totes or pieces need to flow to different destinations. Destinations may be conveyors assigned to individual truck docks, truck routes, customer orders or other order consolidation assignments. There are several sortation technologies used to accomplish these tasks.
Many operations require sort rates less than 30 items per minute. Tote systems, smaller case distribution operations, service parts centers and many other operations require cost effective low rate sortation technologies.
Diverter Arms. The most cost effective sortation devices available are diverter arms. Some are shaped like “baseball bats” and come across the conveyor to deflect products at an angle, 30° typically, onto a different conveyor. Other diverters are curved to divert to product onto a take away conveyor at 90° while maintaining product orientation. Diverter arms can be manually activated, or they can be controlled automatically with scanning technology.
Right Angle Transfers. A right angle transfer operates by engaging the bottom of a unit-load, lifting it off the transportation conveyor and transferring it onto another conveyor at a 90° angle. Transfers mechanisms can be chain transfers or belt transfers. Typical rates achieved are 8 – 20 sorts per minute depending on the size and stability of the product. |
|
POWER CURVE® Chain:
This chain is manufactured using a pin which is both smaller in diameter and slightly longer than its Standard Series version. This design allows for extra clearance between both the pin and the bushing and in overall chain width as well
Plastic Film Feeder Chain:
These special chains are designed for thermoforming applications and unusual conveying applications such as creating polystyrene plates, shrink wrap, blister packs and many other plastic items. The chain features precise, pointed link plates combined with extended pins or straight attachments (for additional rigidity in operation) which make them ideal for conveying plastic film into thermoforming operations. Three models are available for your conveying needs |
|
| Diamond Innovations is focused on continuously providing new cutter options. Advanced engineered polycrystalline cutters are tailored to meet the needs of a diverse and demanding drilling industry. Six Sigma quality in the manufacturing process and sophisticated inspection procedures verify the consistency and uniform structure of each cutter. |
|
|
|
