|
|
| ... products without technical information |
| |
| ... products without technical information |
| |
ASTEEL SENSOR's sensitive edges are complete safety electric systems which integrate a sensor and an automatic control module.
ASTEEL SENSOR's sensitive edges are particularly fit in with applications such as : elevating platforms, without driver transport systems, machines' automatic doors, presses
The ASTEEL SENSOR choice :
- The system is independent from atmospheric pressure, temperature and vibrations.
- A 4 wires technology ensures the redundancy of the safety chain
- Possibility to connect several sensitive edges on the same automatic control module.
- Sensitive edges are available either with standard dimensions or on-measure according to your specifications |
|
| The SK-Series Control Relay is designed to be used in conjunction with safety elements such as Safety Contact Mats, Safety Contact Edges or Safety Contact Bumpers. The SK series relay utilized a current principle for monitoring the safety contact elements. This method of monitoring makes certain that the high demands for fault recognition as well as for safety are met. Relay switch status along with operating voltage status is displayed via LED’s. SK Series Relays are available in a variety of models depending on the application and conform to safety categories 2 and 3, EN 954-1 and are certified. |
|
Safety Edges are used to protect dangerous closing edges at automatic doors and gates, shutters, vehicle doors or in the machinery industry. Depending on the force and speed of the moving part a suitable rubber profile has to be selected. Bircher Reglomat safety components are developed and certified to meet todays European Safety Standards.
|
|
From lifting platforms to machine doors, from sliding shelves to roll-up gates - the Mayser Safety Edges based on the closed circuit principle reliably protect persons from potentially dangerous automatic movements. Slight pressure is sufficient to avert the danger.
Whatever you want to protect with the aid of Mayser Safety Edges - you will find them in the required length. In addition to the comprehensive standard range, customized versions are available, too. Even angled Safety Edges and Safety Edges without dead zones are possible.
|
|
| Applications such as machine guards, lifting tables, theatre stages and many others are typical. Safety edges, when activated, will immediately switch off the power source. Prior to the launch of the Haake safety edge, either electrically operating devices to the N/O principle (two conductive strips or layers are brought together when the safety edge is operated), or opto-electronic systems (a light beam is interrupted) were the standard product options available on the market. Such devices operate via signals, which need to be transformed and processed via a control unit. |
|
Bumpers ASTEEL SENSOR are complete electric systems of safety, which integrate a sensor, sensitive to a force of actuation, as well as an enclosure of self-checking.
Sensitive bumpers ASTEEL SENSOR are particularly adapted for the applications such as: wire-guided carts, forklift trucks, installations with automatic displacement, gantry cranes.
Choice ASTEEL SENSOR:
- System independent of the atmospheric pressure, the temperature and the vibrations.
- Technique with 4 yarns to ensure the redundancy of the chain of safety
- Possibility of connecting several devices sensitive to the same enclosure of self-checking.
- Models available with standard dimensions or to measure. |
|
ASTEEL SENSOR's sensitive mats are complete safety electric systems which integrate a sensor and an automatic control module.
ASTEEL SENSOR's mats are particularly fit in with applications such as : robots, machines, assembly lines, vertical storage warehouses.
The ASTEEL SENSOR choice :
- The system is independent from atmospheric pressure, temperature and vibrations.
- A 4 wires technology ensures the redundancy of the safety chain
- Possibility to connect several sensitive mats on the same automatic control module.
- Sensitive mats are available either with standard dimensions or on-measure according to your specifications |
|
| An Omron STI Universal Safety Mat system (UM series safety mat combined with an MC3, MC4, or MC6) offers a simple method for guarding personnel around hazardous machines. A safety mat system offers freedom, flexibility, and reduced operator fatigue when compared with traditional guarding methods such as interlocked fences, pullback restraints or perimeter barriers. Full visibility of and access to the work area is maintained. |
|
When actuated, tactile safety monitoring devices stop the hazardous movement. The diversity of applications requires constructively different devices.
The safety edges of the SL range are suitable for safeguarding crushing and shearing points, that can be present on guards, lifting tables and platforms, mobile storage shelving, operating process tables, storage lifts, lift doors, loading ramps, lifting and tilting devices or industrial gates. They immediately stop the dangerous movement, thus preventing injury or destruction.
The safety flaps of the SL 300 range are designed for the protection of man and machine at machines with wide material input or feed areas.
The safety mats of the SMS 3 range are used to protect surfaces in danger zones on machines and plants with dangerous movements. Depending on the shape of the area to be protected, multiple safety mats can be electrically connected. When the safety mat is actuated, a signal is evaluated and the machine stop is initiated.
In combination with a connected safety-monitoring module, the three above-described systems achieve control category 3 or 4 to EN 954-1.
|
|
| ASO´s Safety contact bumpers are designed as safeguarding equipment to be used on transport vehicles, AGV’s and other freely moving systems. Upon contact with an obstacle, the quick response time of the bumper initials an immediate stop signal while the soft foam core provides a long braking and over-travel path. ASN bumpers consist of a foam core attached to an aluminium profile and are covered in a durable NBR rubber or vulcanized polyurethane which provides excellent protection against damage and moisture. Bumpers are available in various lengths, widths and heights to fit most any application and are available in black, yellow, black-yellow stripe as well as custom colors. |
|
Do you have to make a long stopping distance safe? Do you require good optical integration in the safety technology of your machine? And do you nevertheless want maximum protection for persons and objects?
Mayser Safety Bumpers, impact cushions made of soft foam with a polyurethane skin with built-in safety cut-out, expand the spectrum of safety technology at Mayser especially for these cases.
The soft foam body prevents injuries to personnel and damage to property until a safe standstill is achieved. This safety system is also monitored and provides a high degree of safety.
In addition to the standard product line based on four carrier profiles, there are many possibilities for adapting the design and function of Mayser Safety Bumpers to your individual requirements.
Applications:
|
|
In certain applications, the power-operated devices have, due to their inertia, long stopping times and thus also large stopping travels. Examples are big and heavy doors (hangar doors), automatically-guided vehicles (AGV), theatre stages etc. Here so-called bumpers are used. Their dimensions as well as the positions and number of the contact chains are specially selected and manufactured for the intended application.
Bumpers are protection devices for large over-travels. They are equipped with a rubber-foam cushion with suitable surface finish and reinforced if necessary. Colours may also be applied. |
|
ASO´s Safety contact mat ASK is designed for safeguarding sections of hazardous areas where working machinery may present a potential danger.
Pressure on the mat triggers a control signal to immediately stop a device thereby averting any potentially dangerous situations. The quick-action signal is sent via a surface area switch design that is totally encased in polyurethane to insure impermeability to moisture. Optional surface materials such as aluminium, stainless steel or oil resistant coverings are available to ensure precise installation. In special cases these contact mats may be used as switch mats in applications such as controlling on automatic door. |
|
Bircher Reglomat contact mats are tactile sensors that form safety systems of safety category 3, when used together with our switching units of the ESD-3 series. They fulfil the standards EN954-1 and EN1760-1.
The mats serve to detect people and objects, safeguard danger zones or can also be used as a switching element for comfort applications.
Due to their sturdy construction and high response sensitivity, Bircher Reglomat contact mats are specifically suited for applications in industry, in door/industrial door construction and in public transport. They are available in different shapes and designs, including the complete mounting accessories.
|
|
Safety contact rails are commonly used as break contacts on printing rollers and cutting machines. The rails consists of an aluminium support profile, C-profile, into which is fixed a rubber profile contact strip.
Bumpers are employed on automatic production lines to minimise danger to both people and machines. The large foam rubber cushions enable long practical braking and run through distances, thus enabling designers to optimise protection to both personnel and machines.
The ASK Safety Mat is used as personal protection within the dangerous areas around presses, robots, production lines, machines etc. When connected to a suitable monitoring system stepping on the Safety Mat will immediately be detected causing dangerous machine movements to be stopped. This is made possible by the detection of electrical contacts closing within the sandwich construction of the Mat.
|
|
Whether for machines, robots or transfer lines - Mayser Safety Mats offer maximum protection for hazardous areas of movement ror any shape of area.
Depending on requirements, there are safety mats with rubber surface topping for anti-slip protection and/or to avoid the danger of tripping - also with matching ramp rails.
|
|
| To protect persons against risks of this kind, pressure sensitive safety mats are employed. At devices such as machines, machining centres, presses, robot cells, high-shelf warehouses and many others, safety mats immediately switch off the power source, when the mat is stepped on. As long as the person stays on the mat, the machine cannot be set back into operation. |
|
Larco manufactures presence-sensing mat systems used in pedestrian control, ticketing, pedestrian safety, and equipment status. Larco engineers these mat systems to customer specifications, fitting the exact shape and style for area allocated.
Examples include:
- Passenger control including ticketing and flow diversion
- Hazard avoidance on platforms and tramways
- Operator or driver notification of passengers in limited or
restricted access areas
- Data collection (passenger counting) input to central
monitoring system used in matching peak passenger usage
and vehicle allocations to optimize traffic flow for ground
transportation systems (bus, train, and subway). |
|
| ... products without technical information |
| |
- Package sizes from 4.2 x 4.2 mm to 12 x 12 mm
- SMT and through-hole models
- Numerous options : tactile feedback, sealing, ESD protection... |
|
| The LL1105 series thru-hole tactile switch is rated to 5 million cycles. With reliable dome technology, strong tactile/audible feedback and multiple operating force options, this 6mm x 6mm switch offers reassurance to the design engineer who needs a quality long life switch. Applications include the telecommunications, consumer electronics, medical, audio/visual, testing and instrumentation markets. |
|
Features/Benefits:
- Long and soft actuator
- Distinctive tactile feel
- 1.1 & 3 N actuation force
- Ground terminal optional
- RoHS compliant and compatible |
|
|
|
see the results for the following category
