|
|
- Main and counterspindle with the same design and power
- Flexibility and short set-up times due to the Multi Function Units and automatic tool magazines
- Short tool change travels and reduced chip-to-chip times
- Full 5 axis interpolation for the machining of the most complex contours
- Driven tools for all machining tasks in C, Y and B axis
- True turn-mill center with up to 2 motor milling spindles
|
|
The EMCO MAXXTURN 65 makes light work of the most demanding milling jobs, with its high-precision C axis and extremely stiff Y axis with large positioning range. And so you lose neither time nor money in the process, we have greatly increased its rapid-motion speeds and significantly improved its performance. What is more, the EMCO MAXXTURN 65 comes with your choice of SIEMENS or FANUC control systems.
Technical Data
Main spindle
Bar capacity Ø 65 (76) mm (2.6 (3)")
Chuck diameter Ø 250 mm (9.8")
Maximum drive power 29 kW (38.9 hp)
Maximum speed 5000 rpm
Counter spindle
Chuck diameter Ø 200 mm (7.9")
Maximum drive power 22 kW (29.5 hp)
Maximum speed 7000 rpm
Turrets all driven
Maximum drive power 6,7 kW (8.2 hp)
Maximum torque 25 Nm (18.4 ft/lbs)
Maximum speed 5000 rpm
Travel
Travel in X/Z 260/610 mm (10.2/24")
Travel in Y 80 ( /%u201340) mm
(3.1 ( /%u20131.6)")
|
|
Because just like its big sisters MAXXTURN 65, 95 and 110, the MAXXTURN 45 is also a well high perfect solution for low-cost complete machining off-the-rack. Fitted with a counter spindle, driven tools, a high-precision C axis and very fast rapid-motion speeds, the MAXXTURN 45 offers everything the customer needs to manufacture complex turned and milled parts, not only in high quality, but also cost effective. A very special highlight of the new MAXXTURN 45 is the Y axis. It has been integrated into the machine structure and stands on extremely wide-set guide rails. This ensures extreme stiffness and top precision, even when performing difficult cutting tasks. In addition, the MAXXTURN 45 has a Y axis with a very large travel, which also increases the number of machining options when turning and milling. The MAXXTURN 45 is available with either a SIEMENS or FANUC control unit – and SHOPTURN or Manual Guide are standard equipment.
|
|
The EMCO MAXXTURN 95. The new measure of all things. Thermostable, highly productive and high-precision. We make sure it is with a water-cooled hollow-spindle motor, an extremely accurate C axis and a very stiff Y axis with large travel. And so all these features don't make you lose control, the MAXXTURN 95 is available with either a FANUC or a SIEMENS control unit.
Fields of application:
Hydraulic/pneumatic components
Motors and motor vehicle parts
Machine components
Medical technology
Friction and antifriction bearing parts
Materials-handling technology
Mounting technology and many more besides
|
|
The EMCO MAXXTURN 110 takes care of the most demanding turning and milling operations just as perfectly as the machining of precision parts with the highest-quality surfaces. We make sure of this with a high-precision C axis and a very stiff Y axis with large travel. On top of this come the very high rapid-motion speeds and the optimum performance. Your choice of FANUC or SIEMENS control unit. The EMCO MAXXTURN 110: Quite a piece of work.
Technical Data
Main spindle A2-11"
Spindle bore in drawtube 110 x 1000 mm
(4.3 x 39.37")
Max. Power 42 kW (56.3 hp)
Max. Torque 2000 Nm (1474 ft/lbs)
Maximum chuck diameter 400 (500) mm
(15.7 (19.7)")
Tool turret
Speed range 0 - 4 000 rpm
Power max. 10 kW (13.4 hp)
Torque max. 70 Nm (51.6 ft/lbs)
|
|
UT-300/UT-300L Features :
- Powerful 18.5 kW (peak) spindle drive
- Color LCD monitor packed with standard features
- User-friendly control panel and software
- 30o slant bed provides a rigid foundation plus smoother chip disposal and - easy operator access
- Reliable cam indexing 12-station hydraulic turret
- C-axis control and VDI 40 turret with live tooling available
- Extra long 1200 mm Z-axis travel available
|
|
UT-200 Features :
- Powerful 15 kW (peak) spindle drive
- Color LCD monitor packed with standard features
- User-friendly control panel and software
- 45o one-piece slant base casting for high rigidity and durability
- Robust and reliable 8-station, cam-indexed hydraulic turret
- C-axis control and VDI 30 turret with live tooling available
|
|
CNC Turning Centers
Uncompromised performance and specifications
Produced in Mazak's 8 Cyber Factories around the world, Mazak CNC Turning Centers provide the performance you have been looking for. From 2-axis turning to the most advanced twin spindle, multi-axis machines, from compact to heavy duty, Mazak has the turning centers to meet your needs.
|
|
The VTC Series combines the traditional power, rigidity and versatility of our vertical turning center design with increased capacity, a flexible tooling system and a choice of high-performance controls. The open workzone and wide access to the part area facilitates operation and loading of parts. Rapid traverse rates on the new VTC series reduce cycle times. The six models available offer a wide range of machining capability and productive features.
WedgeLock Tooling System with 33,000 lbs of clamping force produces a rigid connection between holder and the ram for heavy-duty metalcutting. The WedgeLock system accepts standard modular tooling.
Hydrostatic Ram with high dynamic stiffness and superior damping enables accurate heavy cuts.
Linear Scale Rail Leveling and Locating for precise, flexible machining.
|
|
CNC Automatic Lathe SC-20
- Low price and satisfactory standard specifications.
- Low production cost due to reduction of materials.
- Headstock and tool post configuration of high rigidity and high precision.
SPECIFICATIONS
Max. machining diameter 20mm(25/32in)
Max. headstock stroke Bar diameter×2.5(max.55mm)
4-spindle sleeve holder (for front working side)
- Max. drilling capacity 10mm(25/64in)
- Max. tapping capacity M8×P1.25
Power-driven attachment
- Max. drilling capacity 6mm(15/64in)
- Max. tapping capacity M5×P0.8
Main spindle speed max.10,000min-1
Main spindle motor 2.2kw/3.7kw
Power-driven att. spindle speed max.5,000min-1
Power-driven att.drive motor 0.4kw
Dimension(W×D×H) 1,855×1,060×1,750mm
Weight 1,600kg
|
|
The INTEGREX is the most widely used multi-tasking machine tool in the world.
Mazak multi-tasking machines have been well received by customers all over the world. Equipped with the MAZATROL MATRIX and many newly developed features, Multi-tasking machines provide innovation to 21st century manufacturing industry. From raw material to finished component in a single machine set-up: "DONE-IN-ONE".
|
|
The Unicom 6000 machining centre is ideally suited for vertical turning and multi-sided machining of complex components. This highly flexible and powerful machining centre for complete machining results from the continuous development of vertical machining centres over a period of more than 25 years.
The concept of Unicom 6000 is based on a moving table with integrated carousel turning station and an interface that can receive pallets of up to 2.500 mm in diameter. The table movement is designated as Y-axis and it runs underneath a traverse with cross slide and spindle carrier. The movements of cross slide and spindle carrier are designated as X-and Z-axis respectively.
Unicom 6000:
4-Axes complete machining centre with HSK100-A interface, carousel turning station and pallet changer. The machine can be equipped with a right angular head or a universal head, in combination with C-axis mode in the carousel turning station.
Unicom 6000-HV:
5-Axes complete machining centre with carousel turning station, pallet changer and HSK 63-A interface in the integrated Unisign Nutator NC machining head as 5th axis, in combination with C-axis mode in the carousel turning station. This configuration is capable of 5-axes machining of complex components.
|
|
High Productivity, Versatile & Integrated Lathe
High Speed, High Accuracy
High Rigidity, ensures Long Tool Life and Machining Accuracy
Integrated Operation
Easy Control
Convenient Operation
|
|
|
QUEST-CNC turning centers are unlike all competitive machine tools. They are available with a wide selection of multi-tasking features and include our world-renowned, unique jaw chuck/collet-ready spindle. Our super precision models are industry recognized for their superior rigidity and unparalleled "hard turning" capability.
|
|
RS-Series - High Performance
RS-Series turning centers are unmatched in the industry for high precision. Vibration control, thermal stability and accuracy result in superior part roundness, surface finish and unparalleled SPC (statistical process control) capability.
SR-Series - High Performance Chuck & Bar
SR-Series turning centers redefine the meaning of strength and reliability, creating a new benchmark in the industry for turning centers utilizing a 3-jaw chuck.
Quest Series - High Performance
QUEST-CNC turning centers are unlike all competitive machine tools. They are available with a wide selection of multi-tasking features and include our world-renowned, unique jaw chuck/collet-ready spindle. Our super precision models are industry recognized for their superior rigidity and unparalleled "hard turning" capability.
Elite Series - Performance
ELITE-Series II turning centers offer our unique jaw chuck/collet-ready spindle, live tooling, C-axis contouring and tailstock as standard equipment. ELITE turning centers will allow you to reduce operating expenses, while improving flexibility and throughput, at an astounding price.
Talent Series - Performance
TALENT-CNC turning centers are outstanding machines for the price. These rigid and reliable machines feature a robust one-piece cast iron base, heavy-duty linear guideways and ballscrews, and many standard value-added features. Choose from the numerous productivity options and you will truly have a versatile machine at a great price.
SV - Standard
SV-Series turning centers - Superior Value - We know how important it is to get a quality CNC turning center at an awesome price! The SV-Series does just that... these turning centers are outstanding machines that rival, and in some cases beat, all of the well known low-priced competitors when it comes to features and price!
|
|
|
The high-end model of the long-selling BNC Series carries Miyano's tradition of automatic barwork. Designed for processing small workpieces, it features live tooling and easy setup change between bar and chuck work. Many hours of unmanned operation is supported by the latest NC functions and a variety of options.
|
|
Turning Machines
Toshiba Machine Machinery's policy is to apply the latest and most advanced engineering technologies in the design and manufacturing of their products. Producing everything from start to finish, from the castings to the control systems, Toshiba Machine supplies high-quality machines to such industries as the aerospace, heavy-electrical equipment, automotive, nuclear-power, electronics and other industries where high precision is a prerequisite.
|
|
Turning Machines
Toshiba Machine Machinery's policy is to apply the latest and most advanced engineering technologies in the design and manufacturing of their products. Producing everything from start to finish, from the castings to the control systems, Toshiba Machine supplies high-quality machines to such industries as the aerospace, heavy-electrical equipment, automotive, nuclear-power, electronics and other industries where high precision is a prerequisite.
|
|
Turning
Turning tools can be swiveled 180° for left-and right hand side operations or inclined in the B-axis. 50% machining time reduction by 4-axes turning. High metal removal due to high torque.
ID-turning
For long ID-turning operations the MILLTURN offers a heavy-duty dovetail accommodation for excellent support of long boring bars. U-drills, rotating deep hole drilling tools with internal coolant supply. Vibration damped boring bars can be used up to a dia. – length ratio of 1 : 14.
Also NC-controlled contouring boring bars (trepanning) can be used, e.g. for jet engine shafts with small ID´s.
|
|
Highly precise 6-sided complete machining of complex workpieces has never been easier than with the expanded GMX linear series. The new GMX 250 S linear with dual channel shop-floor programming - for programming time reductions of up to 70% in comparison to DIN. In addition, the new GMX 200 S / 250 S linear machines are easy to operate, due to shop-floor oriented visual programming and 3D-simulation with collision control. The GMX linear series machines deliver perfect performance, whether for turning, boring or milling of chuck, bar and shaft workpieces.
|
|
|
The NILES-SIMMONS C-Series consists of modular CNC turning and milling centers of sizes N 30 MC, N 40 MC and N50 MC for complete machining processes of large rotationally symmetrical workpieces. Single- and multislide units can be chosen as the basis of the machine. Thanks to the modular system, the basic unit can be supplemented with a variety of different accessories: a universal turning-boring-milling head, an additional milling unit or a turning and boring slide rest for heavy-duty cutting tool disc revolver are just a few examples of the outstanding flexibility of the NILES-SIMMONS C-series.
|
|
Milling-turning centers with one milling spindle and one or two turning spindles for fully automated complete machining from blank bar or from chuck.
Maximum workpiece quality by complete machining on one machining center.
Highest flexibility - Milling, drilling, thread cutting, external/internal turning, facing and contour turning - all machining technologies are possible.
Minimum setup cost and setup time thanks to innovative chucking concept - reduction of throughput time by 70 % - idle time becomes a foreign word.
|
|
|
The C series is based on the slant- bed machines of sizes N 30, N 40 and N 50. The basic assemblies and components such as the bed, lathe spindle and driving units as well as the tailstock or counter spindle are identical with those from the lathe series. Single- and multi-slide concepts are available as parts of a modular design system.
|
|
Highly productive milling-turning centers with one (MT) or two (MT-TWIN) milling spindles and one or two turning spindle(s) for complete machining of semi-finished products and saw sections.
Maximum workpiece quality by complete machining on one machining center. Workpiece clamping is done by means of clamping chuck or device.
The MT-S is designed for highest flexibility and ideal for small batches. The MT and MT-TWIN series offer maximum productivity for medium and large batches.
Reduction of costs per part by up to 30 % thanks to TWIN technology and 5-axes complete machining.
|
|
|
QUEST-CNC turning centers are unlike all competitive machine tools. They are available with a wide selection of multi-tasking features and include our world-renowned, unique jaw chuck/collet-ready spindle. Our super precision models are industry recognized for their superior rigidity and unparalleled "hard turning" capability.
|
|
For the 4 axes turns and turn centers the same as already stated for for the previous models applies, except that this is the one with the largest production capability produced bi IMT Intermato {turning diameter up to 1200 mm. and a maximum diameter up to 1208 mm. allowed).
The S32 and the S50 turns series successfully demonstrate the conception of modular design and construction that up to now lead to IMT Intermato's success.
|
|
Our concept for turning from 2 to 8 axes.
STRUCTURE - STRUCTURE
This robust structure, of high stability, rests on a cast solid base.
The advantages of the reconstituted Granite are multiple:
Rigidity:
Rate of depreciation 8 times higher than the cast iron.
Reduction by 3 of the amplitude of the vibrations in machining.
Thermal stability: Conductibility 15 times lower than the cast iron.
Results on machining: Improvement of the surface quality.
High degree of accuracy of machining.
Behavior of the coasts.
Increase of 30% of the lifespan of the tools
PINS - SPINDLES
DELTAMAB 400:
Stitch of 8 " with passage Ø 73 mm (4500 rpm - 15/23 kw) equipped according to version tools or production, of a manual chuck Ø 250 mm or of an automatic chuck Ø 230 Misters.
Option: Stitch of 8 " with passage Ø 105 mm (3200 rpm - 22/36 kw).
DELTAMAB 600:
Stitch of 8 " with passage Ø 105 mm (3200 rpm - 22/36 kw) equipped according to version tools or production, of a manual chuck Ø 315 mm or of an automatic chuck Ø 280.
|
|
|
|
