|
|
Modular high-performance CNC-turn-mill-centers
The UniCen is a turning and milling center with integrated B-axis where all requirements for complete machining have already been implemented: turning, milling, drilling and thread-cutting all on one machine. The workpiece is loaded on one machine only and can then be finished completely. With up to five interpolating axes even complex free form faces can be machined.
|
|
|
|
|
|
The Unicom 6000 machining centre is ideally suited for vertical turning and multi-sided machining of complex components. This highly flexible and powerful machining centre for complete machining results from the continuous development of vertical machining centres over a period of more than 25 years.
The concept of Unicom 6000 is based on a moving table with integrated carousel turning station and an interface that can receive pallets of up to 2.500 mm in diameter. The table movement is designated as Y-axis and it runs underneath a traverse with cross slide and spindle carrier. The movements of cross slide and spindle carrier are designated as X-and Z-axis respectively.
Unicom 6000:
4-Axes complete machining centre with HSK100-A interface, carousel turning station and pallet changer. The machine can be equipped with a right angular head or a universal head, in combination with C-axis mode in the carousel turning station.
Unicom 6000-HV:
5-Axes complete machining centre with carousel turning station, pallet changer and HSK 63-A interface in the integrated Unisign Nutator NC machining head as 5th axis, in combination with C-axis mode in the carousel turning station. This configuration is capable of 5-axes machining of complex components.
|
|
Highly productive milling-turning centers with one (MT) or two (MT-TWIN) milling spindles and one or two turning spindle(s) for complete machining of semi-finished products and saw sections.
Maximum workpiece quality by complete machining on one machining center. Workpiece clamping is done by means of clamping chuck or device.
The MT-S is designed for highest flexibility and ideal for small batches. The MT and MT-TWIN series offer maximum productivity for medium and large batches.
Reduction of costs per part by up to 30 % thanks to TWIN technology and 5-axes complete machining.
|
|
|
|
|
|
The Leonard machines are a complete and modular range of Horizontal Lathes for the machining on medium to large work pieces with highest performances in terms of rigidity for rough operations and precision for finishing operations. The main feature of these machines is the technology of the preloaded Hydrostatic ways which are successfully used for both cross and longitudinal slides.
Other machining operations can be performed with the Leonard system, like Boring, Milling or Drilling operations. The different working units can be Combined on a column with rotating base ("B" Axis) or on different Pallets to be manually or automatically installed in the carriage.
The Leonard lathe can be supplied with different type of Steady rests according to the work piece and the required machining.On demand different accessories are available like the work piece probe, the tool probe and the Automatic tool changer.
Safop has developed some special system for the measuring of high sophisticated work pieces like the turbine rotors. The Run Out Measurement System and Blade Measurement System are used with success by the main producers of this type of work pieces.
|
|
Drilling
Machining with coolant supply through the tool, regardless if the tool is in radial, axial or in an inclined position. Accuracy-killing changes between various machines is avoided.
Thanks to very high feed forces and high power also at low speed drills with large diameter can be used with optimum performance. A single look into the speed-power-diagram or the speed-torque-diagram shows the difference...
|
|
| ... products without technical information |
| |
R25 Bit diameter 33 mm, 1 1/3 inch
Robit Rocktools Ltd, established 1985, is a Scandinavian manufacturer of high quality rock and ground drilling tools for construction, mining and quarrying
|
|
3000 TC Earth Drill
Cranes up to 9T Ton Metre
Drilling Diameter
100 to 600mm
• Highest standard of quality and service.
• Competitive pricing
• Fast delivery times
|
|
Crane attachment rigs
Equipment for execution of bored piles up to diam. 2500 mm (3000 mm using underreamer ) and 102 m max excavation depth. Both rigs can be used together with casing oscillator.
R-25 can drive casing directly with the rotary.
This equipment can be mounted on any type of crane with min 40/50 ton capacity giving high performance and great reliability.
|
|
Stable and robust monobloc design virtually eliminates distortion (one-piece body and fixed jaw).
-The clamping mechanism type can be changed at any time as required.
Any type of vise may be combined with any type of clamping mechanism!.
-The movable jaw can easily be removed to clean the vise body (by pulling out the positioning pins).
-Optional angle driver available.
-Optional swivel base available.
-Many accessories available
The following clamping mechanism are available:
- Manual clamping mechanism with hydraulic power booster.
- Manual clamping mechanism with mechanical power booster.
- Hydro-pneumatic (air over oil) clamping mechanism (6-7 bar).
The spindles are available with adjustable power control. This allows you to preset the clamping pressure before operating the vice.
|
|
ecopos – Drilling machine vice
Protected against drag spin and lift
Secured at the pivot point of the guide rail, ecopos, together with the work piece can be swivelled and slid to any position
Without risk of accident
No injuries, no work accidents, no consequential costs – a firm grip on accident protection, in spite of maximum speed and freedom of movement.
On each machine table
ecopos – set up everywhere thanks to guide rail or patented positioning clamps.
Unique worldwide
Secured at the pivot point of the guide rail, ecopos, together with the work piece can be swivelled and slid to any position within a working area of 120 x 150mm. Secure and protected against drag spin and lift.
|
|
|
As the market leader in precision measuring devices, Acu-Rite products have consistently set the standard of innovation for nearly 50 years. Proudly designed and manufactured in the USA, Acu-Rite products retain a tradition of superior quality and are preferred by machine tool builders worldwide.
|
|
ACU RITE RADIAL makes its radial drill still faster!
ACU RITE radial
Those, high performance position display for radial and high-speed radial drills, which can be served easily.
The collection of the machine motion is made by means of a ACU RITE length measuring system at the arm and - usually - by a friction wheel system at the column. With the help of a further measuring system at the guide also the drilling depth can be measured and indicated.
|
|
Guard for workbench drill or column drill
- PETG screen.
- Adjustable height guard.
- Electrical micro-contact safety system.
- Waterproof switch.
|
|
| ... products without technical information |
| |
|
|
|
|
The AF_10 is a machining centre designed to cut to the utmost the time you have to dedicate to reinforcement fastening operations.
Because it features a loading roller conveyor and an unloading magazine, the bars are stored at exit. Once the profile has been inserted, movement, machining and unloading are all automatic. This way, the operator in charge of welding can take up the bars four at a time, thus cutting times down to the minimum. Or else the operator can dedicate him/herself with greater continuity to other operations required for the preparation of the welding bar.
The AF_10 offers various machining options: it permits having two screw pitch values and two distance values for the first screw from the outer point of the profile (tip of corner in case of 45° cuts, or outer point in case of 90° cuts for the crosspieces). What is more, it also carries out another operation of primary importance (selectable): because it has a lower motor, it drills frames for wall mounting preparation (or other jobs to be verified).
Finally, this is a machining centre which we recommend if you wish to increase the productivity of both a medium-sized workshop or an industrial workshop (in this latter case together with other machining centre and/or cutting/machining units)
|
|
The I.4F is an electro-pneumatic milling machinewith a vertical axis, fitted with a revolving head, equipped with four cutter-holding shafts.
This model allows you to fit four different cutting units with the relevant stops, and to use each time the required unit simply by turning the cutter-support head.
It is also supplied with orienting gripper to obtain cutting at 45° or intermediate angles.
The wide range of extra fittings allows very quick changes in working, saving time wastage caused by errors in setting up, by avoiding disassembly and assembly, with considerable increase in productivity.
|
|
|
|
see the results for the following category : 
